Spark Triplex 7162 SH4

DarkEvil · 9. Mai 2015, 06:51

Good morning friends,
i have installed in my Sogno Spark Triplex 7162 SH4 Opena.tv Enigma image.
Now i want to go to Spark mode but the receiver with power back off, then power back on with the OK buttom the receiver continue to loading Enigma boot.
I'm not able to change boot to Spark.
In Spark before install Opena.tv image go to Spark and Enigma (before i have installed HDMU image).
I have make a backup from my image in Enigma from menu.
It made this file:
Folder 1 (named "enigma2"): with these files --- e2jffs2.img, imageversion, noforce, uImage2
Folder 2 (named "20150508_2238") into another folder named "enigma2": with the same 4 files above.
But if something happen to receiver in wich way i can restore this backup or another image if I cannot go to change Boot or to force an install nothing?
Receiver go in boot only with Enigma i'm not able to do nothing.
Pla haelp me.
Thnks for all answer.
:88:

lemi · 9. Mai 2015, 08:12

DarkEvil schrieb:

Now i want to go to Spark mode but the receiver with power back off, then power back on with the OK buttom the receiver continue to loading Enigma boot.

Have you followed instructions?
-Power OFF your receiver using the Main Power Switch at the rear panel
-Press and hold the OK button on the front panel, and power on the receiver
-When FORC appears on the display, release the OK button and press and release the CH+ (UP) button. SPAR should appear on the display
-Press and release the OK button on the front panel

DarkEvil · 9. Mai 2015, 08:50

Yes i do,
bur nothing change.
I do power off by using Main Power Switch from rear panel, press ok and hold, and power on .... but enigma continue to load and i can change boot from enigma to spark.
FORC do not appear and so i can press CH+.

Googgi · 9. Mai 2015, 09:25

you have forgot to press "Arrow up" !

please read Frontpanel: Tastenfunktionen

DarkEvil · 9. Mai 2015, 09:30

Thnks for reply Googgi,
but i must press "Arrow up" when appears enigma or Spark for change boot.
But not appear nothing.
I turn on from rear panel with ok press and hold
but nothing appear to change with arrow up.
receiver continue to loading enigma.
and start with it ..............
HELP ME

Googgi · 9. Mai 2015, 09:43

seems that OK-Button is not recognized or dead.

i have no idea what to do in that case.

DarkEvil · 9. Mai 2015, 10:03

So before i tell you that i have installed Opena.tv Imagine 4.2 on my dec.
Now i have try to press al button on the front panel but nothing do
Is like the front panel is not able.
is there any function that disabilities these buttons?

lemi · 9. Mai 2015, 10:16

Let it boot E2 and do update or online flash in ATV menu.Maybe that can fix it FP buttons.

DarkEvil · 9. Mai 2015, 10:26

I have do an upgrade.
The button work because i have try to press two button and work because something happen on display.
Maybe is for upgrade that it doesn't work?
In which way i can re-install Enigma Opena.tv from an USB without turn off receiver from the same image i have installed on?
Where i can do upgrade i do not remember.
Thnks

zeini · 9. Mai 2015, 10:37

You can make an onlineflash.
Do an USB-stick with your choice of firmware on the box and select the image on USB-stick.

DarkEvil · 9. Mai 2015, 11:16

I see that you have Golden Media Triplex. What image you have on?
And SoftCam and Oscam?
thnks

zeini · 9. Mai 2015, 11:26

I have OpenATV 5.0 on box. But with this version Oscam do not work well.
With OpenATV 4.2 from January there was no problem with Oscam and ORF-card.

rantanplan · 9. Mai 2015, 17:44

For change the Boot to Spark...

Try to use M(orly)A(dmin)Tool.

zeini · 10. Mai 2015, 16:22

With image "openatv-5.0-sparktriplex-20150510_usb" also Oscam is working now with ORF-card.

Spark Triplex 7162 SH4

Spark Triplex 7162 SH4

DarkEvil schrieb:

Teilen

Ähnliche Themen