Yes in webinfo I get that window with Loadbalancer 0 but not find that in oscam.config. In webinfo should I leave that at 0 or go to 1(fastest reader). Anyway at lb @ 0 I still get 1st group C line fast and rest quite slow

In #5959 oscam.conf there is no lb_mode.Should I put that line manually? # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn build #5959 # Read more: streamboard.gmc.to/svn/oscam/t…on/doc/txt/oscam.conf.txt [global] logfile = /dev/tty disablelog = 1 nice = -10 maxlogsize = 32 waitforcards = 0 preferlocalcards = 1 saveinithistory = 1 [monitor] hideclient_to = 15 appendchaninfo = 0 #[cccam] #port = 12000 #reshare = 3 #version = 2.0.11 #reshare_mode = 1 [dvbapi] enabled = 1 …

So for oscam.user for #5959 [account] user = local pwd = local group = 1,2,3,4,5,6 au = sky betatunnel = 1833.FFFF:1702 Did this with no result. Group1 gets in quickly the others after a long wait

Yes sorry it is from oscam.user In oscam server I gave each c line a group number but in oscam.user I cannot figure out how to put in group numbers

Googi need help again Now using oscam #5959 which runs quite well but is fast on first C line. The #5959 oscam.server is different : [account] user = local pwd = local group = 1,2 au = sky betatunnel = 1833.FFFF:1702 How should I put group numbering in this?

My oscam.user is like this: [account] user = dvbapiau pwd = group = 1,2,3,4,5,6 uniq = 3 au = 1 betatunnel = 1833.FFFF:1702 cccstealth = 0 [account] user = usermonitor pwd = pasword group = 1,2,3,4,5,6, uniq = 1 monlevel = 4 Is this correct? Don't think so

Reporting back on this issue. Managed to run Oscam with my C lines. I put in oscam.server in var/keys/oscam/ the following 5 Clines: [reader] label = cccam_server enable = 1 protocol = cccam device = server.hostname.ext,serverport account = username password = password cccversion = 2.0.11 cccmaxhops = 3 group = 1 inactivitytimeout = 1 reconnecttimeout = 30 [reader] label = cccam_server 2 enable = 1 protocol = cccam device = server.hostname.ext,serverport account = username password = password cc…

Does this mean that prio.cfg is not really giving any priorities?

I am using ccam coming with HDF-Teamimage v1.2 I have noticed that Nova gr channels are slow to open. Using Dreambox and ccam.prio is zapping is very fast so it is not a server problem. Is prio.cfg coming with this Image really working ? In Dreambox in ccam.cfg it has CAID PRIO FILE : /var/etc/CCcam.prio not in HDF though In ccam.cfg Nova gr priority is this: P: 0604:000000 prio.cfg has different setup and cannot figure out if Nova is there. Guess is I:......? Any help please ?

Nothing!! I give up. I will stay with ccam

It is Nova gr and same channel you saw in that log clears as soon as I switch to ccam

No I tried those configs before and not worked. Try again. Nothing stored in log files!! Below from Status, I masked server configs 2012/03/24 9:15:15 569408 c dvbapiau (0604&000000/0145/3C:FFFC): rejected group (0 ms) (0 of 0) (no matching reader) 2012/03/24 9:16:07 561D70 p tcp_conn_close(): fd=8, cl->typ == 'p' is_udp 0 label == 'cccam_reader' 2012/03/24 9:16:07 561D70 p tcp_conn_close(): fd=0, cl->typ == 'p' is_udp 0 label == 'cccam_reader' 2012/03/24 9:16:07 561D70 p creating thread for dev…

In webinterface Readers/Choose edit Description-Blank Enable-Yes Device- IP/Port Group-1 LOadbalance weight-100 All rest -Blank Reader specific settings for protocol cccam User- user Passwd- passwd Version-2.0.11 Maxhop-10 Mindown-1 Reshare- -1 Want Emu- blank Reconnect timeout- 7986488 Keepalive- yes SAVE If anything done wrong please tell me

Started OscamEmu ymod and again through webinterface put my C line configs and reboot: Log file: # oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t20 build #0 # Read more: streamboard.gmc.to/oscam/brows…on/doc/txt/oscam.user.txt [account] user = dvbapiau pwd = group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 uniq = 3 au = 1 betatunnel = 1833.FFFF:1702 cccmaxhops = 15 cccreshare = 15 cccignorereshare = 1 [account] user = usermonitor pwd = pasword group = …

OscamEmu ymod has its files in var/keys/oscam_emu and Oscam120 in var/keys/oscam I have started OscamEmu ymod rebooted Amiko opened webinfo and put in server IP/port and user/passwd and clicked enable. Then again rebooted and even gone by ftp to var/keys/oscam_emu/oscam.server and see that my configs are there. In webinfo I see it recognizes my server and tries to connect but fails.To make absolutely sure it is not a case of mixing up oscams I try the other oscam without changing server file. Al…

In Configuration/global/logging both values set to 0-enabled no file was set usr file so I put oscam.log then save ,reboot but no file created in var/log. I have worked with newcamd, mgcamd,ccamd for years with no problems but oscam seems to be out of league!!

No it does not run.I just put what you posted and deleted all else.Even webinfo does not connect anymore. Tried to go here usrfile = /var/log/oscam/oscamuser.log to see the log but this file does not exist. Is it an oscam not installed properly thing? In spark but with a bit different set up in oscam.reader (user/psswd in 1 line) it works Any more ideas? Thanks for support

Here are the the files from var/keys/oscam_emu: I have masked in red my settings oscam.conf: # oscam.conf generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t19 build #0 # Read more: streamboard.gmc.to/oscam/brows…on/doc/txt/oscam.conf.txt [global] logfile = /dev/null disablelog = 1 unlockparental = 1 nice = -1 maxlogsize = 0 preferlocalcards = 1 saveinithistory = 1 lb_mode = 1 lb_retrylimit = 1600 [monitor] port = 16500 nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168…

In webinfo in status it shows server and its IP but not connecting giving error. In files : File does not exist or no file selected! But if I ftp to oscam server I see the settings I also see in webinfo/readers/ccam_reader/edit the server settings

Ok Deleted all settings I had previously put by ftp in oscam.readers. Went into webinterface and put in ccam.sever.1 my hostIP/port and my user/passwd ticked on enable but again not connected. Can we please have an idiot guide for this?