Keinen Zugriff auf die HDD

    • Eine Platte hat eigentlich immer defekte Sektoren, dafür gibt es "Ersatz", also zusätzlichen Platz auf der Platte. Gibt es einen Fehler beim Schreiben, wird einfach dort nicht mehr hingeschrieben (Sektor als defekt markiert) sondern an eine andere Stelle. Kritisch wird es, wenn die Anzahl der Defekte drastisch steigt, dann macht die Platte es meistens nicht mehr lange. Ein defekter Sektor beim Lesen ist noch schlimmer, denn dann fehlt i.d.R. etwas...


      Mach mal

      root@et9x00:~# opkg install smartmontools

      und dann

      root@et9x00:~# smartctl --all /dev/sda1





      und schicke das Ergebnis. Daraus läßt evtl. sehen, ob die Platte bald stirbt.
      [/quote]

      Ich dachte das habe ich schon getan???

    • root@et9x00:~# opkg install smartmontools
      Package smartmontools (5.39.1-r0) installed in root is up to date.
      root@et9x00:~# smartctl --all /dev/sda1
      smartctl 5.39.1 2010-01-28 r3054 [mipsel-oe-linux-gnu] (local build)
      Copyright (C) 2002-10 by Bruce Allen, smartmontools.sourceforge.net

      === START OF INFORMATION SECTION ===
      Device Model: SAMSUNG HD154UI
      Serial Number: S1XWJ90Z812944
      Firmware Version: 1AG01118
      User Capacity: 1,500,301,910,016 bytes
      Device is: Not in smartctl database [for details use: -P showall]
      ATA Version is: 8
      ATA Standard is: ATA-8-ACS revision 3b
      Local Time is: Thu Jan 22 23:23:17 2015 CET
      SMART support is: Available - device has SMART capability.
      SMART support is: Disabled

      SMART Disabled. Use option -s with argument 'on' to enable it.
      root@et9x00:~#

    • Schau mal:

      SMART support is: Available - device has SMART capability.
      SMART support is: Disabled

      Wir schalten S.M.A.R.T- mal ein:

      root@et9x00:~# smartctl -s on /dev/sda1
      smartctl 5.42 2011-10-20 r3458 [mips-linux-3.8.7] (local build)
      Copyright (C) 2002-11 by Bruce Allen, smartmontools.sourceforge.net

      === START OF ENABLE/DISABLE COMMANDS SECTION ===
      SMART Enabled.

      und machen nochmal

      root@et9x00:~# smartctl --all /dev/sda1

      Möglicherweise müssen wir die Platte erstmal etwas beschäftigen:

      root@et9x00:~# dd if=/dev/sda1 of=/dev/null bs=4096

      das einfach mal laufen lassen, das kann ziemlich lange dauern.
      Dabei wird der Inhalt der gesamten Platte gelesen und ins "nichts" geschrieben.

      Dann nochmal

      root@et9x00:~# smartctl --all /dev/sda1

      Kritisch wäre, wenn in folgenden Zeilen am Ende KEINE Null steht.

      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
      5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
      7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
      10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
      196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
      197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
      198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
      199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
      200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
      _________________________________________________________________
      GB ue 4k mit ST3000LM024-2AN1 und Synology über Denon X1700H an LG OLED OLED65C17LB
      AX 4K HD51 mit Synology an OLED55C8LLA
      Anadol Multibox SE an Samsung c
      ET10000 an Pioneer PDP-436RXE
      Unicable mit IG-IDLU-UST110-CUO4O-32P

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von fern-seher ()

    • Hallo fern-seher, hallo Googgi, und @all.

      Danke eure Hilfe.
      Habe in der Zwischenzeit das neue HDf Image 4.2 geflasht und die HDD neu initialisiert,...

      Jetzt läuft wieder alles normal, Aufnehmen Timeshift etc.,...
      Die Ordnerstruktur Sieht auch wieder gut aus, nicht so wie vorher, aber das kann auch am Image liegen,...

