i Use wicam because C More nordic card fuctions well with without any kind of own confiqs. I will try that

I´ve found 1 problem. Occasionally the tuner looses the quality singals on one satellite and the only thing to get them back is either to turn of the box and turn it on again or turn to a other satellite open a channel there and go back to the satellite where the tuner didn´t get a signal earlier. Now the signal is found. Good image though this is so far the only thing that hopefully will be fixed.

Danke aus Finland! The first Neurtino image that did function with C More (nordic/Finland) orginal card automatically (did open the channels after e few seconds on a channel) without any mixing with the emu configs. I did use Mgcamd together with the new Wicard. The Neutrino image is fast, no lag with the remote control like with the orginal GM 990 reloaded image and much better than the E2 images. Neutrino just gets better!

Includes the posibility to make a Blindscan

This functions fine on a GM 990 reloaded!

Zitat von Thomas66: „Nö mit HDMI geht das 100%“ I have my box connected with hdmi - sorry but for me won´t function, can´t get into the MENU because it just flashes fast by, cant make any kind of changes ´through menu after flashing. Tried to flash it twice. Sparkacus v1.5 then again works fine.

Problems after installing. The NeutrinoHd icon is shown on screen after flashing and when pushing OK you will get the Astra channels list (though no channelpicture with my confiq of lnb:s). But you can´t activate MENU by pushing it on your remote control, the menu - it just flashes by (fast flickering of the menu structure). Totally hopeless to configurate the image because of that (use diseqc 1.1 and 16 lnb). Is there something special you need to with this image so you get the menu button etc …

Sorry can read german but harder to write so I´ll put my question in English. Looks like this upgrade do not have a solution to this problem. Have someone solved the problem with the clock if the electricity is cut off in the box and it boots up after that. The clock starts allways from 00:00, if it should boot all the way to a channel and then shutdown it would find the time and all would be fine. This is a problem if you have recordings waiting on the timer. Do anyone have a solution to this?

Zitat von fundidun: „ Within days, we will make the mod of this firmware if we look that works well :beer:“ Is it possible to do a better translation of the OSD to swedish and finnish? The orginal v. 1.2.09 is anyway awfully and partly translated? Have just bought a reloaded to wifes parents and they don´t really manage good with other languages. I haven´t put in the new FW (1.2.45) yet i their box so don´t know if there have been something done to the translation. They can now try the box and s…