Neutrino test: spark7162_BASE-rev5748_NHD2e-rev1352 - feedback and questions

    • Perhaps this might help with your mount problems. Neutrino-martiiGit-by-FFTeam,HFD-31-10-2012

      I use it in a NHD2-Image with automount.
      Greetz von DrStoned :D :D :D

      Golden Media TripleX | Amiko Alien 2 | Dreambox DM7025SS | Dbox2 Nokia SAT AVIA 500 mit 64 MB RAM, HDD 100GB im Wechselrahmen, CF-Kartenslot, USB-Schnittstelle und Multicam |
      Datenspeicher für alle Receiver: Synology DS212j über NFS

    • Thanx for the link/help, Thomas! That's appreciated.

      HND2 is way better than MP, for sure, as it is not restricted in that silly manner, from tuner onwards!

      MOUNTING VIA HOME NETWORK:

      This morning I played with fstab mounting. It didn't work with nfs, at first. Then, I added /volume1 (before the shared folder itself) and rebooted. WORKS LIKE A CHARM!!! :allesgute: That's much better than via Neutrino's folder mounting, I assure you - which needs looking into...

      AUDIO-VISUAL PART:

      Passthrough gives great results in audio terms!!! I have Panasonic Home Theatre with JBL speakers (3 in front) and JPW rear monitors - fabulous!

      DVD Player, sadly, does not open a whole folder but one must add one file at the time, which could and should be improved. Media Centre in Mips and Sigma processor STBs can do it, so Neutrino can, too.

      Couldn't find a way to get the subtitles in DVDs. Is it possible?

      Sadly, the Media Player itself is limited, too - in terms of codecs/formats it will play. From both my NAS and laptop Star Trek Deep Space Nine.avi files do not show any image, sadly... Codec: MS MPEG-4 Video v3 (DIV3). Can gstreamer (or whatever is used in Neutrino) be updated, please?

      SAT TV PART:

      I sent an E2 modified channels list (DreamSet is the tool for the purpose but it must be properly configured for this, choosing the correct format [Neutrino Plus api v.3] and adding the satellite positions in the correct format, i.e. 192 for Astra1 and 130 for HB). Tick the "Do not send the reload command after the transfer" as it does not work, like in E2. Oh, I also removed the tick in "passive mode only" option. Reboot NHD manually.

      Before I rebooted, I sent the emus and config file via FTP (File Zilla Client), gave 755 to modules (modules path is /var/emu and config files /var/keys).

      Having rebooted, I notice that in my list - which is generally good and as it should be - many channels are "not available" for some reason.... Rebooted several times until it booted properly. Still, instead of the chosen TV Globo Brazilian channel what comes up is HRT1, which is nuts... :D

      SD channels are great, in CS, $ly IT is going great, better than on my Ferrari500HD!

      HD CHANNELS PROBLEM ON 13E

      Now, my colleagues stated that in their Neutrino tests HD channels have caused complete freezes and that is why they moved back to E2, else they would have used Neutrino. Let's see if.... Ooopppssss.... $ly IT HD channels are murder - constant reboots and freezes... Something needs to be done here... Perhaps you guys need another LNB? Or a guy who can code and who already has that LNB on 13E... ;)

      OK, Ymod 39 does not work with keys in my case... Don't know why, must investigate. Can we have a slightly different, a more discerning script in plugins, which can detect what we installed, so we can have various versions of OSCam, as some open certain stuff but not other channels and vice versa...

      It all went bonkers, in my list - I choose a channel and get the previous channel - can't change it...

      I think I need to reinstall... Good going, so far!!! :thx:

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von gorski ()

    • Thanx, m8!

      DrStoned schrieb:

      Perhaps this might help with your mount problems. Neutrino-martiiGit-by-FFTeam,HFD-31-10-2012

      I use it in a NHD2-Image with automount.
      I believe this is the best format for Synology:

      Quellcode

      1. 192.168.x.x:/volume1/video /mnt/nfs/films nfs rw,tcp,wsize=32768,rsize=32768 0 0


      For Windows7 CIFS, sharing without username/password:

      Quellcode

      1. //192.168.x.x\\Videos /mnt/hdd/Bvid cifs rw,tcp,wsize=32768,rsize=32768,user=,pass= 0 0


      It just works in NHD2! :danke:

    • OK, second installation from scratch - just to make sure... - now, let's see...

