#########################################################
# #
# Team Ducktales' Enigma2 image for the TF7700HDPVR #
# #
# Release 0.4.0 #
# #
#########################################################
The provided image is based on the Linux operating system and includes
the Enigma2 PVR application. Please read this document carefully before
installing the image.
New features and bugfixes (since 0.3.2)
---------------------------------------
+ Feature: o added an extended version of TopfieldVFD plugin to
adjust VFD settings and to control additional icons
o added displaying clock and Ethernet activity
o added displaying MP3 tags
+ Feature: added handling for "auto" afterEvent in recording timer
(deepstandby after recording if woken up by a timer)
+ Feature: recognition and playback of files with the extension .rec
+ Change: reduced the guard time for shutdown prior to timer events from 360
to 60 seconds (i. e. the box can be shut down up to 60 seconds
before next recording)
+ Change: reduced the wakeup guard time from 300 to 60 seconds (i.e. the
box wakes up 60 seconds before next recording)
+ Change: moved mounting /dev/sda3 from rcS to fstab
+ Fix: improved the CAM detection
+ Fix: fixed the U-Boot handling of FAT32, now high-capacity USB sticks
should be read properly
+ Fix: fixed the issue with the MP3 playlist
+ Fix: re-added the fix to display the Dolby icon on VFD correctly
+ Fix: changed mount options to allow HDD idle without intermittent wakeups
+ Fix: removed duplicate entries in /etc/fstab
+ Fix: fixed AVI audio track selection
+ Fix: fixed playback of AVI files with 23.976fps/24.976fps/29.976fps
+ Fix: re-added the workaround to fix the issue with stopping playback
while it is paused
Unsupported features and known problems
---------------------------------------
- The only supported tuner type is DVB-S2 CX24116/CX24118.
- Volume control ****
Due to an incompatibility with many menus the **** right/left cannot be used
for volume control. Therefore, the volume can be controlled via the frame
control **** |< and >|.
- Temporary loss of sync if timeshift is unpaused within 6-7 seconds after
its activation.
Workaround: do not unpause timeshift in the first 8 seconds.
- "Fast forward" does not work properly at speeds higher than 8x.
"Jump forward" can be used instead (see playback keys).
- Rewind does not work properly. Sometimes enigma2 freezes when rewinding.
"Jump back" can be used instead (see playback keys).
- Some Samsung LCD TVs might have problems with the default resolution
576i.
- With "AC3 downmix on" there is no sound on optical when AC3 stream is
selected. With "AC3 downmix off" the system migt freeze when zapping to
channels with AC3.
- There are problems with switching between different satelleites via Diseqc.
It takes several seconds to tune to a channel on another satellite.
- Simultaneous output to HDMI and Scart is not supported.
- Sporadic hangers when zapping during an active HDTV recording
- Sporadic problems with old frames in a live stream (flashbacks)
- Some USB sticks are not recognized so that the Enigma2 installation
does not work. Reformatting the stick with FAT32 might help.
IMPORTANT:
When reporting problems please provide console logs documenting the system
behaviour.
DISCLAIMER
----------
The software is provided 'as is' without warranty of any kind.
Please consider that you may lose manufacturer's warranty when installing
this image.
This is an alpha image. That is some functions may not be available or be
buggy (causing crashes/freezes or loss of data).
The installation of the Enigma2 image formats (ext2) the internal harddisk
unless installation on a USB HDD is selected.
ALL FILES ON THE HARDDRIVE WILL BE LOST. When reverting the installation
on the internal HDD to the original Topfield firmware all Enigma2 files
will be lost too.
Installation instructions
-------------------------
You will need either a USB stick or a USB harddrive with FAT32 filesystem.
- Copy the files Enigma_Installer.tfd, uImage, rootfs.tar.gz and
Engima_Installer.ini to the USB device. Please read the instructions
in Engima_Installer.ini on how to modify the installation process.
- Attach the drive to the USB slot.