      Habe die Test´s wie von fern-seher angegeben durchgeführt und hier das Ergebniss.

      Vielleicht könntet ich euch das ansehen, ob alles in Ordnung ist oder ob ich mir um eine neue HDD gedanken machen muss,..

      DANKE!!!

      Model Family: SAMSUNG SpinPoint F2 EG
      Device Model: SAMSUNG HD154UI
      Serial Number: S1XWJ90Z812944
      LU WWN Device Id: 5 0024e9 2034574a6
      Firmware Version: 1AG01118
      User Capacity: 1,500,301,910,016 bytes [1.50 TB]
      Sector Size: 512 bytes logical/physical
      Device is: In smartctl database [for details use: -P show]
      ATA Version is: 8
      ATA Standard is: ATA-8-ACS revision 3b
      Local Time is: Fri Jan 23 22:54:11 2015 CET
      SMART support is: Available - device has SMART capability.
      SMART support is: Enabled

      === START OF READ SMART DATA SECTION ===
      SMART overall-health self-assessment test result: PASSED

      General SMART Values:
      Offline data collection status: (0x00) Offline data collection activity
      was never started.
      Auto Offline Data Collection: Disabled.
      Self-test execution status: ( 0) The previous self-test routine completed
      without error or no self-test has ever
      been run.
      Total time to complete Offline
      data collection: (18847) seconds.
      Offline data collection
      capabilities: (0x7b) SMART execute Offline immediate.
      Auto Offline data collection on/off supp ort.
      Suspend Offline collection upon new
      command.
      Offline surface scan supported.
      Self-test supported.
      Conveyance Self-test supported.
      Selective Self-test supported.
      SMART capabilities: (0x0003) Saves SMART data before entering
      power-saving mode.
      Supports SMART auto save timer.
      Error logging capability: (0x01) Error logging supported.
      General Purpose Logging supported.
      Short self-test routine
      recommended polling time: ( 2) minutes.
      Extended self-test routine
      recommended polling time: ( 255) minutes.
      Conveyance self-test routine
      recommended polling time: ( 33) minutes.
      SCT capabilities: (0x003f) SCT Status supported.
      SCT Error Recovery Control supported.
      SCT Feature Control supported.
      SCT Data Table supported.

      SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
      3 Spin_Up_Time 0x0007 071 071 011 Pre-fail Always - 9370
      4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 3645
      5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
      7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
      8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
      9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1197
      10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
      11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
      12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1605
      13 Read_Soft_Error_Rate 0x000e 253 253 000 Old_age Always - 0
      183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
      184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
      187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
      188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
      190 Airflow_Temperature_Cel 0x0022 066 066 000 Old_age Always - 34 (Min/Max 26/34)
      194 Temperature_Celsius 0x0022 067 067 000 Old_age Always - 33 (Min/Max 26/40)
      195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 69159
      196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
      197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
      198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
      199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 0
      200 Multi_Zone_Error_Rate 0x000a 253 253 000 Old_age Always - 0
      201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0

    • Muss das Ganze auf zweimal senden. Hier der zweite Teil.

      SMART Error Log Version: 1
      ATA Error Count: 182 (device log contains only the most recent five errors)
      CR = Command Register [HEX]
      FR = Features Register [HEX]
      SC = Sector Count Register [HEX]
      SN = Sector Number Register [HEX]
      CL = Cylinder Low Register [HEX]
      CH = Cylinder High Register [HEX]
      DH = Device/Head Register [HEX]
      DC = Device Command Register [HEX]
      ER = Error register [HEX]
      ST = Status register [HEX]
      Powered_Up_Time is measured from power on, and printed as
      DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
      SS=sec, and sss=millisec. It "wraps" after 49.710 days.