      Really good and fast opening a channel with various OSCams.... This time it worked for a while on HD channels (Primafila) before it crashed (Shutdown or reboot). But once it started crashing - real problems on $ly IT, sadly... But I think it is my main peer, who is possibly doing some work on his server...

      Sometimes stuck on HRT2, for no reason, as other HRT channels are fine. Reboots seem to screw up some thing occasionally and then one can see some problems...

      Not working with keys on TV Globo - is there a new key, I wonder... Must check... Nope, old but not working...

      Btw, I would
      love to be able to "record" all those little or bigger bugs for you but how do I get the log
      running, in NHD2, please? Init 4 and enigma2 in E2 - but Neutrino?

      init 4 and neutrino tried aaaandddd....

      Quellcode

      1. BusyBox v1.21.0 (2013-06-17 10:08:20 CEST) built-in shell (ash)
      2. Enter 'help' for a list of built-in commands.
      4. spark7162:~# init 4
      5. spark7162:~# neutrino
      6. >>> NeutrinoHD2 (compiled Jun 17 2013 10:29:42) <<<
      7. starting /usr/local/bin/neutrino
      8. CFrameBuffer::getInstance: frameBuffer Instance created
      9. CFrameBuffer::init 12288k video mem
      10. CFrameBuffer::setMode: FB: 1280x720x32
      11. NeutrinoApp Instance created
      12. CNeutrinoApp::loadSetup
      13. CNeutrinoApp::SetupFonts: settings font file /usr/share/fonts/neutrino.ttf
      14. CFrontend::Open /dev/dvb/adapter0/frontend0 Dummy DVB-T
      15. CFrontend::Close fe(0,0) Dummy DVB-T
      16. CFrontend::Open /dev/dvb/adapter0/frontend1 Tuner1-Sat
      17. CFrontend::Close fe(0,1) Tuner1-Sat
      18. CFrontend::Open /dev/dvb/adapter0/frontend2 Tuner2-Sat
      19. CFrontend::Close fe(0,2) Tuner2-Sat
      20. getServices:loadTransponders:
      21. getServices:LoadServices:
      22. getservices:FindTransponder: going to parse dvb-s provider Hot Bird 6/8/9 (13.0E ) position 130
      23. getservices:FindTransponder: going to parse dvb-s provider Astra 1H/1KR/1L/1M (1 9.2E) position 192
      24. getservices:loadingmotorpositions...
      25. [zapit] 3115 services loaded (3115)...
      26. /tmp/currentservices.xml: No such file or directory
      27. getservices:FindTransponder: going to parse dvb-s provider Astra (19.2E) positio n 192
      28. [zapit] duplicate transponder id 2dc800c000030085 freq 11720000
      29. [zapit] duplicate transponder id 2dee00c000110085 freq 11758000
      30. [zapit] duplicate transponder id 2e1600c000020085 freq 11798000
      31. [zapit] duplicate transponder id 2f0000c000040085 freq 12032000
      32. [zapit] duplicate transponder id 2f2600c000010085 freq 12070000
      33. reading /var/tuxbox/config/zapit/bouquets.xml
      34. reading /var/tuxbox/config/zapit/ubouquets.xml
      35. /tmp/currentservices.xml: No such file or directory
      36. channels have been loaded succesfully
      37. zapit:leaveStandby
      38. cVideo::Open /dev/dvb/adapter0/video0
      39. cAudio::Open /dev/dvb/adapter0/audio0
      40. [pmt] stop update filter
      41. stopPlayBack sending capmt....
      42. [zapit] stopPlayBack: standby 0 forced 0
      43. CFrontend::Open /dev/dvb/adapter0/frontend1 Tuner1-Sat
      44. getFrontend Selected fe: (0,1)
      45. zapit zap to HRT-TV1(c4222328013e206d) fe(0,1)
      46. CFrontend::setParameters: fe(0,1) freq= 1920000 (offset= 10600000) fec= 3
      47. poll has event after: 0 msec (min 0 max 0)
      48. poll has event after: 167 msec (min 0 max 167)
      49. cFrontend::getEvent fe(0,1) FE_HAS_LOCK: freq 1920000
      50. CFrontend::setParameters: fe(0,1) tuned
      51. parse_channel_pat_pmt looking up pids for channel_id (c4222328013e206d)
      52. [pmt]parse_pmt: parsing pmt pid 0x21
      53. Open: setting /dev/dvb/adapter0/demux1 to source 1
      54. [pmt]parse_pmt: pcr pid: old 0x0 new 0x64
      55. [pmt]parse_ES_info: vpid 0x64 stream 2 type 0
      56. [pmt]parse_ES_info: apid 0x65 hrv
      57. TuxTxt subtitle set pid 0 page 0 lang (0)
      58. [zapit] setVolumePercent: current_volume 90 volume_percent 0 percent 0
      59. [zapit] vol 90 current_volume 90 volume_percent 0
      60. zapit:startPlayBack: vpid 0x64 apid 0x65 pcrpid 0x64
      61. [zapit] starting MPEG2 audio Pid: 0x65
      62. [zapit] starting MPEG2 video Pid: 0x64
      63. zapit sending capmt....
      64. CCam::setCaPmt: demux_index:(1) camask:(2) update:(no)
