Kabel Deutschland G09 Karte HD Sender funktionieren nicht in der Gigablue QUAD

  • Kabel Deutschland G09 Karte HD Sender funktionieren nicht in der Gigablue QUAD

    Hallo, ich habe seit gestern eine Gigablue Quad. Leider funktionieren die HD Sender von KD nicht im wenn ich Die G09 Karte in den internen Kartenleser stecke. Wenn ich die Karte mit CI+ Modul einschiebe bekomme ich zwar einige HD Sender, aber leider bleiben die Sender der RTL Gruppe dunkel. Über welchen Slot sollte ich es am besten versuchen?

    Ich habe es auch schon mit oscam versucht, aber es tut sich leider nichts.

    Hier mal meine Configs:

    oscam.server
    [hide][reader]
    label = KD
    enable = 1
    protocol = internal
    device = /dev/sci0
    caid = 09C7
    detect = cd
    mhz = 357
    cardmhz = 357
    group = 2
    emmcache = 1,3,2
    lb_weight = 100
    ns7e11 = 13
    boxid = 123668[/hide]

    oscam.conf
    [hide][global]
    logfile = /home/root/logs/oscam.log
    unlockparental = 1
    nice = -1
    waitforcards_extra_delay = 15000
    dropdups = 1
    lb_mode = 1
    lb_retrylimit = 1600
    lb_auto_betatunnel = 0

    [dvbapi]
    enabled = 1
    au = 1
    user = dvbapiau
    boxtype = dreambox

    [webif]
    httpport = 88
    httphelplang = de
    httprefresh = 30
    httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.0-10.255.255.255
    hideclient_to = 15[/hide]

    oscam.user
    [hide][account]
    user = local
    group = 1,2
    au = 1[/hide]

