amiko viper 4k combo is dead

iseppo · 16. März 2025, 16:31

good morning, unfortunately I screwed up, I did an update from the panel, the decoder no longer works, from 45 it goes to 100 and no longer shows signs of life. I tried to put 100 firmware back, but it does not recognize any firmware from USB. I'm afraid I have to throw it away? thanks to anyone who can help me

anmado · 16. März 2025, 16:37

Which image is on the box?
You can flash a recovery via USB

v73.hdfreaks.cc/viper4k/

iseppo · 16. März 2025, 16:56

hi anmado image hdfreaks 6.4.
as already written, the decoder does not recognize any image from a USB sticksob sob

anmado · 16. März 2025, 17:10

Try another USB stick.
USB2 FAT32 formatted, not larger than 16Gb

v73.hdfreaks.cc/viper4k/openhd…0250224_recovery_emmc.zip

iseppo · 17. März 2025, 14:30

nothing, I tried with a 4GB USB 2.0, same result, in the menu it only sees the HDF 6.4. in the flash it says there is no valid image, nor the USB_update.bin file. could I delete everything by accident with an FTP program?

cricriat · 17. März 2025, 19:56

Normally not.
All you can do inside of a running image concerns only the data inside the image
and not the structure of the whole flash memory.

Did you try another image like teamblue or PLi ?

Does the amiko viper have an imbedded Rescue system like Gigablue Quad 4K ?
If yes, try it.

iseppo · 17. März 2025, 20:17

yes, I tried all the img, openpli, openatv etc, but the update menu always only recognizes hdf 6.4. I can't operate anything more than this, it doesn't recognize any usb_update.bin file. I don't know gigablu quad 4k, and the decoder doesn't let me navigate anywhere, because when I get to 100 the screen with the hdf logo remains

cricriat · 17. März 2025, 22:01

Maybe the hardware or part of the hardware is defective.
Last idea is a research of possibilities to repair the device.

cricriat · 18. März 2025, 13:09

When the box stays at 100, can you reach the box per ping or can you login per SSH ?

iseppo · 18. März 2025, 14:20

dear cricriat, I'm a noob, the two questions you asked are not my expertise, but thanks anyway, I'll buy another one, that's not the problem, I think repairing it costs as much as buying a new one. thanks again

iseppo · 18. März 2025, 14:24

last question: are openhdf also good for viper 4k v30.........v40????? thanks

cricriat · 18. März 2025, 17:40

Sorry, there is no OpenHDF image for Amiko Viper 4K v30 and upwards.

zeini · 18. März 2025, 17:46

I've moved the topic to the Vioper section. It has nothing to do with forum news.

Teilen