      65. [pmt] pmt_set_update_filter: sid 0x206d pid 0x21 version 0x2
      66. CNeutrinoApp::run: zapit ready
      68. dvbsub_init: starting... tid 1932
      69. [audio_cs.cpp]:SetHdmiDD downmix
      70. CRCInput::loadKeymap:
      71. [timerd] startup, tid 1955
      72. [timermanager] wakeup from standby: no
      73. [yhttpd] Webserver nhttpd/3.3.2 (yhttpd_core/1.3.1) tid 1956
      74. [streamts] Starting STREAM thread keeper, tid 1957
      75. [streamts] listenfd 25
      76. $Id: sectionsd.cpp,v 1.305 2009/07/30 12:41:39 seife Exp $
      77. ====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
      78. /dev/input/event2: No such device
      79. /dev/input/event3: No such device
      80. [timermanager] timermanager created
      81. [dvbsub @ 0xcf7ba0] Invalid extradata, subtitle streams may be combined!
      82. [sectionsd] Caching max 50000 events
      83. [sectionsd] Caching 7 days
      84. [sectionsd] Caching 3 hours Extended Text
      85. [sectionsd] Events are old 60min after their end time
      86. /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
      87. CNeutrinoApp::run: menue setup
      88. CNeutrinoApp::InitMainMenu
      89. [playback_cs.cpp]:cPlayback
      90. $Id: moviebrowser.cpp,v 1.10 2006/09/11 21:11:35 guenther Exp $
      91. [mb]->init
      92. [mb]->initGlobalSettings
      93. CMovieBrowser::loadSettings
      94. [ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for readin g.
      95. CMovieBrowser::loadSettings failed
      96. [mb]->initFrames
      97. [mb]->initRows
      98. [mb]->refreshFilterList 20
      99. CNeutrinoApp::InitServiceSettings
      100. CNeutrinoApp::InitServiceSettings. init soft-update-stuff
      101. CNeutrinoApp::InitLanguageSettings
      102. CNeutrinoApp::InitAudioplayerSettings
      103. CNeutrinoApp::InitPicViewerSettings
      104. CNeutrinoApp::InitMiscSettings
      105. CNeutrinoApp::InitVideoSettings
      106. CNeutrinoApp::InitAudioSettings
      107. CNeutrinoApp::InitParentalLockSettings
      108. CNeutrinoApp::run: registering as event client
      109. CNeutrinoApp::InitNetworkSettings
      110. CNetworkConfig: eth0 loaded, wireless no
      111. CNeutrinoApp::InitKeySettings
      112. CNeutrinoApp::InitColorSettings
      113. CNeutrinoApp::InitLanguageSettings
      114. CNeutrinoApp::channelsInit: Creating channels lists...
      115. CNeutrinoApp::channelsInit: got 2683 TV (490 is HD) and 432 RADIO channels
      116. [sectionsd] Reading Information from file /var/epg/index.xml:
      117. CNeutrinoApp::channelsInit: created Hot Bird 6/8/9 (13.0E) with 1357 TV and 242 RADIO channels
      118. CNeutrinoApp::channelsInit: created Astra 1H/1KR/1L/1M (19.2E) with 1326 TV and 190 RADIO channels
      119. CNeutrinoApp::channelsInit: got 68 TV bouquets
      120. CNeutrinoApp::channelsInit: got 33 RADIO bouquets
      121. CNeutrinoApp::SetChannelMode LIST_MODE_ALL
      122. CNeutrinoApp::channelsInit: All bouquets-channels received
      123. CNeutrinoApp::SetChannelMode LIST_MODE_ALL
      124. CBouquetList::adjustToChannelID to c4222328013e206d
      125. CBouquetList::adjustToChannelID to c4222328013e206d
      126. CRemoteControl::processAPIDnames: apid name= hrv (Croatian) pid= 0x65
      127. CRemoteControl::processAPIDnames: pref_found 0 pref_ac3_found -1 ac3_found -1
      128. StartSubtitles: Show
      129. [dvb-sub] start, stopped 1 pid 0
      130. TuxTxt subtitle unpause, running 0 pid 0 page 0
      131. CNeutrinoApp::InitRecordingSettings
      132. CNeutrinoApp::InitStreamingSettings
      133. CNeutrinoApp::InitLcdSettings
      134. VFDPWRLED: Invalid argument
      135. CNeutrinoApp::AudioMute: current_muted 0 new 0 isEvent: 1
      136. CNeutrinoApp::RealRun: initialized everything
      137. [CPlugins] could not find startup.cfg
      138. [audio_cs.cpp]:SetMute (0)
      139. [neutrino] StopSubtitles
      140. parseXmlFile: Error parsing "/var/epg/013e2328206d.xml": not well-formed at line 299
      141. parseXmlFile: Error parsing "/var/epg/013e2328206e.xml": not well-formed at line 83
      142. parseXmlFile: Error parsing "/var/epg/013e2328206f.xml": not well-formed at line 35
      143. parseXmlFile: Error parsing "/var/epg/013e23282076.xml": not well-formed at line 1139
      144. [sectionsd] Reading Information finished after 2677 miliseconds (1784 events)
      Alles anzeigen


