V3.0
- update original recovery image to FS v1.08.01 FS 90xEU Mar 23 2010
- remove not used bootargs with set default bootargs
- add if port < 1024, abort upload and restart upload again (to get a higher port number)
- add fix for crc-check fault, forse Tftp packages size to 512. ( this is default for the uboot when packes size is not acknowledged)

Note: Use the forse Tftp packages size to 512 when you get the "CRC check Failed" message.

V2.8
- hide non used bootargs

V2.7
- add Maxi U-boot Rev1.0 for AT7000

V2.6
- add Maxi U-boot Rev0.8 for AT7000 (needed for original FW 097)
- update original recovery image to FS v1.07.97 FS 90xEU Mar 09 2010
- add wait time after usb reset

V2.5a
- add read current reseller-id
- update ART for 700 (same as ART 7000)

V2.5
- add change reseller-id
- change original recovery image back to FS v1.07.89 FS 90xEU Feb 3 2010
- update original recovery image to FS v1.07.94 FS 90xEU Feb 26 2010

V2.4a
- fix for crc failed when maxiuboot installed (first try AT7000)

V2.4
- add new Maxi U-boot Rev 0.7 with dimming Display (AT700)

V2.3
- fix bug with empty lines in custombootargs.txt

V2.2
- add load recovery image, Maxi Uboot, Original Uboot from USB devices
- add save bootargs to disk
- add custom bootargs file (use your own bootargs as default)
- add custom bootargs editor
- add "S-USB1", "S-USB2", etc... selection as boot device.



Download in der Database

Erstmal auf Save bootargs und danach kannst du die auch editieren.