Blindscan beim OCTAGON SF8008 findet Transponder aber keine Sender

    • ... es gibt noch mehr Nutzer, die mit Diseqc 1.1 Probleme haben.

      Das habe ich in einem anderen Forum gelesen:

      Spoiler anzeigen
      http://forum.dxtv.de @dishdx

      Spoiler anzeigen

      Blindscan search:
      1) Motor Usals - OK, works

      2) DiseqC 1.0 switch 4/1 (ports A,B,C,D) - Ok, works

      3) DiseqC 1.0 switch 4/1 (ports A,B,C,D)+USALS - Ok, works

      4) Switch 8/1 with DIP switch setuped as DiseqC 1.1 (Inputs 1-8) - Not OK - Works bad in range 10700-11700 (scans only port 1), Works ok in range 11700-12750 (scans all ports accrodingly selected bird)

      5) Switch 8/1 with DIP switch setuped as DiseqC 1.0 (A,B,C,D) + DiseqC 1.1 (Input 1,2)-Works ok for birds in ports A,B,C,D - input 1. Works bad for ABCD with Input 2 - still scans birds from Input 1!

      6) Switch 8/1 with DIP switch setuped as DiseqC 1.2 (Motor Commands) - Not OK. Scans only position 1.

      7) DiseqC 2.0 switch Spaun 2/1 - Works bad in range 10700-11700 (scans only port 1), Works ok in range 11700-12750 (scans both ports accrodingly selected bird)

      It seems that this Blindscan problem is with DiseqC 1.1!

      Already tuned programs switching:

      1) -7) works ok! It means everything was correct setuped and and the DiseqC problem is only with Blindscan.

      PLEASE: Can somebody who has 8008 and DiseqC 8/1 or 16/1 test the blindscan? It is necessary to check the results from scan, if founded transponders are correct from selected bird. Do the blindscan on other ports than port 1. If you want to do it quickly check only range 10700-11700,because only in this range i noticed blindscan problem.


      Es scheint wirklich nur an Diseqc 1.1 zu liegen ... :(

    • Mein Test: ---> Scannen von Eutelsat 8°W

      Diseqc Einstellungen - zuerst Diseqc 1.0 - Port C , danach Diseqc 1.1 - Port 6

      Der Scan mit dem "alten" Treiber vom 10.01.19

      Spoiler anzeigen

      <?xml version="1.0" encoding="iso-8859-1"?>

      <!--
      File created on Mittwoch, 16 of Januar 2019, 22:17:06
      using sf8008 receiver running Enigma2 image, version 6.4,
      build 5, with the blindscan plugin

      Search parameters:
      Tuner A: Si2166D (DVB-S2)
      Satellite: 8.0W Ku-band Eutelsat 8 West B
      Start frequency: 10700MHz
      Stop frequency: 12750MHz
      Polarization: vertical and horizontal
      Lower symbol rate: 1000
      Upper symbol rate: 45000
      Only save unknown tranponders: no
      Filter out adjacent satellites: no
      Scan duration: 185 seconds
      -->

      <satellites>
      <sat name="8.0W Ku-band Eutelsat 8 West B" flags="0" position="3520">
      <transponder frequency="12533000" symbol_rate="4150000" polarization="1" fec_inner="3" system="1" modulation="4" />
      <transponder frequency="12543000" symbol_rate="2222000" polarization="1" fec_inner="1" system="0" modulation="1" />
      <transponder frequency="12620000" symbol_rate="890000" polarization="1" fec_inner="1" system="0" modulation="1" />
      <transponder frequency="12661000" symbol_rate="5000000" polarization="1" fec_inner="4" system="1" modulation="2" />
      </sat>
      </satellites>



      4 Transponder ... das ist o.k.

      ... und jetzt der Scan mit dem aktuellen Treiber vom 15.01.19

      Spoiler anzeigen

      <?xml version="1.0" encoding="iso-8859-1"?>

      <!--
      File created on Mittwoch, 16 of Januar 2019, 22:23:57
      using sf8008 receiver running Enigma2 image, version 6.4,
      build 5, with the blindscan plugin