- Open the Topfield firmware update menu and select the image file
Enigma_Installer.tfd on the USB drive.
- Start the firmware update from USB. This part is very quick.
Restart the receiver when the display shows the blinking END
- After about 6-7 minutes the installation should be finished.
DO NOT REMOVE THE USB DEVICE UNTIL the INSTALLATION HAS FINISHED or
THE INSTALLER REQUESTS TO DETACH THE USB DEVICE.
- When installing to a USB HDD (option usbhdd in Enigma_Installer.tfd)
the installer will ask you to detach the initial USB device and to
attach a USB HDD to install to.
During the installation the VFD shows the current installation step and
error messages (if any):
"9 USB STCK" mounting USB stick
"STCK DETACH" waiting for USB device to be detached (USB HDD installation)
"HDD ATTACH" waiting for USB HDD to be attached (USB HDD installation)
"8 HDD PART" partitioning HDD
"7 HDD FMT" formatting HDD (root fs)
"6 HDD FMT" formatting HDD (data fs)
"5 HDD SWAP" creating swap
"4 ROOT FS" installing root file system
"3 LOADER" flashing U-Boot settings
"2 KERNEL" flashing kernel
"1 FSCK" checking file system
"0 REBOOT" rebooting within 2 seconds
When installing to a USB HDD the contents of the internal HDD remain unchanged.
IMPORTANT: When using the option "keepsettings" in Engima_Installer.ini the
newer settings (incl. keymap.xml updates) will not be installed.
It is recommended to attach a cable to the serial port and log the output in a
terminal program (e.g. TeraTerm, Putty) during the installation and the first
start. Serial port settings: 115200, 8, N, 1.
The USB filesystem should be writable to prevent infinite installation loop.
(The file uImage is renamed to avoid the infinite loop.)
The first start usually takes approximately 3 minutes due to creation of
device nodes.
To uninstall Enigma2, copy your favorite Topfield firmware on your stick and
rename it to "topfield.tfd" (don't forget to rename uImage_ if necessary). The
installer will flash the firmware and reboot the Toppy. There have been reports
that the PVR appears to be dead for about 5 minutes until the picture comes on
the TV screen. So please be patient. Enigma2 can also be removed by flashing a
regular Topfield firmware image using standard tools like TFD-Down or VegaPack
via the serial interface.
First start
-----------
On the first start the Enigma2 interactively configures the video output to be
used. The following options are available:
- Component
- HDMI
- Scart
- HDMI-PC
Each connection type is switched on for 30 seconds. The VFD displays the
connection type which is currently active. You can either wait until the
connection type you want is displayed and your TV shows a picture or you
can select the connection type with Up and Down buttons on the remote control.
Confirm the desired connection type with the Ok button. After that you can
proceed with the configuration supported by the configuration wizard.
The image contains a default channel table. If you want to replace it you can
perform a channel scan later.
Network configuration
---------------------
The U-Boot settings contain the following configuration by default:
MAC address 00:3e:9e:11:22:33
IP address 192.168.178.100
That is after booting the image you can login via telnet if your computer is in
the same subnet.
These values are set up by the U-Boot. You can change the values
in Enigma2 menu "Settings/System/Network.../Adapter settings".
Playback ****
-------------
Play - shows the file list
Pause - pauses playback or activates timeshift
Stop - stops playback or timeshift
Record - opens the record dialog for starting stopping recording
Yellow - pause/unpause playback
Green - continue playback
Red - jump to the beginning
Blue - jump to the next bookmark
1/3 jump 15 seconds backwards/forwards (configurable in the settings menu)
4/6 jump 60 seconds backwards/forwards (configurable in the settings menu)
7/9 jump 5 minutes backwards/forwards (configurable in the settings menu)
Full *** map can be found in the file /usr/local/share/enigma2/keymap.xml.
Team Ducktales
Quelle: AAF Board
Download in der Database
# #
# Team Ducktales' Enigma2 image for the TF7700HDPVR #
# #
# Release 0.4.0 #
# #
#########################################################
The provided image is based on the Linux operating system and includes
the Enigma2 PVR application. Please read this document carefully before
installing the image.
