Very brief (not in german, sorry)

My QuadPlus keeps crashing every 1 to 4-5 hours, and i have a kernel entry in the logfile about the crash, but unable to reboot, only thing working is power button.


CPU 0 Unable to handle kernel paging request at virtual address 00000244, epc == e11aa7ac, ra == e11aaf88
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008700 e11aa7ac 00000001
$ 4 : 00000000 00000078 00000000 00000001
$ 8 : 00000000 00000000 00000400 81a09e80
$12 : 00000000 00000000 01367000 00000001
$16 : e20a157c 00000078 e20c0c58 e1e976e0
$20 : 00000050 00000140 e11f454c e11f0000
$24 : 00000000 e122cae0
$28 : cf086000 cf087da0 e1230000 e11aaf88
Hi : 000038c7
Lo : bd534b80
epc : e11aa7ac NEXUS_Message_ReadComplete_impl+0x0/0x13c [dvb]
Tainted: G O
ra : e11aaf88 NEXUS_Message_ReadComplete+0x30/0x50 [dvb]
Status: 10008703 KERNEL EXL IE
Cause : 00800008
BadVA : 00000244
PrId : 00025a11 (Brcm4380)
Modules linked in: ipv6 dvb(O)
Process nx_sched_high_a (pid: 116, threadinfo=cf086000, task=cf0e4588, tls=00000000)
Stack : cf087de4 e20a157c 00000076 e20c0c58 00000000 00000078 00000140 e110e7cc
80054d68 00100100 cdcd2e84 8004c0f0 e20a157c 00000000 8d574000 00000000
00000078 00000000 cdcd2e80 cf0a1d00 e1f50000 cf132600 e11f108c e11f10c8
cf087e28 e11f3168 cfc28f00 00000002 81a09e80 00000010 cf087e40 cf088070
cf089a18 0349ceef 03b4095e cdcd2f00 cdcd2f00 00000000 00000001 00000000
...
Call Trace:
[<e11aa7ac>] NEXUS_Message_ReadComplete_impl+0x0/0x13c [dvb]
[<e11aaf88>] NEXUS_Message_ReadComplete+0x30/0x50 [dvb]
[<e110e7cc>] dev_dmx_msg_cb_dataReady+0x200/0x254 [dvb]
[<e11f3168>] NEXUS_P_Scheduler_Step+0x57c/0x918 [dvb]
[<e11f3540>] NEXUS_P_Scheduler_Thread+0x3c/0x60 [dvb]
[<e11f44fc>] NEXUS_P_ThreadStart+0x3c/0x8c [dvb]
[<80044d2c>] kthread+0x90/0x98
[<80005fb0>] kernel_thread_helper+0x10/0x18


Code: afa20018 0846a9b2 8fa20018
27bdffe8 afb00010 afbf0014 00808021 1040001c
---[ end trace 5ed09b995f384d85 ]---

Do i really need to a Paging file, or is it something else?
Latest full OpenHDF image installed from 20-07-2014.

Any help appreciated

well, i got no IPv6 activated router or pc here, so i believe its still a box issue.
Anyways if its just disconnecting, why would the whole box , give the same kernel crash when it happens? Thats not normal.
It should survive a network disconnect, if the router really do some stuff like automated restart , but thats not every 4-5 hours.

Thanks anyways for the hint, i did not notice the error code.

This problem has been resolved with the latest online update for my box, it is stable and very good again.

Seems there was some bug in the DVB driver, which were updated online as well.

Thanks!