Bildflackern, Flackern bei Anzeige der UI, Flackern des Spinners wenn oscam aktiv ist

    • Bildflackern, Flackern bei Anzeige der UI, Flackern des Spinners wenn oscam aktiv ist

      Hallo!

      Ich habe das Image "HDMU_11424_E2_spark_211_git_5556_nodebug_gst_Flash" installiert und u.a. das Plugin "oscam8841".

      Funktional gibt es keine Probleme, allerdings ist das System instabil, d.h.
      • das Bild flackert,
      • der Spinner erscheint regelmäßig und flackert,
      • bei Anzeige der UI flackert diese und das Gerät läßt sich nicht mehr steuern.


      Wenn ich mir die Prozessliste anzeige kann ich nicht erkennen, dass der Receiver dauerhaft an seiner Leistungsgrenze liefe.
      Es ist mir dann doch gelungen eine Prozessübersicht zu snapshotten, bei der die CPU-Auslastung usr bei über 88% lag.

      Quellcode

      1. Mem: 54832K used, 62144K free, 0K shrd, 0K buff, 10384K cached
      2. CPU: 0.0% usr 88.2% sys 5.8% nic 5.8% idle 0.0% io 0.0% irq 0.0% sirq
      3. Load average: 14.69 7.39 2.92 3/76 2266
      4. PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
      5. 1099 2 root DW< 0 0.0 0 26.8 [pti_task]
      6. 491 2 root RWN 0 0.0 0 17.9 [jffs2_gcd_mtd6]
      7. 1690 493 root D 71680 61.2 0 13.4 /usr/local/bin/enigma2
      8. 2266 2043 root R 2188 1.8 0 13.4 top
      9. 2138 2 root DW 0 0.0 0 13.4 [H264 Codec Int]
      10. 2141 2 root DW 0 0.0 0 4.4 [Interocitor 0]
      11. 2136 2 root DW 0 0.0 0 4.4 [Player Aud 3]
      12. 2187 2186 root S < 12284 10.5 0 0.0 /usr/emu/oscam8841 -b -c /usr/keys
      13. 1214 493 root S 9856 8.4 0 0.0 /bin/evremote2 10 120
      14. 2043 1216 root S 2628 2.2 0 0.0 -sh
      15. 1216 1 root S 2628 2.2 0 0.0 /usr/sbin/telnetd
      16. 2186 1 root S 2344 2.0 0 0.0 /usr/emu/oscam8841 -b -c /usr/keys
      17. 493 492 root S 2188 1.8 0 0.0 {rcS} /bin/sh /etc/init.d/rcS
      18. 1223 1 root S 2188 1.8 0 0.0 /usr/sbin/inetd
      19. 2023 1 root S 2188 1.8 0 0.0 udhcpc -R -n -p /var/run/udhcpc.et
      20. 551 1 root S 2132 1.8 0 0.0 /usr/sbin/automount --ghost --time
      21. 1222 1 root S 2132 1.8 0 0.0 /usr/bin/vsftpd
      22. 1212 1 root S 1664 1.4 0 0.0 /usr/bin/lircd
      23. 1 0 root S 1388 1.1 0 0.0 {init} ini
      24. 492 1 root S 1388 1.1 0 0.0 {init} ini
      25. 542 1 bin S 1372 1.1 0 0.0 /sbin/portmap
      26. 336 2 root SW 0 0.0 0 0.0 [mtdblockd]
      27. 2134 2 root DW 0 0.0 0 0.0 [Player Aud 1]
      28. 2133 2 root DW 0 0.0 0 0.0 [Player Aud 0]
      29. 2135 2 root DW 0 0.0 0 0.0 [Player Aud 2]
      30. 2131 2 root SW 0 0.0 0 0.0 [HostRec40800004]
      31. 2132 2 root DW 0 0.0 0 0.0 [Player Aud Mixe]
      32. 2137 2 root SW 0 0.0 0 0.0 [HostRec40800005]
      33. 2145 2 root SW 0 0.0 0 0.0 [HostRec40800006]
      34. 2143 2 root DW 0 0.0 0 0.0 [Interocitor 2]
      35. 500 2 root DW 0 0.0 0 0.0 [button/0]
      36. 5 2 root SW 0 0.0 0 0.0 [khelper]
      37. 1141 2 root DW 0 0.0 0 0.0 [SMART/0]
      38. 2144 2 root DW 0 0.0 0 0.0 [Interocitor 3]
      39. 2142 2 root DW 0 0.0 0 0.0 [Interocitor 1]
      40. 2070 2 root SW 0 0.0 0 0.0 [kdvb-ad-0-fe-0]
      41. 2 0 root SW 0 0.0 0 0.0 [kthreadd]
      Alles anzeigen


      Generelle Frage:
      Ist dieser Receiver ungeeignet für den Betrieb mit E2, wenn gleichzeit auch noch ein Emu läuft?

      Frage zu dem Problem:
      Ist dieses Problem bekannt, und wenn ja, worin liegt dir Ursache?

      THX

    Unsere Partnerboards

    ^
    Flag Counter