works without any problem.

Flash original-image again.

With enabled oscam ymod t44 it crashes on Rai 3 TGR FVG. ymod disabled no crashes.

With enabled oscam 1.20 8658 no crashes.

You see the solution

Regards

Now i have it.

Open your settings with the SettingsEditor "dreamboxEDIT". Then you must doubleclick on every Rai-Channel that crashes on the left side, not in the bouquets.
After doubleclick, it comes a new window. There you must set the Flags "K" and "P" for the channels.

See the screenshot for the settings in "dreamboxEDIT". In the screenshot is the language german, but you can switch the language. It should be the same entry at every language?!

Since 30 min no crashes(only tested without activated cam). I'm switching between the Channels, no more problems with this settings. Report when you have still problems .

Regards

It runs here since i have tested these settings without crashes. You must load your settings/channellists into "dreamboxEDIT" from your STB. Then you must set the flags for the channels.
Next step is save the changes in "dreamboxEDIT". That is important!!! Without these, nothing works.
Next step is send the new settings/channellists from "dreamboxEDIT" to your STB.
Next Step is restart the STB.

It works perfectly here on original Hyperion v2.

"hyperion 2.0" is a "mod" Image. Not the original. The original calls Hyperion v2.

What HDMU and rsp says is uninteresting. The problem can solves without any changes in the system(the log says it gives two ways) . I can see it here without any crashes;) .

Regards

So now it runs like me? Perfectly?

Regards

Thanks for your reply!!!

Regards and have fun with it

Friends..

im also suffering how to solve this..

"""After doubleclick, it comes a new window. There you must set the Flags "K" and "P" for the channels.""



after this setting, i have NO picture in box.. if i checked the P - no pic- on this selected chanell-- every other works.
if i remove P- its crashes but have picture..



any ide from anybody?

DreamboxEdit saves the settings from your STB in a directory on PC, or other. To send the complete directory to me, it is to big for PN.

Upload it here(i dont know, it is allowed to you?). Or upload it anyway on the inet and link it here. I control this on my Box, with your settings.

You have Hyperion on your Box?

Regards

THX 4 care,

i modify the last vhanibbal settings from 06-09. as you shown on pic and describe,
only modiy the rai1 and raiHD--

YES i HAD HYPERION on my box, but i just changed it to nebula for testing

they heve no picture now,

btw: i found one pkt nebula v3 on my pc, upload to box and have no problemanymore with rai,but im just want to know how did you do to have picture on rai with hyperion...

Here is the link.
:


www64.zippyshare.com/v/69601001/file.html

These settings are bad .

I make a new Channelsearch on Hotbird and after the search i bring the settings back to PC. There i set the flags new in DreamboxEdit(after search it is a must). With the complete saving in DreamboxEdit, of course.
Then i send the settings back to STB. After this i make a restart.

It runs here now without crashes.

In the attachment is the new "Vhannibal E2 Dual Feeds 06 set-new"-Directory.

Send this to STB with DreamboxEdit. Then make a restart for safety reason.

Please report when you have problems .

Regards

OKAY
friend

-the settings is from vhannibal official page.. without the change..


let me try this...

i will back to you

t.

ALL right--
it seams the thing is working now...

thank you so much.

To this time the settings go here. When it gives problems again, report here. I see again whats happend. I need now my settings .

Regards and have fun