      Error 182 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 02:11:45.590 READ DMA
      c8 00 00 f8 16 02 e0 00 02:11:45.580 READ DMA
      ec 00 00 00 00 00 a0 00 02:11:45.460 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 02:11:45.460 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 02:11:45.450 IDENTIFY DEVICE

      Error 181 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 f8 15 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 14 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 13 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 12 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 11 02 e0 00 02:11:42.510 READ DMA

      Error 180 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:01:02.270 READ DMA
      ec 00 00 00 00 00 a0 00 00:01:02.250 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:01:02.250 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:01:02.230 IDENTIFY DEVICE

      Error 179 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:00:59.170 READ DMA
      ec 00 00 00 00 00 a0 00 00:00:59.150 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:00:59.150 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:00:59.130 IDENTIFY DEVICE

      Error 178 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:00:56.370 READ DMA
      ec 00 00 00 00 00 a0 00 00:00:56.350 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:00:56.350 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:00:56.330 IDENTIFY DEVICE

      SMART Self-test log structure revision number 1
      No self-tests have been logged. [To run self-tests, use: smartctl -t]

      SMART Selective self-test log data structure revision number 1
      SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
      1 0 0 Not_testing
      2 0 0 Not_testing
      3 0 0 Not_testing
      4 0 0 Not_testing
      5 0 0 Not_testing
      Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.

      root@et9x00:~#

      Vielen Dank für euer Hilfe!

    • Das sieht so schlecht nicht aus.

      Man könnte mal noch folgendes probieren:

      smartctl -t short /dev/sda1

      und ca. 5 min warten, dann

      smartctl --all /dev/sda1

      und

      smartctl -t long /dev/sda1

      und ca. 1h warten, dann

      smartctl --all /dev/sda1

      Das macht je einen Selbsttest der Platte (Daten bleiben erhalten).




      Das Ergebnis sollte in etwa so aussehen:

      ...
      SMART Self-test log structure revision number 1
      Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
      # 1 Short offline Completed without error 00% 20681 -


      _________________________________________________________________
      GB ue 4k mit ST3000LM024-2AN1 und Synology über Denon X1700H an LG OLED OLED65C17LB
      AX 4K HD51 mit Synology an OLED55C8LLA
      Anadol Multibox SE an Samsung c
      ET10000 an Pioneer PDP-436RXE
      Unicable mit IG-IDLU-UST110-CUO4O-32P

    • SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x000f 099 099 051 Pre-fail Always - 6
      3 Spin_Up_Time 0x0007 071 071 011 Pre-fail Always - 9560
      4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 3693
      5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
      7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
      8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
      9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1216
      10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
      11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
      12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1614
      13 Read_Soft_Error_Rate 0x000e 099 099 000 Old_age Always - 6
      183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
      184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
      187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 6
      188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
      190 Airflow_Temperature_Cel 0x0022 064 064 000 Old_age Always - 36 (Min/Max 16/36)
      194 Temperature_Celsius 0x0022 066 066 000 Old_age Always - 34 (Min/Max 16/47)
      195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 3098142
      196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
      197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
      198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
      199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
      200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
      201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0

      SMART Error Log Version: 1
      ATA Error Count: 185 (device log contains only the most recent five errors)
      CR = Command Register [HEX]
      FR = Features Register [HEX]
      SC = Sector Count Register [HEX]
      SN = Sector Number Register [HEX]
      CL = Cylinder Low Register [HEX]
      CH = Cylinder High Register [HEX]
      DH = Device/Head Register [HEX]
      DC = Device Command Register [HEX]
      ER = Error register [HEX]
      ST = Status register [HEX]
      Powered_Up_Time is measured from power on, and printed as
      DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
      SS=sec, and sss=millisec. It "wraps" after 49.710 days.

