Hi
Herebelow the log.
Crash occurs when clicking UP key to enter the channel list.
Please note that the latest version 0.7.4-beta of Cubicstreamer is installed (found no further version).
Thanks/Ciao
DVBLocalTimerHandler] remove channel 0x1639508
[eEPGCache] remove channel 0x1639508
allocate channel.. 0444:0001
opening frontend 1
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12246000 Pol 1 SR 29700000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 1
tuning to 1646 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:19D6:444:1:C00000:0:0:0:
allocate demux
IBTS show
[SEC] invalidate current switch params
IBTS tunerShow
IBTS updateNextTimer 0
[SEC] setVoltage 1
[SEC] sleep 50ms
[SEC] setTone 1
[SEC] sleep 50ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
(1)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(1)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x73ad44d0 running
[eEPGCache] channel 0x73ad44d0 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 23:42:15
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
PATready
use pmtpid 0578 for service_id 19d6
eventNewProgramInfo 0 0
have 1 video stream(s) (0582), and 1 audio stream(s) (058d), and the pcr pid is 0582, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=1410, apid=1421
DMX_SET_PES_FILTER(0x582) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x58d) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x582) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
setPixmapNum(0) failed! defined pixmaps: []
[Volume Adjust] Update Info
[Volume Adjust] Volume = 100
[Volume Adjust] load xml...
[Volume Adjust] New Channel
[Volume Adjust] oldvol = 0
[AutoRes] service changed
[eDVBCAService] new service 1:0:1:19D6:444:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:19D6:444:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
sdt update done!
IBTS hide
IBTS tunerHide
[AutoRes] determineContent
[EPGC] start caching events(1362782536)
close frontend 0
action -> OkCancelActions ok
playing 1:0:1:19A:3264:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:19D6:444:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:19D6:444:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] setPara max-X=1 max-Y=1 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] decode picture... /usr/lib/enigma2/python/Plugins/Extensions/CoolTVGuide/Cool3D/dummy.png
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x73ad44d0
[eEPGCache] remove channel 0x73ad44d0
[EPGC] abort caching events !!
allocate channel.. 3264:013e
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11096000 Pol 0 SR 29900000 INV 2 FEC 2 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1346 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:19A:3264:13E:820000:0:0:0:
allocate demux
[SEC] set static current limiting
IBTS show
[SEC] invalidate current switch params
IBTS tunerShow
IBTS updateNextTimer 0
[SEC] setVoltage 2
[SEC] sleep 50ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x738a4d40 running
[eEPGCache] channel 0x738a4d40 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 2 sec
slot: 0x7d8a70
95 02 00 03
recvCloseSessionRequest
close Session Request
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 23:42:21
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
slot: 0x7d8a70
91 04 00 03 00 41
CA MANAGER
new session nb 3 0x27a85d8
sendOpenSessionResponse
slot: 0x7d8a70
90 02 00 03 9f 80 31 06 0b 00 26 00 05 00
SESSION(3)/CA 9f 80 31: 0b 00 26 00 05 00
ca info:
0b00 2600 0500
slot: 0x7d8a70
95 02 00 03
recvCloseSessionRequest
close Session Request
[DVBCAHandler] no more services
[EPGC] start caching events(1362782542)
slot: 0x7d8a70
91 04 00 03 00 41
CA MANAGER
new session nb 3 0x295a198
sendOpenSessionResponse
playing 1:0:1:1AF6:3FE:1:C00000:0:0:0:
start release channel timer
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] setPara max-X=1 max-Y=1 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] decode picture... /usr/lib/enigma2/python/Plugins/Extensions/CoolTVGuide/Cool3D/dummy.png
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x738a4d40
[eEPGCache] remove channel 0x738a4d40
[EPGC] abort caching events !!
allocate channel.. 03fe:0001
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11538000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1788 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1AF6:3FE:1:C00000:0:0:0:
allocate demux
slot: 0x7d8a70
90 02 00 03 9f 80 31 06 0b 00 26 00 05 00 95 02 00 03
SESSION(3)/CA 9f 80 31: 0b 00 26 00 05 00
ca info:
0b00 2600 0500
SESSION(3)/CA 95 02 00: 00 00 00
SESSION(3)/CA 00 00 00:
PC: 00527738
00000000 10008b00 00000000 00000000
25daeb30 7f857308 00000001 00000000
00000000 00000000 00000001 fffffff8
00000000 00000000 00000000 00000001
59aa8855 25daeb2d 25daeb30 00000001
00626994 00000012 006264f4 7f858f18
00000002 7716af70 00000001 00000000
0069d110 7f8572f0 7f858410 0052834c
As a final action, i will try to dump a bit of code.
I just hope that this won't crash.
00527738: 00 00 82 90 00 1e 02 00 03 1e 03 00 04 00 60 04 00 00 00 00 00 00 a2 ac 08 00 e0 03 01 00 02 24 (end)
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</OpenHDF>
Herebelow the log.
Crash occurs when clicking UP key to enter the channel list.