    meine oscam logfile
    [hide]2014/01/09 11:52:05 1850 77D65000 s >> OSCam << cardserver started version ymodv18-t50, build #0 (mips-tuxbox-linux)
    2014/01/09 11:52:05 1850 77D65000 s version=ymodv18-t50, build #0, system=mips-tuxbox-linux, nice=-1
    2014/01/09 11:52:05 1850 77D65000 s client max. idle=120 sec, debug level=0
    2014/01/09 11:52:05 1850 77D65000 s max. logsize=unlimited
    2014/01/09 11:52:05 1850 77D65000 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
    2014/01/09 11:52:05 1850 77D65000 s services reloaded: 0 services freed, 42 services loaded
    2014/01/09 11:52:05 1850 77D65000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2014/01/09 11:52:05 1850 77D65000 s signal handling initialized (type=sysv)
    2014/01/09 11:52:05 1850 77D65000 s 290 service-id's loaded
    2014/01/09 11:52:05 1850 77D65000 s 39 tier-id's loaded
    2014/01/09 11:52:05 1850 77D65000 s 966 provid's loaded
    2014/01/09 11:52:05 1850 77D65000 s 0 lengths for caid guessing loaded
    2014/01/09 11:52:05 1850 77D65000 s can't open file "/etc/tuxbox/config/oscam_emu/oscam.keys" softcam keys not loaded
    2014/01/09 11:52:05 1850 77D65000 s monitor: disabled
    2014/01/09 11:52:05 1850 77D65000 s camd33: disabled
    2014/01/09 11:52:05 1850 77D65000 s camd35: disabled
    2014/01/09 11:52:05 1850 77D65000 s cs378x: disabled
    2014/01/09 11:52:05 1850 77D65000 s newcamd: disabled
    2014/01/09 11:52:05 1850 77D65000 s cccam: disabled
    2014/01/09 11:52:05 1850 77D65000 s radegast: disabled
    2014/01/09 11:52:05 1850 77D65000 s http thread started
    2014/01/09 11:52:05 1850 77D65000 s creating thread for device /dev/sci0
    2014/01/09 11:52:05 1850 77D65000 s loadbalancer: can't read from file /tmp/.oscam/stat
    2014/01/09 11:52:05 1850 77D65000 s waiting for local card init
    2014/01/09 11:52:05 1850 77A1E4B0 r reader thread started (thread=77A1E4B0, label=kd, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
    2014/01/09 11:52:05 1850 77A9E4B0 h HTTP Server listening on port 88
    2014/01/09 11:52:05 1850 77A1E4B0 r kd card detected
    2014/01/09 11:52:20 1850 77A1E4B0 r ERROR in IO_Serial_Read errno=0
    2014/01/09 11:52:20 1850 77A1E4B0 r ERROR: 0 characters found in ATR
    2014/01/09 11:52:20 1850 77A1E4B0 r Error activating card.
    2014/01/09 11:52:36 1850 77A1E4B0 r ERROR in IO_Serial_Read errno=0
    2014/01/09 11:52:36 1850 77A1E4B0 r ERROR: 0 characters found in ATR
    2014/01/09 11:52:36 1850 77A1E4B0 r Error activating card.
    2014/01/09 11:52:51 1850 77A1E4B0 r ERROR in IO_Serial_Read errno=0
    2014/01/09 11:52:51 1850 77A1E4B0 r ERROR: 0 characters found in ATR
    2014/01/09 11:52:51 1850 77A1E4B0 r Error activating card.
    2014/01/09 11:52:52 1850 77A1E4B0 r card initializing error
    2014/01/09 11:52:52 1850 77D65000 s init for all local cards done
    2014/01/09 11:52:52 1850 77D65000 s anti cascading disabled
    2014/01/09 11:52:52 1850 7799E4B0 c plain dvbapi-client granted (anonymous, au=off)
    2014/01/09 11:52:52 1850 7799E4B0 c dvbapi: 3 entries read from oscam.dvbapi
    2014/01/09 11:52:55 1850 7799E4B0 c dvbapi: [ADD PID 0] CAID: 09C7 ECM_PID: 1AC1 PROVID: 000000
    2014/01/09 11:52:55 1850 7799E4B0 c dvbapi: [ADD PID 1] CAID: 1861 ECM_PID: 1ABD PROVID: 000000
    2014/01/09 11:52:55 1850 7799E4B0 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 1AC0 PROVID: 000000
    2014/01/09 11:52:55 1850 7799E4B0 c dvbapi: new program number: C35F (09C7:C35F unknown)
    2014/01/09 11:52:55 1850 7799E4B0 c anonymous (09C7&000000/C35F/1AC1/0000/5E:22B3/00-00): not found (0 ms) by kd
    2014/01/09 11:52:55 1850 7799E4B0 c anonymous (1861&000000/C35F/1ABD/0000/89:36BA/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:52:55 1850 7799E4B0 c dvbapi: try pids again #1
    2014/01/09 11:52:55 1850 7799E4B0 c anonymous (1834&000000/C35F/1AC0/0000/89:7980/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:52:55 1850 7799E4B0 c anonymous (09C7&000000/C35F/1AC1/0000/5E:22B3/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:52:55 1850 7799E4B0 c anonymous (1861&000000/C35F/1ABD/0000/89:36BA/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:52:56 1850 7799E4B0 c dvbapi: try pids again #2
    2014/01/09 11:52:56 1850 7799E4B0 c anonymous (1834&000000/C35F/1AC0/0000/89:7980/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:52:56 1850 7799E4B0 c anonymous (09C7&000000/C35F/1AC1/0000/5E:22B3/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:52:56 1850 7799E4B0 c anonymous (1861&000000/C35F/1ABD/0000/89:36BA/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:52:56 1850 7799E4B0 c dvbapi: try pids again #3
    2014/01/09 11:52:56 1850 7799E4B0 c dvbapi: can't decode channel
    2014/01/09 11:52:56 1850 7799E4B0 c anonymous (1834&000000/C35F/1AC0/0000/89:7980/00-00): rejected group (0 ms) (no matching reader)
    2014/01/09 11:58:13 1850 77D65000 s exit with signal 15
    2014/01/09 11:58:13 1850 77D65000 s cardserver down[/hide]