      Search parameters:
      Tuner A: Si2166D (DVB-S2)
      Satellite: 8.0W Ku-band Eutelsat 8 West B
      Start frequency: 10700MHz
      Stop frequency: 12750MHz
      Polarization: vertical and horizontal
      Lower symbol rate: 1000
      Upper symbol rate: 45000
      Only save unknown tranponders: no
      Filter out adjacent satellites: no
      Scan duration: 136 seconds
      -->

      <satellites>
      <sat name="8.0W Ku-band Eutelsat 8 West B" flags="0" position="3520">
      <transponder frequency="10719000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10727000" symbol_rate="30000000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10758000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10776000" symbol_rate="27500000" polarization="0" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="10797000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10816000" symbol_rate="27500000" polarization="0" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="10835000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10854000" symbol_rate="29900000" polarization="0" fec_inner="2" system="1" modulation="2" />
      <transponder frequency="10873000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10892000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10911000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="10930000" symbol_rate="30000000" polarization="0" fec_inner="2" system="1" modulation="2" />
      <transponder frequency="10950000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="10992000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11014000" symbol_rate="29900000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11054000" symbol_rate="27500000" polarization="0" fec_inner="2" system="1" modulation="2" />
      <transponder frequency="11076000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="2" />
      <transponder frequency="11117000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11137000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11159000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11179000" symbol_rate="27500000" polarization="0" fec_inner="5" system="0" modulation="1" />
      <transponder frequency="11200000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11220000" symbol_rate="29900000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11241000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11258000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11279000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11297000" symbol_rate="27500000" polarization="0" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11317000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11335000" symbol_rate="27500000" polarization="0" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11356000" symbol_rate="29900000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11373000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11394000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11411000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11433000" symbol_rate="29900000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11449000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11488000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11512000" symbol_rate="27500000" polarization="1" fec_inner="5" system="0" modulation="1" />
      <transponder frequency="11527000" symbol_rate="29700000" polarization="0" fec_inner="2" system="1" modulation="2" />
      <transponder frequency="11542000" symbol_rate="22000000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11566000" symbol_rate="29900000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11585000" symbol_rate="27500000" polarization="1" fec_inner="4" system="1" modulation="2" />
      <transponder frequency="11605000" symbol_rate="27500000" polarization="0" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11623000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="11643000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11662000" symbol_rate="27500000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11681000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11748000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="11767000" symbol_rate="29900000" polarization="1" fec_inner="3" system="1" modulation="2" />

      ........ einige Transponder nusste ich löschen - 10000 Zeichen

      <transponder frequency="12694000" symbol_rate="27500000" polarization="0" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="12715000" symbol_rate="29900000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="12732000" symbol_rate="29900000" polarization="0" fec_inner="0" system="0" modulation="1" />
      </sat>
      </satellites>



      97 Transponder ... ? ? ?

      ... jo, es sieht so aus, wie vor dem letzten Treiberupdate vom Blindscan ..? ?(

    • ... ich benutze immer noch HDF 6.4 ... :)

      Mein Image ist aktuell und heute mit allen neuen Updates. Der Blindscan Treiber im Image ist aber der alte vom 10.01.19.

      ---> siehe Bild - der mit __XX ist der neue Treiber vom 15.01.19, bei dem Diseqc 1.1 nicht funktioniert, per FDP nach Anleitung eingebunden und getestet.

      Bilder

      • BrokenAttachment.txt

        96 Byte, 779×515, 755 mal angesehen

    • kann leider nicht nachvollziehen, habe mit atv und pure2 mehrere tests gemacht mit motor, diseac 1.1 udn auch in kombination mit diseac 1.0
      ist alles OK .
      wenn die octagonblindscan änderung von gestern aus dem github im aktuellen hdf image enthalten ist, dann mal frisch flashen und testen
      ansonsten ist treiber OK, mehrere user bestätigt seit gestern und heute

    • ... heute war das Treiberupdate im HDF Image, aber leider funktioniert der Blindscan nicht korrekt ... ;(

      ... das ist mein Scan auf 8°W mit dem neuen Treiber, 12 Transponder hat er gefunden aber keine Sender - also steuert er den falschen Sat an.

