Sure it is good to know...... but what to do? Can somebody, please, explain me what pin number means? Should 0000 be changed to something else? hdfreaks.cc/index.php/Attachment/21400/

I think I have found the cause of not working DVB-T tuner. Somehow, but inserted CAM module does not allow terrestrial tuner to work. For example, if I turn on some terrestrial channel and it does not show anything, then I remove CAM module and picture immediately appears on the screen. CAM module is for Tricolor TV and it is assigned to specific services. hdfreaks.cc/index.php/Attachment/21399/

At ~ 3AM I got an e-mail from GB. They say the issue of the bitrate is solved! I like this care of customer support! Dear Rimants, we solved Videobitrate problem please install bitrate (2.0) plugin from plugin server activate the plugin if you retrieve infopannel You will see Videobirate on the screen I have tested with teamblueimage running synonymous with hd_glas16 skin Our business strategy is satisfied customers if you are satisfied with us recommend us we are very happy with that Mit freund…

Similarly as for bitrate issue I asked GigaBlue to check signal level problem. And they answered: Dear Mr. Rimants, we have already been busy for the signal strength we have seen this problem, it is due to Platform of BCM we have already contacted BCM about it With the new platform this problem should be eliminated. Because of videobitrate this morning I was looking for errors because of videobitrate, our driver should be adapted to PLI It will not take long, I think next week will be done. It i…

I wrote an e-mail to the GigaBlue, and look what they answered! Dear, Thank you for your mail and for choosing Gigablue We will take care of this problem and fix it at the next driver update We apologize for this little problem. please give us time, I think in a week will be fixed If you have further complaints please write us we will take care of it Mit freundlichen Grüßen - Best Regards Fikret Kosar / CEO Sound promising!

Same problem with any other skin. Here it will always stay at 94% hdfreaks.cc/index.php/Attachment/21366/

Hi! I have discovered that signal level reading (in yellow box) is not working correctly. Digits are not changing at all. When channel is turned on than it takes some data and stays forever, does not matter how long you look at that and what are the weather conditions outside. In case of channel on the screenshot it is always dB15.17 and 94%. On other receivers those 2 digits are always change their data. SO, I suspect that something is not working correctly here. Or..... it is my fault ..... no…

As far as I know this is only problem of GigaBlue, all other E2 receivers show videobitrate correctly. This is my third GB Quad, and all previous also did not show any sign of videobitrate.

I've tried to tune multiboot but did not succeed - the box did not want to boot. Of course it is my fault. Then I installed ATV image and DVB-T channels worked right away hdfreaks.cc/index.php/Attachment/21354/ . Then I reinstalled HDF image and DVB-T is working just as it should hdfreaks.cc/index.php/Attachment/21356/ . Then I've installed Bitrate plugin, and, as you see from the screenshot, there is no videobitrate readings. So, my question is: Can that be fixed someway? Or it is problematic?

Zitat von zeini: „You can install 4 images on your box.“ You mean some kind of multiboot? I am not sure I know how to do it properly. But, I can try to make full back-up of the existing image and keep it in case I screw something up. Will do that tomorrow.

I've tried several images like VIX, OpenATV and also original which came with the box. I have my /etc/tuxbox/terrestrial.xml file saved all the times and insert it into any new image. Basically, all the terrestrial channels are in the box, but they do not show even there are in my favorite list. hdfreaks.cc/index.php/Attachment/21350/ I am pretty sure if I reinstall other image then reception of terrestrial channels will not be an issue.

I have also done automatic scan (several times). It goes pretty fast till it reaches 530 MHz, then it slows down. But at the end finds nothing anyway. On other images I was able to use DVB-T tuner. Maybe is is good idea to re-install the image? hdfreaks.cc/index.php/Attachment/21348/hdfreaks.cc/index.php/Attachment/21349/

hdfreaks.cc/index.php/Attachment/21347/I have tried exactly the same settings but it did not work.

We have DVB-T, but in Reception Settins Tuner configuration there is only DVB-T2 and DVB-C available to choose from hdfreaks.cc/index.php/Attachment/21344/

Thanks @zeini, I will be more careful creating threads. No, in the drop-down menu there is no Riga,Latvia available. I used user defined frequency to scan and also automatic, but tuner does not find any channels. In Riga there are only 7 frequencies in DVB-T (Chan/freq) 28 / 530, 29 / 530, 31 / 554, 43 / 650, 45 / 666, 48 / 690, 59 / 778, 66 / 834. So, when I manually enter one of those channels there is a lock on built-in Signal finder, but after scanning, no channels are available. hdfreaks.cc…

Hello dear forumers! Sorry for writing English, but German is completely not my native, hoverer English as well not my mother tongue. About week ago I purchased GB Quad UHD receiver and started to look for best image for it. And I finally stopped on the HDF. I like it a lot, because it is easy and logical built. Thanks to people who made this image! I had no issues installing CAM CI+ module which works perfectly with downloaded from imafe-feed autopin plugin. I only got couple of issues: - I can…