    Hier noch ein logfile von Doscam...hat leider auch nicht funktioniert
    [hide]2014/01/09 11:59:31 0 s >> DOSCam << started, V0.19 (mipsel-unknown-linux-gnu)
    2014/01/09 11:59:31 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 353
    2014/01/09 11:59:31 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
    2014/01/09 11:59:31 0 s signal handling initialized
    2014/01/09 11:59:31 0 s monitor: initialized (fd=4, port=988)
    2014/01/09 11:59:31 0 s cccam (used for zeroconf): initialized (fd=5, port=21526)
    2014/01/09 11:59:31 0 s Slot1 [internal] creating thread for device /dev/sci0
    2014/01/09 11:59:31 0 s EMU [constcw] creating thread for device /etc/tuxbox/config/doscam/SoftCam.Key
    2014/01/09 11:59:31 0 s loadbalancer: can't read from file /tmp/.doscam/stat
    2014/01/09 11:59:31 0 s waiting for local card init
    2014/01/09 11:59:31 52F900 p EMU init failed - Keyfile not found!
    2014/01/09 11:59:31 52DD70 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
    2014/01/09 11:59:31 52C1E0 h webif: decompressed 49928 bytes back into 143560 bytes
    2014/01/09 11:59:31 52C1E0 h HTTP Server running. ip=0.0.0.0 port=88
    2014/01/09 11:59:32 52DD70 r Slot1 [internal] card detected
    2014/01/09 12:00:22 52DD70 r Slot1 [internal] Error activating card.
    2014/01/09 12:01:56 0 --- Skipped 1 duplicated log lines ---
    2014/01/09 12:01:56 0 s init for all local cards done
    2014/01/09 12:01:56 0 s anti cascading disabled
    2014/01/09 12:01:56 76B01B70 c plain dvbapi-client granted (DVBApi, au=on (2 reader))
    2014/01/09 12:01:56 76B01B70 c Detected /dev/dvb/adapter0/demux0 Api: 0
    2014/01/09 12:01:57 52C1E0 h HTTP Server stopped
    2014/01/09 12:01:57 0 s loadbalancer: statistic saved 0 records to /tmp/.doscam/stat in 0ms
    2014/01/09 12:01:57 0 s killing client DVBApi
    2014/01/09 12:01:57 0 s Slot1 [internal] Killing reader
    2014/01/09 12:01:57 0 s EMU [constcw] Killing reader
    2014/01/09 12:01:57 0 s userdb 2 accounts freed
    2014/01/09 12:01:57 0 s readerdb 3 readers freed
    2014/01/09 12:01:57 0 s DOSCam down[/hide]

    Ich hoffe jemand kann mir dabei helfen. Bin schon am verzweifeln...

    Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von eddie2001a ()

  • Habe es mit Doscam auch schon versucht.

    Hier der Inhalt der doscam.cfg
    [hide][global]
    logfile = /home/root/logs/oscam.log
    waitforcards_extra_delay = 3000
    dropdups = 1
    lb_retrylimit = 1600

    [cccam]
    nodeid = 4BE0369D10BA14FC

    [dvbapi]

    [monitor]
    nocrypt = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
    hideclient_to = 15

    [webif]
    httpport = 88
    httphelplang = de
    httprefresh = 30
    httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.0-10.255.255.255
    hideclient_to = 15[/hide]

  • naja so wie ich das sehe hast du keine Karte oder sie wird nicht gelesen

    Chip muß glaub ich nach oben zeigen

    Für den DOScam Betrieb, würde ich erstmal bis es reibungslos läuft, alles aus der doscam.cfg entfernen
    Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
    Konfuzius

  • Okay, habe die Karte umgedreht. War immer falsch herum. Leider gehen die HD Sender immer noch nicht.

