BPanther Neutrino-MP for Spark 7111

nandy007 · 29. Januar 2014, 13:56

HI
I'm very happy that I've finally succeeded to install this new image!Now I've deleted the image from the USB stick and copyed the two cams.I've mounted the USB stick with those CAMS on it but nothing.I don't see a good change actually I miss those channels I could see with the previous image

and when I go in Extras I can't set the settings as you said.I have only WLAN and it's not set yet.Is that a problem?Thanx in advance

nandy007 · 29. Januar 2014, 14:22

Is there a problem if I copy again that image on USB along with those CAMS...?

DboxOldie · 29. Januar 2014, 14:29

Sorry :
W-lan isn´t provided in BPanther Images. It isn´t activated in Linux kernel and no drivers available.
There are better and stable solutions like an ethernet to w-lan converter, and for that no driver needed.

nandy007 · 29. Januar 2014, 15:38

Hi again!
How can I activate CAMS?Could you give me a path please?Nothing special until now

nandy007 · 29. Januar 2014, 15:50

What you mean by moving / var to image?I should copy this in Enigma folder?

DboxOldie · 29. Januar 2014, 16:14

What has Enigma to do with Neutrino ??????
Or do you mean the /enigma2 folder on stick for flashing ? > there only of course belong the uImage and e2jffs2.img files
Have a look at post #3, there is a sreenshot of the menu for starting emus, read the short info and all is clear.

Thomas66 · 30. Januar 2014, 05:47

snoopy the dog schrieb:

Amiko Alien 1 mit alter Fernbedienung funktioniert bei diesem Image nicht! Was tun??

Das nehmen: Download-neutrino-MP-26.1.2014

mihaip · 1. Februar 2014, 08:46

New version ( 31.01.2014 ) of Neutrino HD2 BPanther !!!
- solved RC issues
To upgrade first is recommended to save all settings ... to do this
you have two options :
1) insert a "ext2/ext3" formatted stick , reboot to ensure mounting
and perform "save all settings" then upgrade Neutrino partition with
the new image ... after restart ... reinsert backup stick and request
"restore all settings"
2) insert a FAT32 formatted stick ... save all settings into /hdd ... copy
using FTP client ... /hdd/backup.tar.gz to PC ... upgrade Neutrino with
the new image ... after restart ... using FTP client copy from PC to
Neutrino /tmp the backup file ... and "restore all settings" from /tmp

Thomas66 · 1. Februar 2014, 13:10

Das ist nicht neutrino hd 2, auch kein neutrino2 wie es im rumänischen Forum behauptet wird, sondern Neutrino MP

DboxOldie · 1. Februar 2014, 13:20

That´s right what Thomas66 says:
The base is Neutrino MP which is ported to a lot of other sh4 stb´s in max-git.

mohousch · 1. Februar 2014, 14:18

neutrinoMP
neutrinoHD2

for more information

Thomas66 · 1. Februar 2014, 16:23

ich hab mal name oben geändert

mihaip · 1. Februar 2014, 18:07

Sorry ! my mistake ! Neutrino MP BPanther !!!
On BPanther's forum is called MultiTunner as well as version 2.0 !!

mihaip · 4. März 2014, 06:10

New image from BPanther ....

mihaip · 4. März 2014, 17:35

I remind the backup/restore procedure :
- before upgrade make a full settings backup
- upgrade Neutrino ... e.g. using plugin e2upgrade from Spark
- reboot and make first settings then using FTP move the
backup archive from PC to Neutrino in /tmp
- restore the settings from /tmp

xbrother · 13. März 2014, 18:03

mihaip schrieb:

I remind the backup/restore procedure :
- before upgrade make a full settings backup
- upgrade Neutrino ... e.g. using plugin e2upgrade from Spark
- reboot and make first settings then using FTP move the
backup archive from PC to Neutrino in /tmp
- restore the settings from /tmp

I'm having a problem with my Pingulux STB as follows : i install the image, works great , zaps extremely quick but after 20-30 min freezes and if i zap the channel will not change ... if i restart the tuner i can zap the channels but i get the error " Error channel not available" on all channels. My best guess has to be the driver of the tuner... or something goes wrong with my emu: oscam?!
Can someone help me ?

Thank you!

DboxOldie · 13. März 2014, 19:21

Is this behavier on free channels too ? Or only on crypted channels ?

xbrother · 14. März 2014, 07:39

DboxOldie schrieb:

Is this behavier on free channels too ? Or only on crypted channels ?

Hello,
Only some times. once i left it over night on a free channel and did not freeze, mostly the free ones tend to work longer than crypted ,but in the end will freeze. so thats why i am confused and dont know for sure if its the emu or the tuner driver or altogether,
Clearly the tuner fails but without emu works longer... so i am really confused.

P.S : if i modify the channel list with the computer and then upload to the STB will freeze in like 1-2 min free&crypted
Thank you

nandy007 · 14. März 2014, 11:16

Hi.How can I connect to my receiver.I installed Sat Channel List Editor but I dont know how to use it.How can I get my IP adress?Thanx in advance!

DboxOldie · 14. März 2014, 11:37

@xbrother:
The BP Neutrino MP Images are working fine and perfectly on my Kathrein STB´s.
And for Spark7162 I´ve to build own ones, because I must use another remote control therefore I´ve to Change the drivers source and no other ready Image will work.
For the channel lists I use DreamSet 2.34, but for the Triplex DreamSet 2.40 also works fine, because it can handle mixed dvb-s / dvb-t channel lists.
It´s important to use the right settings in that tool.
Try to test a Free-TV channel without loading / activating oscam, because it works too if it´s loaded.
@nandy007:
You will find the box-ip in > settings > Network if you are using dhcp.

BPanther Neutrino-MP for Spark 7111

BPanther install succeeded

Neutrino BPanther

CAM

Image

snoopy the dog schrieb:

New BPanher Neutrino image

Reminder !

mihaip schrieb:

DboxOldie schrieb:

Connecting to my receiver

Teilen