Zitat von AMWAW: „Habe ich mir eine Box für 350€ gekauft um die ab sofort mit einem veralteten Image zu betreiben ???“ That's all I can say!

Easy,User-Friendly setup from scratch My brother in law can do it,everyone else can too HDF! You saved me

Zitat von Nobsy: „Hi lemi, i have cable. The problem is, that the card has expired and must be re-activated. Before that, I also had no problems with doscam.“ Hi Nobsy. My oscam server file Quellcode (12 Zeilen) You need to call your provider and ask for "freischaltung"! Quellcode (18 Zeilen) Edit: I'm glad it works now

I'm confused here a little bit Do you have cable or satellite?? I have UM cable and KBW v23 card from sky!! No problems with oscam or doscam.

Zitat von Schoof: „da das Gewinnspiel schon geschlossen wurde openHDF Wetek Gewinnspiel Aktion Juli Woche 2 lass ich hier mal dampf ab. Habt Ihr mal geschaut, wieviele Leute nur 1 oder 2 Beiträge haben? Dann schaut euch mal das Reg.Datum an.... na kommt es? Natürlich Gewinnt dann auch noch so ein 1 Beitrag und extra neu reg. Typ. Nur so als Tipp: Bei solchen Gweinnspielen sollte man ein mind Beitag xx haben und mind paar Wochen/Monate im Forum sein. Viel Spass 5ive7even, oder wie immer Du noch h…

69144MB

I will accept the offer only if I can load HDF image to the box

Same here.No problem on my LX2 or GigaBlue with build 106. I have OMB on Atemio 6200. Egami-info button OK , OpenPli OK , OpenATV OK , OpenHDF build-98 OK build-106 not OK No big deal,just wanna make a feedback on build-106 Edit: Now you can say:"Wenn man den Wald vor lauter Bäumen nicht mehr sieht" ... All the time tried,Info button in hotkey, sett to "show event info" instead "show event view" What's the difference,beats me It's all good now

Zitat von Googgi: „1. press red button long for hotkey-menu 2. then press INFO button 3. now choose > epg > "show event view" 4. save and exit “ That is the problem!Like I wrote in the first post.Nothing happens after assigning info button in hotkey-menu.Besides,Info should work without hotkey setup.

I want to see event info.That's the purpose of "info button". By pressing info I got "Stop sign" on screen,so no assignment for it. Thanks

Just flashed my atemio with HDF build 106.... Everything works fine,except info button on RC! Tried to set it up in "Hot-Key",nothing happens... Any clue PS No same problem with other images.

Thanks Googgi! What else can be? I use same card,cam's and config's.....GigaBlue read card and LX not

No new drivers from Xpeed LX?? It's the only receiver that doesn't read my I12 card GBUE,GBSE and Triplex=Card OK Doscam or Oscam,irdeto or nagra modus Xpeed LX2 I12=Failed to activate card,KBW=card OK,UM02=card OK I can't think of other problem then drivers??!!

Testing is my second name

Let it boot E2 and do update or online flash in ATV menu.Maybe that can fix it FP buttons.

Zitat von DarkEvil: „Now i want to go to Spark mode but the receiver with power back off, then power back on with the OK buttom the receiver continue to loading Enigma boot.“ Have you followed instructions? -Power OFF your receiver using the Main Power Switch at the rear panel -Press and hold the OK button on the front panel, and power on the receiver -When FORC appears on the display, release the OK button and press and release the CH+ (UP) button. SPAR should appear on the display -Press and r…

Thanks.It's not bad at all.Default skin is missing some future....Replaced with KravenSE and is all good now

It looks like really cheap China made receiver. No pun intended

Zitat von pixbox: „lösche bzw deinstalliere dein vorherige CustomSubservices, oder benutze nur die subservices.xml diese kommt nach /etc/enigma2 Das Plugin im RAR ist verlinkt auf eine subservices.xml direkt im Pluginverzeichnis“ Already did it!! Finally subservices working on BULI HD.Thank you so much!!

I do have UM!Thanks!!