Sorglospaket Spark7111 PKT-Hyperion v3.1 mod by mui4tler
Hallo,
habe das Image installiert. So weit läuft alles gut.
Das Problem ist, dass ich nur Lesezugrif auf die angeschlossene FP
Toshiba1Tb habe. Die Attribute lassen sich nicht ändern. Sind immer 500.
Benutze Ubuntu 12.04 und Filezilla.
Wenn ich einen USB Stick 16Gb anschließe, werden die Attribute automatisch auf 755 gesetzt.
In anderem Tread hat mir ,,Googgi'' vorgeschlagen:
,,Dann aktivier den RW-Zugriff unter samba.
Da ist wohl readonly = yes eingestellt.
geht normalerweise in der Datei /etc/samba/smb.conf
in folgendem Abschnitt:
[hdd]
comment = .::Festplatte::. /hdd
path = /hdd
read only = no
public = yes
guest ok = yes
[media]
comment = .::Media Mounts::. /media
path = /media
read only = no
public = yes
guest ok = yes
Ist da nichts zu machen?
Dann muss ich leider auf anderes Image umsteigen.
MfG
Hallo,
habe das Image installiert. So weit läuft alles gut.
Das Problem ist, dass ich nur Lesezugrif auf die angeschlossene FP
Toshiba1Tb habe. Die Attribute lassen sich nicht ändern. Sind immer 500.
Benutze Ubuntu 12.04 und Filezilla.
Wenn ich einen USB Stick 16Gb anschließe, werden die Attribute automatisch auf 755 gesetzt.
In anderem Tread hat mir ,,Googgi'' vorgeschlagen:
,,Dann aktivier den RW-Zugriff unter samba.
Da ist wohl readonly = yes eingestellt.
geht normalerweise in der Datei /etc/samba/smb.conf
in folgendem Abschnitt:
So steht es auch bei mir in smb.conf:
[Harddisk]
comment = The Harddisk
path = /media/hdd
read only = no
public = yes
guest ok = yes
[hdd]
comment = .::Festplatte::. /hdd
path = /hdd
read only = no
public = yes
guest ok = yes
[media]
comment = .::Media Mounts::. /media
path = /media
read only = no
public = yes
guest ok = yes
Ist da nichts zu machen?
Dann muss ich leider auf anderes Image umsteigen.
MfG
VU+ UNO 4K SE im WZ OpenHDF
AX 4k HD51 im SZ
AX 4k HD51 im SZ