      This command froze my box... Restart at the back!

    • So, let's see what have I missed the first time...?

      I asked last time:
      P.S. Any chance of fstab syntax to mount NFS and CIFS shared folders that way, please?
      And the response was:
      i think this not the right way to get network devices mounted, better is
      to use automount as far neutrino network mount manager can't do this
      correctlly

      @DBO:

      is automount built in the image?
      I do not see it. And even if it was I would have preferred a good device
      manager. Imagine, for instance, 2 partitions on a USB stick and an HDD - how do you do it? I know
      in PBNIGMA, it's a piece of cake but automount?

      So, the questions:
      @gorsky:

      not sure but i have some doubt why this can't work, can u plz check after new start

      - cat /proc/filesystems

      - try to mount any network device

      - again cat /proc/filesystems
      I think I will pass on this one, as fstab editing does the job stably and perfectly! Stibbich from PB Team doesn't like this but I can see how in a situation like this it is perfectly acceptable, with all due respect to the master...

      I can't delete whole satellite positions via remote. Can that be remedied, please? In other flavours of Neutrino I saw "Erase all channels" function. This is sometimes very useful.
      and now back to usefull functions of enigma2 and neutrino:

      - i have on my mipsel box (Gigablue800HD) both GUI running:

      enigma2 and neutrino (NHD2) and often i get frustration when i change to
      enigma2 (i do this just to borrow some stuff from enigma2 to neutrino
      ;)

      - DVB

      i'm cable user (unity media provider)

      -TV/Radio: i can enjoy this only when i use neutrino :D with e2 i have oft channel faild (sid not found in PAT).

      -epg/epgplus

      -teletext/dvbsubs/recording/timeshift: is same

      only sometimes when playing timeshift/records i have some probs while
      i'm using gst player also for ts files e2 is using internal player (dvr)

      -radiotext/rass

      -pip (not implemtend in nhd2) drivers of my both boxes cant do this sadly ;(

      -overlapping recording (not implemented in NHD2) NMP can do this.

      -online software update neutrino can this also

      -plugins/games there is a lot usefull plugins/games for neutrino (weather, etc...)

      etc...
      Yes, lots of little and big jobs for you, guys, bringing Neutrino to full functionality, aren't there?