New features and bugfixes (since 0.3.2)
---------------------------------------
+ Feature: o added an extended version of TopfieldVFD plugin to
adjust VFD settings and to control additional icons
o added displaying clock and Ethernet activity
o added displaying MP3 tags
+ Feature: added handling for "auto" afterEvent in recording timer
(deepstandby after recording if woken up by a timer)
+ Feature: recognition and playback of files with the extension .rec
+ Change: reduced the guard time for shutdown prior to timer events from 360
to 60 seconds (i. e. the box can be shut down up to 60 seconds
before next recording)
+ Change: reduced the wakeup guard time from 300 to 60 seconds (i.e. the
box wakes up 60 seconds before next recording)
+ Change: moved mounting /dev/sda3 from rcS to fstab
+ Fix: improved the CAM detection
+ Fix: fixed the U-Boot handling of FAT32, now high-capacity USB sticks
should be read properly
+ Fix: fixed the issue with the MP3 playlist
+ Fix: re-added the fix to display the Dolby icon on VFD correctly
+ Fix: changed mount options to allow HDD idle without intermittent wakeups
+ Fix: removed duplicate entries in /etc/fstab
+ Fix: fixed AVI audio track selection
+ Fix: fixed playback of AVI files with 23.976fps/24.976fps/29.976fps
+ Fix: re-added the workaround to fix the issue with stopping playback
while it is paused
Unsupported features and known problems
---------------------------------------
- The only supported tuner type is DVB-S2 CX24116/CX24118.
- Volume control ****
Due to an incompatibility with many menus the **** right/left cannot be used
for volume control. Therefore, the volume can be controlled via the frame
control **** |< and >|.
- Temporary loss of sync if timeshift is unpaused within 6-7 seconds after
its activation.
Workaround: do not unpause timeshift in the first 8 seconds.
- "Fast forward" does not work properly at speeds higher than 8x.
"Jump forward" can be used instead (see playback keys).
- Rewind does not work properly. Sometimes enigma2 freezes when rewinding.
"Jump back" can be used instead (see playback keys).
- Some Samsung LCD TVs might have problems with the default resolution
576i.
- With "AC3 downmix on" there is no sound on optical when AC3 stream is
selected. With "AC3 downmix off" the system migt freeze when zapping to
channels with AC3.
- There are problems with switching between different satelleites via Diseqc.
It takes several seconds to tune to a channel on another satellite.
- Simultaneous output to HDMI and Scart is not supported.
- Sporadic hangers when zapping during an active HDTV recording
- Sporadic problems with old frames in a live stream (flashbacks)
- Some USB sticks are not recognized so that the Enigma2 installation
does not work. Reformatting the stick with FAT32 might help.
IMPORTANT:
When reporting problems please provide console logs documenting the system
behaviour.
DISCLAIMER
----------
The software is provided 'as is' without warranty of any kind.
Please consider that you may lose manufacturer's warranty when installing
this image.
This is an alpha image. That is some functions may not be available or be
buggy (causing crashes/freezes or loss of data).
The installation of the Enigma2 image formats (ext2) the internal harddisk
unless installation on a USB HDD is selected.
ALL FILES ON THE HARDDRIVE WILL BE LOST. When reverting the installation
on the internal HDD to the original Topfield firmware all Enigma2 files
will be lost too.
Installation instructions
-------------------------
You will need either a USB stick or a USB harddrive with FAT32 filesystem.
- Copy the files Enigma_Installer.tfd, uImage, rootfs.tar.gz and
Engima_Installer.ini to the USB device. Please read the instructions
in Engima_Installer.ini on how to modify the installation process.
- Attach the drive to the USB slot.
- Open the Topfield firmware update menu and select the image file
Enigma_Installer.tfd on the USB drive.
- Start the firmware update from USB. This part is very quick.
