Hallo Leute,
habe einen 1018. FW ..26 mit Plugin-Unterstützung ist drauf. Plugin ist installiert. HDFreaks.cc Bootloader ist drauf.
USB-Stick mit dem USB-Tool erstellt und eine Datei hdd auf die FAT mit drauf gemacht (Platte ist mit drin). Beim Hochfahren bleibt das Teil bei "Boot Enigma" steheh.
Weiß jemand Rat?
Hier mal die Putty-Ausgabe:
habe einen 1018. FW ..26 mit Plugin-Unterstützung ist drauf. Plugin ist installiert. HDFreaks.cc Bootloader ist drauf.
USB-Stick mit dem USB-Tool erstellt und eine Datei hdd auf die FAT mit drauf gemacht (Platte ist mit drin). Beim Hochfahren bleibt das Teil bei "Boot Enigma" steheh.
Weiß jemand Rat?
Hier mal die Putty-Ausgabe:
U-Boot 1.3.1 (May 20 2010 - 20:28:30) - stm23-0032
---special HD Freaks maxiuboot --- sponsored by TDT and SoLaLa---
DRAM: 128 MB
Flash: 32 MB
In: serial
Out: serial
Err: serial
init Frontpanel... done, Twintuner model
Hit any key to stop autoboot: 0
bootmenu_timeout:8000,default:0
add entry:0 - Auto_Boot
add entry:1 - empty
add entry:2 - empty
add entry:3 - empty
add entry:4 - empty
add entry:5 - empty
add entry:6 - empty
add entry:7 - empty
add entry:8 - empty
add entry:9 - empty
entering bootmenu - default:0 - Auto_Boot
USB: scanning bus for devices... USB0 COS Memory 0CC0D37143902AD7
3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
reading hdd
0 bytes read
reading uImage
............................................................................................................................................................................
1766795 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.17.14_stm22_0041
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1766731 Bytes = 1.7 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel console=ttyAS1,115200 root=/dev/sdb2 rw rootdelay=10 ip=10.100.200.56:10.100.200.1:10.100.200.1:255.255.255.0 mem=128m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:00:1E:B8:00:72:27 - 0x00000000 - 0 ...
Danke und Grüße
Alibaba7
---
"Wer das Fliegen lernen will, kann nicht mit dem Laufen anfangen. Man muss erst lernen auf beiden Beinen zu stehen." (Friedrich Wilhelm Nietzsche)
---
Atevio 7000 HD PVR mit HDF v6 Update 1 | 2x DBox2 Philips S
Alibaba7
---
"Wer das Fliegen lernen will, kann nicht mit dem Laufen anfangen. Man muss erst lernen auf beiden Beinen zu stehen." (Friedrich Wilhelm Nietzsche)
---
Atevio 7000 HD PVR mit HDF v6 Update 1 | 2x DBox2 Philips S