      Some advantages to Neutrino but not many, especially if one is not "just Astra 19E user"...
      MEDIA:

      -ts/movie player like in e2

      -picviewer

      -audioplayer

      -internetradio

      -upnp browser

      -yt player

      -webtv

      etc...
      Lots
      of these are not working or working partially, missing codecs or
      functionality, like in DVD not being able to choose properly which part
      of a DVD to watch...
      the main difference is e2 use skin and easy api for plugins and neutrino not.
      Is this why we have very, very few plugins/tools for Neutrino?
      PS: can u plz reorder the bugs from your test for NMP and NHD2 ;)
      I beg your pardon? What exactly do you have in mind and why, please?

    • OK, here you are:

      Quellcode

      1. BusyBox v1.21.0 (2013-06-17 10:08:20 CEST) built-in shell (ash)
      2. Enter 'help' for a list of built-in commands.
      4. spark7162:~# cat /proc/filesystems
      5. nodev sysfs
      6. nodev rootfs
      7. nodev bdev
      8. nodev proc
      9. nodev tmpfs
      10. nodev debugfs
      11. nodev sockfs
      12. nodev usbfs
      13. nodev pipefs
      14. nodev anon_inodefs
      15. nodev rpc_pipefs
      16. nodev devpts
      17. ext3
      18. ext2
      19. nodev ramfs
      20. vfat
      21. msdos
      22. iso9660
      23. nodev nfs
      24. nodev nfsd
      25. nodev cifs
      26. ntfs
      27. nodev jffs2
      28. nodev fuse
      29. fuseblk
      30. nodev fusectl
      31. udf
      32. jfs
      33. nodev autofs
      34. spark7162:~#
      Alles anzeigen


      Tried accessing my NFS shared folders from my NAS but mounted via fstab, as nothing else works:

      Quellcode

      1. spark7162:~# cat /proc/filesystems
      2. nodev sysfs
      3. nodev rootfs
      4. nodev bdev
      5. nodev proc
      6. nodev tmpfs
      7. nodev debugfs
      8. nodev sockfs
      9. nodev usbfs
      10. nodev pipefs
      11. nodev anon_inodefs
      12. nodev rpc_pipefs
      13. nodev devpts
      14. ext3
      15. ext2
      16. nodev ramfs
      17. vfat
      18. msdos
      19. iso9660
      20. nodev nfs
      21. nodev nfsd
      22. nodev cifs
      23. ntfs
      24. nodev jffs2
      25. nodev fuse
      26. fuseblk
      27. nodev fusectl
      28. udf
      29. jfs
      30. nodev autofs
      31. spark7162:~#
      Alles anzeigen

    • Sure.... :)

      Try this : spark7162_DUAL_g5905_HALe_r455_NMPe_r5564_NHD2e_r1561_flash.zip

      It contains both Neutrinos ( NMP, NHD2 ) > simple switching via script ( blue > plugins or blue > scripts )
      All new features are integrated : YouTube Player, Making Filmcover while playing *.ts with REC button ( press pause for Speed this up ), web-if streaeming and simultanous looking and switching others on live-tv.....

    • Mal ne kleine Frage, gibt es eine Möglichkeit bei Neutrino in der Timerliste so wie bei E2 einzustellen was der Receiver nach der Aufnahme machen soll also Standard/Standby/Ausschalten ?
      Bei meiner alten DBox2 mit IDE-Interface war es unter Neutrino damals immer so das die Box aus dem DeepStandby gestartet wurde und nach der Aufnahme auch wieder runtergefahren ist, es wäre schön wenn das bei spark7162 NHD2-Images auch klappen würde.

      Gruß
      Tom

    • eigentlich schon, wenn neutrino aus deepstandby startet und aufnimmt nach beendung der aufnahme schaut er nach timers in 10 min (weitere aufnahme zap etc...) falls da nichts steht schickt er die Box wieder im standby.

      ob das jetzt funktioniert ist auch vom image abhängig bei den aktuellen TDT treiber die timers werden von einen anderen Deamon getriggert (fp_control) habe auch gelesen dass es geht :D

      Mal ne kleine Frage, gibt es eine Möglichkeit bei Neutrino in der Timerliste so wie bei E2 einzustellen was der Receiver nach der Aufnahme machen soll also Standard/Standby/Ausschalten ?

      hatte mal in einem anderen forum so wie ein Frage gestellt ob das auch Sinn in neutrino zu implementieren ist aber unter Tisch gegangen

    Flag Counter