Zitat von gorski: „LCD gives "3SAT HD" and - nada/zilch/zippo/nichts!“ As I wrote: I have only astra 19.2 and those channel list ist on board. For other positions you have to scan, or put your own lists with e.g dreamset to the Image. Also the Image starts in PAL resolution. The rest I don´t understand: my win2008 system doesn´t work without user and pass, so leave it empty.

Zitat von mohousch: „@DBO: is automount built in the image?“ Of course the automounter is included. I use it with my own script for searching the physical usb devices and mount them on /mnt/usb with their Label names. It´s also possible to use automounter for network shares, but in that case I prefer to use the GUI menu, because all settings go in neutrino.conf and this is backupped.

Zitat von gorski: „P.S. Any chance of fstab syntax to mount NFS and CIFS shared folders that way, please?“ Why not ? It´s really simple: Put those lines ( of course your right server - IP , sharenames, user and password ) in fstab and it works Quellcode (2 Zeilen)

Well, as I said: I build only from Git, I´m not a developer..... Only Astra19,2 > I´ve only this Position, and there is no reason for me to put more LNB´s in the dish, but I think other Sat - Positions will work too. But sorry : I can´t test it NFS and CIFS share are working stable and good over hours here therefore : And IP-TV and Streaming from i-net: It is for me mainly a HD Receiver, and for this quality is a high speed internet connection necessary, and the streams I have seen there: sorry…

Zitat von gorski: „Neutrino of all flavours needs a substantial improvement in many areas, if we are to have full functionality on the E2 level!“ What do you mean ? The so called "skin changing" ? I´m quite shure that the Neutrino developers this will NEVER build in. The Basic functions > watch TV, Multi recording, playing different media types are build in. The gimmick like web-tv YouTube player also ( honestly : I personally don´t use this > I have for that a PC ) Plugins: well > People must h…

Herzlichen Glückwunsch, alles Gute und Gesundheit für die weiteren Jahre.

Well, I´ve only astra 19.2, therefore I can´t say anything of HB transponders.... I suggest that a right satellites.xml will success, but really don´t know, sorry. In fact : when scanning with e2 on astra, my stb find about 100 services more than Neutrino, but don´t know which / what When I look in the channel lists > I can´t found other services as in Neutrino, and I missed no one. In the past this was also with aaf e2, may be it counts wrong ?? Don´t know, and is absolutely less essential impo…

The installation is the same... The DUAL contains both Neutrino GUI Versions ( NMP and NHD2 ) by using the same base ( kernel, drivers, player2 and so on ). Under plugins -> scripts you will find a point where you can change the system to the other. Each GUI has ist own settings and channel lists

Are you using the right branch ? Zitat: „ git clone -b enigma2 git://gitorious.org/~max10/open-duckbox-sh4/max-tdt.git max-tdt-enigma2 “

Well...Enigma2 > that may be, I never build this....

Well: spark7162_BASE-rev5884_NHD2e-rev1548_flash.zip > the actual build today NHD2e-rev1548 > Neutrino HD2 Revision 1548, more developped as the version you tested in thread title. ( e.g YouTube Player and some plugins are integrated ) NMPe_r5250 > Neutrino MP Revision 5250, just a little bit older. To see the differences > just flash them, and see by yourself. ( Flashing lasts only a few minutes with reboot ) Both are Neutrino from different developer Edit: If you use Firefox or IE you have to …

Hi, gorski.. Yeah, there is an actual NHD2 : spark7162_BASE-rev5884_NHD2e-rev1548_flash.zip Put this in your e.g. Filezilla : nhd2-images.dyndns.org and pick the Image up ( Info : the FTP - Server isn´t always running ) There are also the Dual Versions > they contain Neutrino MP and Neutrino HD2 for flashing to the spark e2 partition. Next days I will put there also a new version. have fun...

Nonsens.... everything works Today I build stm24_211 with Neutrino HD2 for spark7162 > it works, yesterday I build stm24_211 with Neutrino MP > it works too. Don´t know where is your Problem ?

Zitat von jole911: „Spark 7111 and spark 7162 have very poor support in the GIT !“ I don´t think so, all driver changes are gone to git. If you build with TDT Neutrino HD2 > the VFD Icons work on spark7162..... If you build witch max-tdt Neutrino HD2 or Neutrino MP > the VFD Icons work too... You only need the elf´s, but that´s no problem... The "poor" spark7111 has only "poor" LED´s and they work too, I think....

Zitat von gorski: „Not me, m8! I am an IT lay person,“ Everyone has startet someone somewere.... Well, there are some little problems in the last Revision of NHD2, therefore: I don´t like to build for other people if I know that something could went wrong. As mohousch said : it´s a hobby and may not become stress....

Why a so called mount manager ? If the values in the menu are right, or using the telnet command with the right values : it MUST work, otherwise there is something wrong A mount manager like in E2 uses at least always the same functions of busybox or the automounter with autofs. When I mount my win2008 server ( nfs Service ) it works, also when I mount a share from another STB where the nfs Server was activated. What do you mean with progressing ? I only build the Image, the development of NHD2 …

Mounting NFS with the GUI: or in Telnet: mount -t nfs -o rw,tcp,rsize=32768,wsize=32768 192.168.178.20:/share /mnt/nfs ( of course with your own IP and sharename )

Hmm, I´m using NFS mounts with tcp option, in my network udp option doesn´t work well.

Zitat von gorski: „DBoxOldie: any chance of a new version from you, please?“ Well, perhaps at weekend I´ll build an actual version with all changes, but in the moment I don´t know were to upload it.

Zitat von hanswurst09: „Wer auch immer weiß woran es lag?“ Nun Du hattest die Karte ja in einer HD+ Box > da ist mal eben die Verlängerung für 7-8 Wochen geschrieben worden. Ob es richtig geht wirst Du nach Ablauf der Zeit feststellen. oscam-1.20 ist die Grundversion seit Rev. 6090 glaub ich. Damit sollte eigentlich das Log aus sein, aber keine Ahnung wann dieser Parameter eingeführt wurde. Zitat: „ disablelog = 1 “ Am besten: logfile = stdout reinschreiben und die beiden anderen Logeinträge lös…