Das Pearl Display funktioniert natürlich auch am ET9x00. Hier die Installation direkt an und auf der Box.
lcd.jpg
Die libpng12.so.0 per FTP nach /usr/lib/ kopieren.
Die IPK und die tar.gz per FTP nach /tmp/ kopieren.
Jetzt das Display mit der Box verbinden und 3x die Menü Taste drücken (verbinden mit PC).
Nun per Telnet zur Box verbinden (telnet IP-Adresse-der-Box) und folgendes eingeben:
Beispiel:
screenshot.png
lcd.jpg
Die libpng12.so.0 per FTP nach /usr/lib/ kopieren.
Die IPK und die tar.gz per FTP nach /tmp/ kopieren.
Jetzt das Display mit der Box verbinden und 3x die Menü Taste drücken (verbinden mit PC).
Nun per Telnet zur Box verbinden (telnet IP-Adresse-der-Box) und folgendes eingeben:
Das X muss durch eine Zahl ersetzt werden. Das ist entweder 0 oder 1. Einfach probieren welche funktioniert.cd /tmp
opkg install libusb-0.1-4
tar -xzvf dpf-mipsel-patchtool.tar.gz
cd dpf/fw
python hackit.py /dev/sgX
Beispiel:
Neustarten und Spass haben mit bis zu 4 LCDs an der Box.Opening generic SCSI device '/dev/sg0'
Reading flash...
done
Found matching version info
Identifier: pearl
Now patching. There is no 100% guarantee that your device will
work after doing this. You must never unplug the device from USB while
it is being updated.
Are you sure you take all risks and that you want to continue?
Type 'yes' to continue > yes
Copying sector from 0x000000 to 0x1f0000...
Patching sector addr 1f0000 with jmptbl_pearl.ihx
Patching sector addr 180000 with fw_pearl_landscape.ihx
Analyzing module 37...
Patching from version 0 to 2
Now disconnect the DPF from USB.
To activate the 'developer mode':
Press and hold MENU while USB is plugged in.
If successful, you will get the 'USB connect' message and the device
will appear as non-USB storage device
To put the device back into (almost) original state working
as USB storage, press the RESET button.
screenshot.png
Meine Bastelboxen:
Mut@nt HD51 | GB Quad 4K | Mut@nt HD60 | OSMIO4K | HIS 4k Combo+
... Keinen Support per PN ... bitte stellt eure Fragen ins Forum!...
~ Benutzung OpenHDF Image ~ Benutzung der HDF-Toolbox ~ FAQ und Linksammlung ~ Build und Foren Server Spendenaktion ~
... Keinen Support per PN ... bitte stellt eure Fragen ins Forum!...
~ Benutzung OpenHDF Image ~ Benutzung der HDF-Toolbox ~ FAQ und Linksammlung ~ Build und Foren Server Spendenaktion ~