      Error 185 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:17:53.910 READ DMA
      ec 00 00 00 00 00 a0 00 00:17:53.850 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:17:53.850 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:17:53.830 IDENTIFY DEVICE

      Error 184 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:17:51.310 READ DMA
      c8 00 00 20 17 02 e0 00 00:17:51.300 READ DMA
      ec 00 00 00 00 00 a0 00 00:17:51.180 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:17:51.180 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:17:51.160 IDENTIFY DEVICE

      Error 183 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 20 16 02 e0 00 00:17:48.760 READ DMA
      c8 00 00 20 15 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 14 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 13 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 12 02 e0 00 00:17:48.750 READ DMA

      Error 182 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 02:11:45.590 READ DMA
      c8 00 00 f8 16 02 e0 00 02:11:45.580 READ DMA
      ec 00 00 00 00 00 a0 00 02:11:45.460 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 02:11:45.460 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 02:11:45.450 IDENTIFY DEVICE

      Error 181 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 f8 15 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 14 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 13 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 12 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 11 02 e0 00 02:11:42.510 READ DMA

      SMART Self-test log structure revision number 1
      No self-tests have been logged. [To run self-tests, use: smartctl -t]

      SMART Selective self-test log data structure revision number 1
      SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
      1 0 0 Not_testing
      2 0 0 Not_testing
      3 0 0 Not_testing
      4 0 0 Not_testing
      5 0 0 Not_testing
      Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.

      root@et9x00:~# smartctl -t long /dev/sda1
      smartctl 5.42 2011-10-20 r3458 [mips-linux-3.8.7] (local build)
      Copyright (C) 2002-11 by Bruce Allen, smartmontools.sourceforge.net

      === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
      Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
      Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
      Testing has begun.
      Please wait 255 minutes for test to complete.
      Test will complete after Wed Jan 28 00:28:11 2015

      Use smartctl -X to abort test.
      root@et9x00:~#

      Kann das sein das der Test wirklich über 4HR. dauert????????????????

    • ja, das dauert.
      _________________________________________________________________
      GB ue 4k mit ST3000LM024-2AN1 und Synology über Denon X1700H an LG OLED OLED65C17LB
      AX 4K HD51 mit Synology an OLED55C8LLA
      Anadol Multibox SE an Samsung c
      ET10000 an Pioneer PDP-436RXE
      Unicable mit IG-IDLU-UST110-CUO4O-32P

    • SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 6
      3 Spin_Up_Time 0x0007 072 072 011 Pre-fail Always - 9290
      4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 3695
      5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
      7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
      8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 13586
      9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1218
      10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
      11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
      12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1615
      13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 6
      183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
      184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
      187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 6
      188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
      190 Airflow_Temperature_Cel 0x0022 065 063 000 Old_age Always - 35 (Min/Max 35/35)
      194 Temperature_Celsius 0x0022 064 050 000 Old_age Always - 36 (Min/Max 35/36)
      195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 4785
      196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
      197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
      198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
      199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
      200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
      201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0

      SMART Error Log Version: 1
      ATA Error Count: 185 (device log contains only the most recent five errors)
      CR = Command Register [HEX]
      FR = Features Register [HEX]
      SC = Sector Count Register [HEX]
      SN = Sector Number Register [HEX]
      CL = Cylinder Low Register [HEX]
      CH = Cylinder High Register [HEX]
      DH = Device/Head Register [HEX]
      DC = Device Command Register [HEX]
      ER = Error register [HEX]
      ST = Status register [HEX]
      Powered_Up_Time is measured from power on, and printed as
      DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
      SS=sec, and sss=millisec. It "wraps" after 49.710 days.

      Error 185 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:17:53.910 READ DMA
      ec 00 00 00 00 00 a0 00 00:17:53.850 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:17:53.850 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:17:53.830 IDENTIFY DEVICE

      Error 184 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:17:51.310 READ DMA
      c8 00 00 20 17 02 e0 00 00:17:51.300 READ DMA
      ec 00 00 00 00 00 a0 00 00:17:51.180 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:17:51.180 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:17:51.160 IDENTIFY DEVICE

      Error 183 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 20 16 02 e0 00 00:17:48.760 READ DMA
      c8 00 00 20 15 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 14 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 13 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 12 02 e0 00 00:17:48.750 READ DMA

      Error 182 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 02:11:45.590 READ DMA
      c8 00 00 f8 16 02 e0 00 02:11:45.580 READ DMA
      ec 00 00 00 00 00 a0 00 02:11:45.460 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 02:11:45.460 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 02:11:45.450 IDENTIFY DEVICE