      Spoiler anzeigen

      <?xml version="1.0" encoding="iso-8859-1"?>

      <!--
      File created on Freitag, 18 of Januar 2019, 19:15:08
      using sf8008 receiver running Enigma2 image, version 6.4,
      build 7, with the blindscan plugin

      Search parameters:
      Tuner A: Si2166D (DVB-S2)
      Satellite: 8.0W Ku-band Eutelsat 8 West B
      Start frequency: 10700MHz
      Stop frequency: 12750MHz
      Polarization: vertical and horizontal
      Lower symbol rate: 1000
      Upper symbol rate: 45000
      Only save unknown tranponders: no
      Filter out adjacent satellites: no
      Scan duration: 338 seconds
      -->

      <satellites>
      <sat name="8.0W Ku-band Eutelsat 8 West B" flags="0" position="3520">
      <transponder frequency="10846000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="10888000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="12266000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="1" />
      <transponder frequency="12304000" symbol_rate="27500000" polarization="1" fec_inner="2" system="1" modulation="1" />
      <transponder frequency="12509000" symbol_rate="1101000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="12596000" symbol_rate="27500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="12634000" symbol_rate="3000000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="12660000" symbol_rate="7500000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="12669000" symbol_rate="4240000" polarization="1" fec_inner="4" system="1" modulation="1" />
      <transponder frequency="12673000" symbol_rate="2278000" polarization="1" fec_inner="0" system="0" modulation="1" />
      <transponder frequency="12677000" symbol_rate="4240000" polarization="1" fec_inner="4" system="1" modulation="1" />
      <transponder frequency="12685000" symbol_rate="1100000" polarization="1" fec_inner="4" system="1" modulation="2" />
      </sat>
      </satellites>



      ... mit den Treiber von 10.01.19 - 5 Transponder gefunden und auch die richtigen Sender dazu ... :thumbup:

      Spoiler anzeigen

      <?xml version="1.0" encoding="iso-8859-1"?>

      <!--
      File created on Freitag, 18 of Januar 2019, 19:25:33
      using sf8008 receiver running Enigma2 image, version 6.4,
      build 7, with the blindscan plugin

      Search parameters:
      Tuner A: Si2166D (DVB-S2)
      Satellite: 8.0W Ku-band Eutelsat 8 West B
      Start frequency: 10700MHz
      Stop frequency: 12750MHz
      Polarization: vertical and horizontal
      Lower symbol rate: 1000
      Upper symbol rate: 45000
      Only save unknown tranponders: no
      Filter out adjacent satellites: no
      Scan duration: 173 seconds
      -->

      <satellites>
      <sat name="8.0W Ku-band Eutelsat 8 West B" flags="0" position="3520">
      <transponder frequency="12543000" symbol_rate="2222000" polarization="1" fec_inner="1" system="0" modulation="1" />
      <transponder frequency="12548000" symbol_rate="4667000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="12554000" symbol_rate="4667000" polarization="1" fec_inner="3" system="1" modulation="2" />
      <transponder frequency="12620000" symbol_rate="890000" polarization="1" fec_inner="1" system="0" modulation="1" />
      <transponder frequency="12661000" symbol_rate="5000000" polarization="1" fec_inner="4" system="1" modulation="2" />
      </sat>
      </satellites>



      Der neue Treiber ist nicht o.k. ... :88:

    • ... kann ich nur bestätigen ... :thumbup:

      Beim Blindscan werden auch keine Sender von Stream Transpondern gefunden.

      Ich hab am Wochenende meine Box komplett neu geflasht, um eventuelle selbst gemachte Probleme auszuschließen.
      Aber es hat nichts geholfen.

      8°W benutze ich, weil ich da nur 4, 5, 6 Transponder bekomme und ich da genau sehe, was eingelesen wird.

      Fazit: - bei einer Anlage mit Diseqc 1.0 und danach ein Diseqc 1.1 (10/1 er Schalter) - funktioniert Blindscan definitiv nicht ... :(

      P.S. ... seit dem letzten Treiberupdate zeigt mir der Receiver bei DVB-T keine Signalstärke mehr in db an, auf allen Sendern, ob stark oder schwach, zeigt er max. 79% an ..? ?(

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von sat869 ()

    Flag Counter