X-Trend ET 6000 Linux HD
Linux HDTV Satellite Receiver
400 MHz MIPS Processor
MPEG-2 / H.264 Hardware Decoding
1x DVB-S2 Tuner
Webbrowsing and HbbTV on TV
Supports Downloadable Plug-ins
STB Board for a special anti-copy technology
Auto Scalable Screen for TV and Skin
1080P@30 HD
Linux open source digital satellite receiver with ethernet port, unlimited channel storage and smart card reader.
It is running on open source firmware, so you can experience and benefit from variety of plug-ins whenever you want. With 3 USB ports, you can enjoy PVR, MP3, JPEG and software upgrade and more.
Multimedia Player
Supports Skin Change
Supports Samba
Supports PIP
Supports 3D OSD
Supports EPG
Supports Automatic and Manual Service Scan
Supports Multiple LNB control (DiSEqC)
Scalable frame buffer
Technical Data
Main System
CPU: BCM7405
Flash Memory: 128 MB
DDR: 512 MB
Front Panel
Display: 3 LED
Smart Card Slot: 2
USB 2.0: 1
Key: 5 Keys
Rear Panel
Power Switch: 1
Sat-IF input/output: 1xF-type socket / 1xF-type socket
Video output (analogue): 3 x RCA socket (YPbPr) / 1 x RCA(CVBS)
Audio output (analogue): 2 x RCA
Audio output (digital): S/PDIF
USB: 2 x USB 2.0
Ethernet: 10/100BaseT
RS 232: 1
Power
Mains voltage: 950 - 250 /50 - 60 V / Hz
Power consumption (Max./typ. operation/stand-by): 35/20/1 W
RF
RF range: 950-2, 150 MHz
Modulation, FEC, de-multiplexer: DVB-S/S2 standard
Video
Video resolution: CCIR 601 (720*576 lines), 576p, 1080i, 1080p @ 30
Video decodung: WMV9, MPEG-2, MPEG-4 compatible
Aspect ratio: 4:3, 16:9, Letter
Input data rate: 2-45 MSymb/s
S/N: > 53 dB
Audio
Audio decoding: WMA9, AC3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
Sampling rate: 32/4.1 / 48 kHz
S/N: > 65 dB
LNB
LNB supply (horiz./vert.): 14/18: Max. 400mA
Control signal: 22 kHz; ToneBurst; DiSEqCTM 1.0/1.1/1.2
General
Dimensions (WxHxD): 260x45x220
Weight (without HDD): App. 2kg
Linux HDTV Satellite Receiver
400 MHz MIPS Processor
MPEG-2 / H.264 Hardware Decoding
1x DVB-S2 Tuner
Webbrowsing and HbbTV on TV
Supports Downloadable Plug-ins
STB Board for a special anti-copy technology
Auto Scalable Screen for TV and Skin
1080P@30 HD
Linux open source digital satellite receiver with ethernet port, unlimited channel storage and smart card reader.
It is running on open source firmware, so you can experience and benefit from variety of plug-ins whenever you want. With 3 USB ports, you can enjoy PVR, MP3, JPEG and software upgrade and more.
Multimedia Player
Supports Skin Change
Supports Samba
Supports PIP
Supports 3D OSD
Supports EPG
Supports Automatic and Manual Service Scan
Supports Multiple LNB control (DiSEqC)
Scalable frame buffer
Technical Data
Main System
CPU: BCM7405
Flash Memory: 128 MB
DDR: 512 MB
Front Panel
Display: 3 LED
Smart Card Slot: 2
USB 2.0: 1
Key: 5 Keys
Rear Panel
Power Switch: 1
Sat-IF input/output: 1xF-type socket / 1xF-type socket
Video output (analogue): 3 x RCA socket (YPbPr) / 1 x RCA(CVBS)
Audio output (analogue): 2 x RCA
Audio output (digital): S/PDIF
USB: 2 x USB 2.0
Ethernet: 10/100BaseT
RS 232: 1
Power
Mains voltage: 950 - 250 /50 - 60 V / Hz
Power consumption (Max./typ. operation/stand-by): 35/20/1 W
RF
RF range: 950-2, 150 MHz
Modulation, FEC, de-multiplexer: DVB-S/S2 standard
Video
Video resolution: CCIR 601 (720*576 lines), 576p, 1080i, 1080p @ 30
Video decodung: WMV9, MPEG-2, MPEG-4 compatible
Aspect ratio: 4:3, 16:9, Letter
Input data rate: 2-45 MSymb/s
S/N: > 53 dB
Audio
Audio decoding: WMA9, AC3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
Sampling rate: 32/4.1 / 48 kHz
S/N: > 65 dB
LNB
LNB supply (horiz./vert.): 14/18: Max. 400mA
Control signal: 22 kHz; ToneBurst; DiSEqCTM 1.0/1.1/1.2
General
Dimensions (WxHxD): 260x45x220
Weight (without HDD): App. 2kg