Hab da mal ne Frage: Kann es sein das ein neuer Bootloader, im meinem Fall für die Gigablue, gibt?
Siehe hier: image.openmips.com/4.3/loader/…r_gbquadplus_20151104.zip
Dieser hat den Rescue Mode. Hier der Auszug ausm How to:
Step 1 – CFE (Bootloader)
NOTE: Flashing this CFE will reorganize and resize the flash devices of your Gigablue settopbox (STB).Your STB will no longer boot with your previously installed firmware!
Create a fullbackup of your image.
Create a backup of your settings (if needed).
Copy the full backup of the image and optional backup of the settings to a save location.
Copy ALL files & folders, inside the “Step 1 – CFE (Bootloader)” folder, to a USB stick.
Power OFF your STB (main power switch).
Plug the USB stick into your STB and flip the power switch (ON).Your STB will automatically start flashing the CFE.
Wait untill the blue GigaBlue Logo “GB” on white/grey background is shown on your TV.
Power OFF your STB by flipping the main power switch.
Unplug the USB stick.
Continue with “Step 2 – INITRD (Rescue Mode)”.
Step 2 – INITRD (Rescue Mode)
Delete ALL “Step 1 CFE” files & folders on your USB stick .
Copy ALL files & folders, inside the “Step 2 – INITRD (Rescue Mode)” folder, to a USB stick.
Power OFF your STB (main power switch).
Plug the USB stick into your STB and flip the power switch (ON).Your STB will automatically start flashing the INITRD (Rescue Mode).
Your STB will automatically boot into “Rescue Mode” after flashing of INITRD (Rescue Mode).
Unplug the USB stick.
You can now flash the backup of your image as zip-file using “Rescue Mode” or flash the backup using the a USB stick.
Finally, read the PDF file that is included in the bootloader archive file.
Siehe hier: image.openmips.com/4.3/loader/…r_gbquadplus_20151104.zip
Dieser hat den Rescue Mode. Hier der Auszug ausm How to:
Step 1 – CFE (Bootloader)
NOTE: Flashing this CFE will reorganize and resize the flash devices of your Gigablue settopbox (STB).Your STB will no longer boot with your previously installed firmware!
Create a fullbackup of your image.
Create a backup of your settings (if needed).
Copy the full backup of the image and optional backup of the settings to a save location.
Copy ALL files & folders, inside the “Step 1 – CFE (Bootloader)” folder, to a USB stick.
Power OFF your STB (main power switch).
Plug the USB stick into your STB and flip the power switch (ON).Your STB will automatically start flashing the CFE.
Wait untill the blue GigaBlue Logo “GB” on white/grey background is shown on your TV.
Power OFF your STB by flipping the main power switch.
Unplug the USB stick.
Continue with “Step 2 – INITRD (Rescue Mode)”.
Step 2 – INITRD (Rescue Mode)
Delete ALL “Step 1 CFE” files & folders on your USB stick .
Copy ALL files & folders, inside the “Step 2 – INITRD (Rescue Mode)” folder, to a USB stick.
Power OFF your STB (main power switch).
Plug the USB stick into your STB and flip the power switch (ON).Your STB will automatically start flashing the INITRD (Rescue Mode).
Your STB will automatically boot into “Rescue Mode” after flashing of INITRD (Rescue Mode).
Unplug the USB stick.
You can now flash the backup of your image as zip-file using “Rescue Mode” or flash the backup using the a USB stick.
Finally, read the PDF file that is included in the bootloader archive file.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von MacGyver ()