Image for Gigablue 800 hd solo

lupetto- · 17. Oktober 2018, 15:12

Hello, in my Gigablue 800 hd solo I have installed an old SIFteam image and it work fine.
I wish change this old SIFteam image with un HDFreaks image.
Could you please, tell me wich version of HDFreaks image work fine with my GIGAblue 800 hd solo?
In this image, are inclused drivers for my USB DTT Tuner?

Thank you in advanced for your help.

zeini · 17. Oktober 2018, 15:35

For your old box best way is, to flash it with Openmultiboot to an USB stick.
And if you also do more than look TV, than install Flash Expander.
Now you can flash last HDF image on your box.

lupetto- · 17. Oktober 2018, 15:49

Thank you zeini for your quick respond.
If I flash it with Openmultiboot to an USB stick, I can`t use my USB DTT Tuner.
I will prefer flash it with an image in his flash.

zeini · 17. Oktober 2018, 17:04

Try it with USB hub.

lupetto- · 17. Oktober 2018, 18:38

Ok, I will try with hub usb.
Just for information, which version of this image I can charge in the flash of my GIGA?

zeini · 17. Oktober 2018, 18:47

Try latest 6.3 image.
If you have installed first install Openmultiboot. Than flash also latest 6.3 image on USB stick with open multiboot. Now you are able to install some plugins.
But with this box you will not be very happy.

lupetto- · 24. Oktober 2018, 08:58

Hello, I have installed latest 6.3 HDFreaks image in the flash, I have installed driver for my USB DTT Tuner and it work fine, but when I try to install some softcam the download start and finish, but in the softcam panel I don`t find any softcam installed :hmm:.

Thank you in advanced for your help.

zeini · 24. Oktober 2018, 10:53

Do you also have start downloaded CAM in HDF Toolbox?

Koivo · 24. Oktober 2018, 10:55

Is there enough space free inside flash memory?

lupetto- · 24. Oktober 2018, 11:30

Yes Zeini, I have downloaded CAM in HDF Toolbox and I had also tried to install softcam manually with ipk in the TMP folder but it doesn't install.

Koivo, this evening when I`ll be at home, I`ll check if there is space enough free space inside the flash memory.
How many mb are needed to install it?

Thank you.

zeini · 24. Oktober 2018, 12:28

You must after download also start the CAM.
This can you do in
menue < HDf Toolbox < Image Softcam Cardreader Manager
In this menue you choose with left/right button in Softcam your CAM and after this you start in line 3 (New start Softcam) with green button (OK).

lupetto- · 25. Oktober 2018, 12:06

Yes I know, but when finish the download of the emu and the decoder asked me if I want restart to complete installation and I click ok,
I go in the menu < HDf Toolbox < Image Softcam Cardreader Manager and when I try choose with left/right button in Softcam there aren`t cam and I don`t understand why, there is only none.
Yesterday I have installed the plugin Openmultiboot and it as been installed in to decoder, when I`ll have time I`ll try to install image in an USB stick.

Always thanks for your help.

Image for Gigablue 800 hd solo

Image for Gigablue 800 hd solo

Image for Gigablue 800 hd solo

Teilen

Ähnliche Themen