Festplatte wird nicht erkannt..

  • Festplatte wird nicht erkannt..

    Ich bekomme meine Interne ssd nicht angezeigt..

    Einmal war sie kurz da und nun nicht mehr... Booten dauert auch etwas länger als sonst...
    Sie wird noch nichtmal im Gerätemanager angezeigt...

    Hab im gigablue forum diese Antwort bekommen : Bei welchem Image genau tritt das auf? Der Fehler ist doch längst beseitigt.
    Ist da vllt etwas bei den letzten updates ein fehler passiert?
    Hier mal ein auszug aus dmesg

    Quellcode

    1. ata1: COMRESET failed (errno=-16)
    2. ata1: limiting SATA link speed to 3.0 Gbps
    3. ata1: hard resetting link
    4. ata1: SATA link down (SStatus 0 SControl 320)
    5. ata1.00: link online but device misclassified
    6. ata1: link online but 1 devices misclassified, device detection might fail
    7. ata1: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen t4
    8. ata1: irq_stat 0x00400040, connection status changed
    9. ata1: SError: { PHYRdyChg CommWake DevExch }
    10. ata1: hard resetting link
    11. ata1: link is slow to respond, please be patient (ready=0)
    12. ata1: COMRESET failed (errno=-16)
    13. ata1: hard resetting link
    14. ata1: link is slow to respond, please be patient (ready=0)
    15. ata1: COMRESET failed (errno=-16)
    16. ata1: hard resetting link
    17. ata1: link is slow to respond, please be patient (ready=0)
    18. ata1: COMRESET failed (errno=-16)
    19. ata1: limiting SATA link speed to 3.0 Gbps
    20. ata1: hard resetting link
    21. ata1: SATA link down (SStatus 0 SControl 320)
    22. ata1: EH complete
    23. ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
    24. ata1: irq_stat 0x00000040, connection status changed
    25. ata1: SError: { DevExch }
    26. ata1: hard resetting link
    27. ata1: link is slow to respond, please be patient (ready=0)
    28. ata1: COMRESET failed (errno=-16)
    29. ata1: hard resetting link
    30. ata1: link is slow to respond, please be patient (ready=0)
    31. ata1: COMRESET failed (errno=-16)
    32. ata1: hard resetting link
    33. ata1: link is slow to respond, please be patient (ready=0)
    34. ata1: COMRESET failed (errno=-16)
    35. ata1: limiting SATA link speed to 3.0 Gbps
    36. ata1: hard resetting link
    37. ata1: SATA link down (SStatus 0 SControl 320)
    38. ata1: EH complete
    39. ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
    40. ata1: irq_stat 0x00000040, connection status changed
    41. ata1: SError: { DevExch }
    42. ata1: hard resetting link
    43. ata1: link is slow to respond, please be patient (ready=0)
    Alles anzeigen

    Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Schmello ()

  • Das ist Blödsinn was dort steht. Aber flashe ruhig das openmips wenn es dir dann besser geht.
    Im HDF sind die aktuellsten Treiber drin. Deine Fehlermeldung sagt auch was anders.
    MAch lieber das was undertakter dort geschrieben hat. Das hilft wahrscheinlich eher also der Blödsinn von Papi2000.

    Übrigends hast du eine Antwort bekommen.
    Meine Bastelboxen: Mut@nt HD51 | GB Quad 4K | Mut@nt HD60 | OSMIO4K | HIS 4k Combo+

    ... Keinen Support per PN ... bitte stellt eure Fragen ins Forum!...

    ~ Benutzung OpenHDF Image ~ Benutzung der HDF-Toolbox ~ FAQ und Linksammlung ~ Build und Foren Server Spendenaktion ~

Flag Counter