Please note that the latest version 0.7.4-beta of Cubicstreamer is installed (found no further version).
Thanks/Ciao
DVBLocalTimerHandler] remove channel 0x1639508
[eEPGCache] remove channel 0x1639508
allocate channel.. 0444:0001
opening frontend 1
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12246000 Pol 1 SR 29700000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 1
tuning to 1646 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:19D6:444:1:C00000:0:0:0:
allocate demux
IBTS show
[SEC] invalidate current switch params
IBTS tunerShow
IBTS updateNextTimer 0
[SEC] setVoltage 1
[SEC] sleep 50ms
[SEC] setTone 1
[SEC] sleep 50ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
(1)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(1)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x73ad44d0 running
[eEPGCache] channel 0x73ad44d0 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 23:42:15
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
PATready
use pmtpid 0578 for service_id 19d6
eventNewProgramInfo 0 0
have 1 video stream(s) (0582), and 1 audio stream(s) (058d), and the pcr pid is 0582, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=1410, apid=1421
DMX_SET_PES_FILTER(0x582) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x58d) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x582) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
setPixmapNum(0) failed! defined pixmaps: []
[Volume Adjust] Update Info
[Volume Adjust] Volume = 100
[Volume Adjust] load xml...
[Volume Adjust] New Channel
[Volume Adjust] oldvol = 0
[AutoRes] service changed
[eDVBCAService] new service 1:0:1:19D6:444:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:19D6:444:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
sdt update done!
IBTS hide
IBTS tunerHide
[AutoRes] determineContent
[EPGC] start caching events(1362782536)
close frontend 0
action -> OkCancelActions ok
playing 1:0:1:19A:3264:13E:820000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:19D6:444:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:19D6:444:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] setPara max-X=1 max-Y=1 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] decode picture... /usr/lib/enigma2/python/Plugins/Extensions/CoolTVGuide/Cool3D/dummy.png
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x73ad44d0
[eEPGCache] remove channel 0x73ad44d0
[EPGC] abort caching events !!
allocate channel.. 3264:013e
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11096000 Pol 0 SR 29900000 INV 2 FEC 2 orbpos 130 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1346 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:19A:3264:13E:820000:0:0:0:
allocate demux
[SEC] set static current limiting
IBTS show
[SEC] invalidate current switch params
IBTS tunerShow
IBTS updateNextTimer 0
[SEC] setVoltage 2
[SEC] sleep 50ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x738a4d40 running
[eEPGCache] channel 0x738a4d40 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 2 sec
slot: 0x7d8a70
95 02 00 03
recvCloseSessionRequest
close Session Request
[SEC] set dynamic current limiting
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 23:42:21
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
slot: 0x7d8a70
91 04 00 03 00 41
CA MANAGER
new session nb 3 0x27a85d8
sendOpenSessionResponse
slot: 0x7d8a70
90 02 00 03 9f 80 31 06 0b 00 26 00 05 00
SESSION(3)/CA 9f 80 31: 0b 00 26 00 05 00
ca info:
0b00 2600 0500
slot: 0x7d8a70
95 02 00 03
recvCloseSessionRequest
close Session Request
[DVBCAHandler] no more services
[EPGC] start caching events(1362782542)
slot: 0x7d8a70
91 04 00 03 00 41
CA MANAGER
new session nb 3 0x295a198
sendOpenSessionResponse
playing 1:0:1:1AF6:3FE:1:C00000:0:0:0:
start release channel timer
[Picload] setPara max-X=100 max-Y=60 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] setPara max-X=1 max-Y=1 aspect_ratio=1.000000 cache=0 resize=1 bg=#00000000
[Picload] decode picture... /usr/lib/enigma2/python/Plugins/Extensions/CoolTVGuide/Cool3D/dummy.png
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x738a4d40
[eEPGCache] remove channel 0x738a4d40
[EPGC] abort caching events !!
allocate channel.. 03fe:0001
(1)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11538000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1788 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1AF6:3FE:1:C00000:0:0:0:
allocate demux
slot: 0x7d8a70
90 02 00 03 9f 80 31 06 0b 00 26 00 05 00 95 02 00 03
SESSION(3)/CA 9f 80 31: 0b 00 26 00 05 00
ca info:
0b00 2600 0500
SESSION(3)/CA 95 02 00: 00 00 00
SESSION(3)/CA 00 00 00:
PC: 00527738
00000000 10008b00 00000000 00000000
25daeb30 7f857308 00000001 00000000
00000000 00000000 00000001 fffffff8
00000000 00000000 00000000 00000001
59aa8855 25daeb2d 25daeb30 00000001
00626994 00000012 006264f4 7f858f18
00000002 7716af70 00000001 00000000
0069d110 7f8572f0 7f858410 0052834c
As a final action, i will try to dump a bit of code.
I just hope that this won't crash.
00527738: 00 00 82 90 00 1e 02 00 03 1e 03 00 04 00 60 04 00 00 00 00 00 00 a2 ac 08 00 e0 03 01 00 02 24 (end)
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</OpenHDF>
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von gemelli ()