Restart the receiver when the display shows the blinking END
- After about 6-7 minutes the installation should be finished.
DO NOT REMOVE THE USB DEVICE UNTIL the INSTALLATION HAS FINISHED or
THE INSTALLER REQUESTS TO DETACH THE USB DEVICE.
- When installing to a USB HDD (option usbhdd in Enigma_Installer.tfd)
the installer will ask you to detach the initial USB device and to
attach a USB HDD to install to.
During the installation the VFD shows the current installation step and
error messages (if any):
"9 USB STCK" mounting USB stick
"STCK DETACH" waiting for USB device to be detached (USB HDD installation)
"HDD ATTACH" waiting for USB HDD to be attached (USB HDD installation)
"8 HDD PART" partitioning HDD
"7 HDD FMT" formatting HDD (root fs)
"6 HDD FMT" formatting HDD (data fs)
"5 HDD SWAP" creating swap
"4 ROOT FS" installing root file system
"3 LOADER" flashing U-Boot settings
"2 KERNEL" flashing kernel
"1 FSCK" checking file system
"0 REBOOT" rebooting within 2 seconds
When installing to a USB HDD the contents of the internal HDD remain unchanged.
IMPORTANT: When using the option "keepsettings" in Engima_Installer.ini the
newer settings (incl. keymap.xml updates) will not be installed.
It is recommended to attach a cable to the serial port and log the output in a
terminal program (e.g. TeraTerm, Putty) during the installation and the first
start. Serial port settings: 115200, 8, N, 1.
The USB filesystem should be writable to prevent infinite installation loop.
(The file uImage is renamed to avoid the infinite loop.)
The first start usually takes approximately 3 minutes due to creation of
device nodes.
To uninstall Enigma2, copy your favorite Topfield firmware on your stick and
rename it to "topfield.tfd" (don't forget to rename uImage_ if necessary). The
installer will flash the firmware and reboot the Toppy. There have been reports
that the PVR appears to be dead for about 5 minutes until the picture comes on
the TV screen. So please be patient. Enigma2 can also be removed by flashing a
regular Topfield firmware image using standard tools like TFD-Down or VegaPack
via the serial interface.
First start
-----------
On the first start the Enigma2 interactively configures the video output to be
used. The following options are available:
- Component
- HDMI
- Scart
- HDMI-PC
Each connection type is switched on for 30 seconds. The VFD displays the
connection type which is currently active. You can either wait until the
connection type you want is displayed and your TV shows a picture or you
can select the connection type with Up and Down buttons on the remote control.
Confirm the desired connection type with the Ok button. After that you can
proceed with the configuration supported by the configuration wizard.
The image contains a default channel table. If you want to replace it you can
perform a channel scan later.
Network configuration
---------------------
The U-Boot settings contain the following configuration by default:
MAC address 00:3e:9e:11:22:33
IP address 192.168.178.100
That is after booting the image you can login via telnet if your computer is in
the same subnet.
These values are set up by the U-Boot. You can change the values
in Enigma2 menu "Settings/System/Network.../Adapter settings".
Playback ****
-------------
Play - shows the file list
Pause - pauses playback or activates timeshift
Stop - stops playback or timeshift
Record - opens the record dialog for starting stopping recording
Yellow - pause/unpause playback
Green - continue playback
Red - jump to the beginning
Blue - jump to the next bookmark
1/3 jump 15 seconds backwards/forwards (configurable in the settings menu)
4/6 jump 60 seconds backwards/forwards (configurable in the settings menu)
7/9 jump 5 minutes backwards/forwards (configurable in the settings menu)
Full *** map can be found in the file /usr/local/share/enigma2/keymap.xml.
Team Ducktales
Quelle: AAF Board
Download in der Database
MfG henrylicious
Ich gebe keine Auskünfte über PN, alle Fragen sollen bitte im Forum gestellt werden!!
Ich gebe keine Auskünfte über PN, alle Fragen sollen bitte im Forum gestellt werden!!