    Hier die aktualisierte Log
    [hide]2014/01/09 12:37:08 0 s >> DOSCam << started, V0.19 (mipsel-unknown-linux-gnu)
    2014/01/09 12:37:08 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 2404
    2014/01/09 12:37:08 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
    2014/01/09 12:37:08 0 s signal handling initialized
    2014/01/09 12:37:08 0 s monitor: initialized (fd=5, port=988)
    2014/01/09 12:37:08 0 s cccam (used for zeroconf): initialized (fd=6, port=21526)
    2014/01/09 12:37:08 0 s Slot1 [internal] creating thread for device /dev/sci0
    2014/01/09 12:37:08 0 s EMU [constcw] creating thread for device /etc/tuxbox/config/doscam/SoftCam.Key
    2014/01/09 12:37:08 0 s loadbalancer: can't read from file /tmp/.doscam/stat
    2014/01/09 12:37:08 0 s waiting for local card init
    2014/01/09 12:37:08 52DDA0 p EMU init failed - Keyfile not found!
    2014/01/09 12:37:08 52C210 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
    2014/01/09 12:37:08 52FF30 h webif: decompressed 49928 bytes back into 143560 bytes
    2014/01/09 12:37:08 52FF30 h HTTP Server running. ip=0.0.0.0 port=88
    2014/01/09 12:37:08 52C210 r Slot1 [internal] card detected
    2014/01/09 12:37:59 52C210 r Slot1 [internal] Error activating card.
    2014/01/09 12:39:40 0 --- Skipped 2 duplicated log lines ---
    2014/01/09 12:39:40 52C210 r Slot1 [internal] card initializing error
    2014/01/09 12:39:44 0 s init for all local cards done
    2014/01/09 12:39:44 0 s anti cascading disabled
    2014/01/09 12:39:44 5356F0 c plain dvbapi-client granted (DVBApi, au=on (2 reader))
    2014/01/09 12:39:44 5356F0 c Detected /dev/dvb/adapter0/demux0 Api: 0
    2014/01/09 12:39:49 5356F0 c [ADD PID 0] CAID: 09C7 ECM_PID: 1AC1 PROVID: 000000
    2014/01/09 12:39:49 5356F0 c [ADD PID 1] CAID: 1861 ECM_PID: 1ABD PROVID: 000000
    2014/01/09 12:39:49 5356F0 c [ADD PID 2] CAID: 1834 ECM_PID: 1AC0 PROVID: 000000
    2014/01/09 12:39:49 5356F0 c Found 3 ECMpids and 4 STREAMpids in PMT
    2014/01/09 12:39:49 5356F0 c New program number: C35F (09C7:C35F unknown) [pmt_list_management 3]
    2014/01/09 12:40:23 52FF30 h HTTP Server stopped
    2014/01/09 12:40:23 0 s loadbalancer: statistic saved 0 records to /tmp/.doscam/stat in 0ms
    2014/01/09 12:40:23 0 s killing client DVBApi
    2014/01/09 12:40:23 0 s Slot1 [internal] Killing reader
    2014/01/09 12:40:23 0 s EMU [constcw] Killing reader
    2014/01/09 12:40:23 0 s userdb 2 accounts freed
    2014/01/09 12:40:23 0 s readerdb 3 readers freed
    2014/01/09 12:40:23 0 s DOSCam down
    [/hide]

    Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von eddie2001a ()

  • Karte wird nicht erkannt

    Vorgehensweise
    Die doscam.cfg blank machen, das nichts mehr drin steht.
    alle anderen Files enfernen die noch in dem Config Ordner liegen.
    Dann nur Doscam starten kein Cardsever oder sonst was.
    Jetzt die Karte in alles Slots der Box rein stecken, mal Chip oben, mal Chip unten, und gucken ob ein Bild kommt.

    PS: deine Logs sind nicht sehr aussagekräftig
    Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
    Konfuzius

  • wäre schön wenn du jetzt hier noch schreibst wie du es zum laufen gebracht hast, mit der DOSCam oder OSCam.ymod, dann noch Chip oben oder unten, oder aber auch mal die Configs hier posten wenn OSCam Betrieb.

    Das hilft dann auch anderen Membern hier im Forum
    Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
    Konfuzius

Flag Counter