      Error 181 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 f8 15 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 14 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 13 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 12 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 11 02 e0 00 02:11:42.510 READ DMA

      SMART Self-test log structure revision number 1
      Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
      # 1 Extended offline Aborted by host 50% 1217 -

      SMART Selective self-test log data structure revision number 1
      SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
      1 0 0 Not_testing
      2 0 0 Not_testing
      3 0 0 Not_testing
      4 0 0 Not_testing
      5 0 0 Not_testing
      Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.

      root@et9x00:~# smartctl --all /dev/sda1


      Habe das GaNZE nochmal gestartet, werde alles morgen nochmals posten,...
      Der Test war wahrscheinlich noch nicht fertig,.. siehe (# 1 Extended offline Aborted by host 50% 1217 -)!!!!

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von kisi ()

    • SMART Attributes Data Structure revision number: 16
      Vendor Specific SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 6
      3 Spin_Up_Time 0x0007 072 072 011 Pre-fail Always - 9290
      4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 3696
      5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
      7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
      8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 12261
      9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1225
      10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
      11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
      12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 1615
      13 Read_Soft_Error_Rate 0x000e 100 099 000 Old_age Always - 6
      183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
      184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
      187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 6
      188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
      190 Airflow_Temperature_Cel 0x0022 065 063 000 Old_age Always - 35 (Min/Max 35/35)
      194 Temperature_Celsius 0x0022 057 050 000 Old_age Always - 43 (Min/Max 35/47)
      195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 4785
      196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
      197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
      198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
      199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
      200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
      201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0

      SMART Error Log Version: 1
      ATA Error Count: 185 (device log contains only the most recent five errors)

      Powered_Up_Time is measured from power on, and printed as
      DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
      SS=sec, and sss=millisec. It "wraps" after 49.710 days.

      Error 185 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:17:53.910 READ DMA
      ec 00 00 00 00 00 a0 00 00:17:53.850 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:17:53.850 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:17:53.830 IDENTIFY DEVICE

      Error 184 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 00:17:51.310 READ DMA
      c8 00 00 20 17 02 e0 00 00:17:51.300 READ DMA
      ec 00 00 00 00 00 a0 00 00:17:51.180 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 00:17:51.180 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 00:17:51.160 IDENTIFY DEVICE

      Error 183 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 20 16 02 e0 00 00:17:48.760 READ DMA
      c8 00 00 20 15 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 14 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 13 02 e0 00 00:17:48.750 READ DMA
      c8 00 00 20 12 02 e0 00 00:17:48.750 READ DMA

      Error 182 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 08 20 16 02 e0 00 02:11:45.590 READ DMA
      c8 00 00 f8 16 02 e0 00 02:11:45.580 READ DMA
      ec 00 00 00 00 00 a0 00 02:11:45.460 IDENTIFY DEVICE
      ef 03 47 00 00 00 a0 00 02:11:45.460 SET FEATURES [Set transfer mode]
      ec 00 00 00 00 00 a0 00 02:11:45.450 IDENTIFY DEVICE

      Error 181 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle .

      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 20 16 02 e0 Error: UNC at LBA = 0x00021620 = 136736

      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
      -- -- -- -- -- -- -- -- ---------------- --------------------
      c8 00 00 f8 15 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 14 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 13 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 12 02 e0 00 02:11:42.520 READ DMA
      c8 00 00 f8 11 02 e0 00 02:11:42.510 READ DMA

      SMART Self-test log structure revision number 1
      Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error
      # 1 Extended offline Completed without error 00% 1223 -
      # 2 Extended offline Aborted by host 50% 1217 -


      Das Ganze dauert mir zu lange,....
      Das sind die Werte die der Test ausgespuckt hat,....
      mfg

    • kisi schrieb:

      Das Ganze dauert mir zu lange,....



