Mates:
Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon latest release of OpenAR-P Enigma2 Image, OpenAR-P_OE2.0_211_alien_epl3-git-20-01-14_v2013-03-31-540-gb01d455. All credit goes to the OpenAR-P team for their hard work.
Cams:
1. CCcam
2. Mgcamd
3. Oscam (Oscam ymod v18t48 )
4. Camd3
Plugins:
1. MediaPortal 5.0.6
2. CoolTV Guide 6.4.0
3. EPG Translator
4. Wikipedia
5. IPTV List Updater
6. HDD Manager
7. MyTubePlayer
Extra Skins Installed:
1. dTV-Reloaded HD (mod engineerkhan15)
2. dreamTV-HD (mod engineerkhan15)
3. DreamMM-HD (mod engineerkhan15)
4. nBlack51
Picons:
About 3000 picons of Hotbird (13E), Asiasat 3S (105.5E), DishTV SD (95E) and Intelsat 20 (68.5E) included. (size=100x60)
How to install:
1. Only use Spark plugin "e2_upgrade" to install this backup successfully.
2. Extract it and copy "back_of_e2" folder on a USB Flash Disk.
3. Connect USB Flash Disk to your Spark receiver while the receiver is running in Spark.
4. Go to Menu>Plugin and start e2_upgrade" plugin.
5. Press OK button on remote, scroll down to "back_of_e2" folder and press RED button to select it.
6. Press RED button again to start installing this backup. After some time installation will be completed.
How to Boot into Enigma2:
1. To boot into your new Enigma2 image, power off your receiver from back side power switch.
2. Now, while keeping pressed the front panel OK button on your receiver, power on again your receiver using back side power switch, after few seconds, you will see "Forc" on your receiver display.
3. Leave OK button now and press channel down button on your receiver's front panel, you will see "En16" on your receiver display.
4. Now press OK button and receiver will boot into Enigma2 image.
FTP and Telnet Login Details:
User: root
Password: root
Screenshots:
dreamTV-HD Skin:
dTV Reloaded-HD Skin:
DreamMM-HD Skin:
Plugins-1:
Plugins-2:
EPG Translator:
Wikipedia:
Picons:
If you like this post, press thanks button.
Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon latest release of OpenAR-P Enigma2 Image, OpenAR-P_OE2.0_211_alien_epl3-git-20-01-14_v2013-03-31-540-gb01d455. All credit goes to the OpenAR-P team for their hard work.
Cams:
1. CCcam
2. Mgcamd
3. Oscam (Oscam ymod v18t48 )
4. Camd3
Plugins:
1. MediaPortal 5.0.6
2. CoolTV Guide 6.4.0
3. EPG Translator
4. Wikipedia
5. IPTV List Updater
6. HDD Manager
7. MyTubePlayer
Extra Skins Installed:
1. dTV-Reloaded HD (mod engineerkhan15)
2. dreamTV-HD (mod engineerkhan15)
3. DreamMM-HD (mod engineerkhan15)
4. nBlack51
Picons:
About 3000 picons of Hotbird (13E), Asiasat 3S (105.5E), DishTV SD (95E) and Intelsat 20 (68.5E) included. (size=100x60)
How to install:
1. Only use Spark plugin "e2_upgrade" to install this backup successfully.
2. Extract it and copy "back_of_e2" folder on a USB Flash Disk.
3. Connect USB Flash Disk to your Spark receiver while the receiver is running in Spark.
4. Go to Menu>Plugin and start e2_upgrade" plugin.
5. Press OK button on remote, scroll down to "back_of_e2" folder and press RED button to select it.
6. Press RED button again to start installing this backup. After some time installation will be completed.
How to Boot into Enigma2:
1. To boot into your new Enigma2 image, power off your receiver from back side power switch.
2. Now, while keeping pressed the front panel OK button on your receiver, power on again your receiver using back side power switch, after few seconds, you will see "Forc" on your receiver display.
3. Leave OK button now and press channel down button on your receiver's front panel, you will see "En16" on your receiver display.
4. Now press OK button and receiver will boot into Enigma2 image.
FTP and Telnet Login Details:
User: root
Password: root
Screenshots:
dreamTV-HD Skin:
dTV Reloaded-HD Skin:
DreamMM-HD Skin:
Plugins-1:
Plugins-2:
EPG Translator:
Wikipedia:
Picons:
If you like this post, press thanks button.
