Angepinnt How to Guide for Flashing ET-9000 Firmware using USB Pen Drive

    • How to Guide for Flashing ET-9000 Firmware using USB Pen Drive

      Clarke Tech ET-9000 Flashing Image using USB Pen Drive.

      1. Unzip compressed file.
      2. Copy the "ET9000" folder to a USB Pen Drive.
      3. Power off receiver with the mains switch on the rear.
      4. Connect USB Pen Drive.
      5. Power on receiver with the mains switch on the rear.
      6. Press the OK Button on the front panel (behind the front flap).

      Update in progress.

      The receiver will reboot automatically after update.

    Flag Counter