      Wenn die Box läuft (mit Timeshift, Aufnamhe, etc...) dauert es erheblich länger. Im Standby geht es bedeutend schneller.

      OK, Du hast 50% getested und 6 "harte" Lesefehler gefunden.
      Ein kompletter Test wäre aussagekräftiger.

      Das ist kein gutes Zeichen ... das kann noch eine ganze Weile gut gehen oder auch schon morgen vorbei sein.
      Wenn die Box beim Lesen auf so einen Fehler stößt, könnte sie hängen oder auch einen Crash hinlegen, so wie Du es schon gesehen hast.

      Man könnte nochmal versuchen, die Platte komplett platt tzu machen, komplett neu beschreiben und sehen, ob die Fehler mehr werden - als letzten Versuch sozusagen.
      Zum Beispiel mit

      dd if=/dev/zero of=/dev/sda1

      Damit wird der gesamte Inhalt überschrieben, das dauert einige Stunden und die Box sollte dabei im Standby sein. Danach wieder mit ext4 initialisieren.

      Oder eine neue besorgen und jetzt noch retten, was zu retten ist.

      Die Entscheidung liegt bei Dir.




      Alternativ könnte man das File System auf "bad blocks" scannen lassen, das ist zwar nicht so wirkungsvoll wie das neu beschreiben, aber immerhin:

      - Box soll im Standby sein
      - "umount /media/hdd" ausführen
      - "opkg install e2fsprogs" ausführen
      - "e2fsck -cy /dev/sda1" ausführen (das dauert wieder, dabei sieht man höchstens mal eine Fehlermeldung)
      - danach mit "mount /dev/sda1 /media/hdd" wieder neu mounten oder einfach Box neu starten
      _________________________________________________________________
      GB ue 4k mit ST3000LM024-2AN1 und Synology über Denon X1700H an LG OLED OLED65C17LB
      AX 4K HD51 mit Synology an OLED55C8LLA
      Anadol Multibox SE an Samsung c
      ET10000 an Pioneer PDP-436RXE
      Unicable mit IG-IDLU-UST110-CUO4O-32P

      Dieser Beitrag wurde bereits 7 mal editiert, zuletzt von fern-seher ()

    • fern-seher, wieso

      dd if=/dev/random of=/dev/sda1

      Ich habe sowas zwar schon länger nicht mehr gemacht, aber ich denke das ist extreeeeeeeem langsam (weil normalerweise /dev/random wirklich langsam ist). Ich schätze ernstahft, dass 1 Jahrnicht reicht ... (Oder haben moderne enigma-Boxen das in HW implementiert und müssen nicht mehr auf Entropie warten? Oder halt sonst viel schneller implementiert als klassische Unix-Systeme?)

      Ohne dass ich das von dir vorgeschlagene Vorgehen bekräftigen möchte, der Befehl

      dd if=/dev/zero of=/dev/sda1

      sollte in diesem Kontext praktisch das gleiche Bewirken, und so schnell sein für diesen Zweck, wie möglich. Alle Daten gehen auch hier verloren. Und das dauert auch noch einige Stunden (vielleicht eine 2-stellige Anzahl Stunden).

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von buers ()

    • Stimmt. Für die Box ist /dev/random nicht das richtige.

      Zuletzt habe ich das gemacht, um auf einem Disk-Array mit zero detect ein wenig Traffic zu erzeugen, dort hätte /dev/zero eben nichts gebracht. Der Server hatte aber mit seinen 240 Kernen auch etwas mehr Power ... ;)


      Das Ganze läuft sowieso nur darauf hinaus, dass die Platte hinüber ist bzw. bald sein wird.
      _________________________________________________________________
      GB ue 4k mit ST3000LM024-2AN1 und Synology über Denon X1700H an LG OLED OLED65C17LB
      AX 4K HD51 mit Synology an OLED55C8LLA
      Anadol Multibox SE an Samsung c
      ET10000 an Pioneer PDP-436RXE
      Unicable mit IG-IDLU-UST110-CUO4O-32P

    Flag Counter