OK, now I remember why I stopped using EMC and the other similar project, Valerie, whatsitsname? Scanning of my equipment lasts forever.... Especially EMC, since it scans each of various E2 folders ad nauseam... Bad idea or bad configuration of mine?

Much obliged. Btw, on Sparkfans you didn't behave this way... I wonder why... Back to the topic... The image looks good, albeit slightly slower with changing channels than most E2s for SH4. There is a reverse situation with HDMU, which is fast initially but slows down significantly after a while... I have no idea why HDMU slows down after some time so much that when you give a command you have to wait a noticeable amount of time until it reacts and it even gets worse sometimes... Something might…

Testing slowly... PKT Blue Panel > Actualisations > FW was OK and restarted but BluePanel update gave me GSOD the first time, successfully updated the second time (3.1.22, if memory serves). Crashlog attached...

Zitat von bonkel: „next image is HDMU dvd with menus :)“ Good, thanx!

Heh, once again, as per usual, you just have to spoil things... Oh, boy...Zitat von Googgi: „EMC is a movie-player-plugin! which problem do you have with it?“ Obviously. I simply haven't yet tried it in this image (no time yet). Hence the question. Zitat von Googgi: „Spark-boxes has an sh4-core builtin. xp1000 has mipsel. You cannot compare completly different Hardware and also different Images. ;)“ Not so quickly! You can and you should compare them! Actually, you must compare STBs in the same …

OK, point by point... Zitat von Googgi: „1) EMC (Enhanced Movie Center) is installed, press PLAY to start.“ Does it use MP or MC or DVDp? If it does, can you see the problem? Zitat von Googgi: „2) again: DVD is not working! wether in HDMU or in PKT.“ I noticed this in other images, too, in Python 2.7. However, 2.6 is working fine, at least in my Ferrari but also, interestingly enough, in my XP1000 with AAF (2.7) image. Zitat von Googgi: „render your DVDs into mpg, then you can play it.“ Sorry bu…

Indeed. So: 1) Media Player is "not available", at my end, in this installation. Is that as it should be or this part of installation went wrong? 2) Media Centre gets stuck with any DVDs I tried. (We are talking either DVD folder as such or video-ts folders or if one must start a VOB file.) 3) DVD Player simply couldn't start my DVD folders/files. 2 and 3 went into a loop, as I said, so I had to restart it at the back. But the image itself is well thought through! I mounted my USB HDD and USB me…

Huh, look at the time... really must go to bed but... However, I must say one or two things before I finally turn in, at the break of dawn - it was a botched installation (the first one but no wonder, as the image is huge, being a backup, so it lasts and lasts and lasts), sorry... or should I say "I'm happy to report it was a botched first installation"... This installation, on the other hand, has "No Media Player available" (is this by design or another botched installation?). But "Media Centre…

Btw, I forgot to credit Mohousch for his greatness and knowing how to talk "details", too! I think all people who know what they can do - who do not feel threatened at the first question - can simply talk facts and not get on the defensive from the start, which is soooo telling of those who are not that self-assured... To my mind, we should all try to be critically minded, so we get the best possible results in the end. Arselicking just doesn't do this, you see... I tested for many of the greate…

Brinfried, I am always very weary of people who want to (so blatantly) "endear themselves to the community", like you are doing now... rather shamelessly... "They" should think about possible pain in the butt tomorrow, I think... Oldie, m8: I simply play stuff from shared folders, using the MC, MP or DVD Player in E2. Sadly, none of it worked. But maybe it was a botched installation... Anyway, I prefer verifiable type of evidence, as you know, so I do another installation and happily report bac…

1) I asked, I did not claim. Therefore, 2) do not jump to conclusions! 3) That is rather silly and/or childish! 4) The way to respond is the way some authors respond (not the tribal bunch). Facts. See mui4tler's down to the facts response and learn, kids! Also DBoxOldie's capacity to talk facts and try to help or at least he gets the feedback and that's it. (I will install it again, for author's sake, retrace all my steps and report back.) 4a) Btw, if I make a mistake I apologise immediately, as…

What are you talking about? It works in general with any other OS, except with this one, since my parameters are the same. If anyone has a problem with himself it's the one mentioning it... This is too low to... Achhh... forget you....

Sorry to have to say this but... Although the whole thing looks really nice and it's loaded with stuff (tools and so on) - lots of it doesn't work... Starting with Media Centre, Media Player and DVD Player - they don't do almost anything, streaming from my NFS NAS or from anywhere... Did you guys test it in that sense, before publishing? Anybody else with such experience?

OK, here you are: Quellcode (34 Zeilen) Tried accessing my NFS shared folders from my NAS but mounted via fstab, as nothing else works: Quellcode (31 Zeilen)

So, let's see what have I missed the first time...? I asked last time:Zitat: „P.S. Any chance of fstab syntax to mount NFS and CIFS shared folders that way, please? “ And the response was:Zitat: „i think this not the right way to get network devices mounted, better is to use automount as far neutrino network mount manager can't do this correctlly @DBO: is automount built in the image? “ I do not see it. And even if it was I would have preferred a good device manager. Imagine, for instance, 2 par…

OK, second installation from scratch - just to make sure... - now, let's see... Really good and fast opening a channel with various OSCams.... This time it worked for a while on HD channels (Primafila) before it crashed (Shutdown or reboot). But once it started crashing - real problems on $ly IT, sadly... But I think it is my main peer, who is possibly doing some work on his server... Sometimes stuck on HRT2, for no reason, as other HRT channels are fine. Reboots seem to screw up some thing occa…

Why the SHUTDOWNS when trying to get into the channel list, guys? Exit menu and sometimes once OK, sometimes twice OK = SHUTDOWN... Similarly on $ly IT HD channels > SHUTDOWN... What's with that: is it the keys mapping or something else? Very quirky and annoying! Can we have some displayed ECM data in the skin, please?

Thanx, m8! Zitat von DrStoned: „Perhaps this might help with your mount problems. Neutrino-martiiGit-by-FFTeam,HFD-31-10-2012 I use it in a NHD2-Image with automount.“ I believe this is the best format for Synology: Quellcode (1 Zeile) For Windows7 CIFS, sharing without username/password: Quellcode (1 Zeile) It just works in NHD2!

Thanx for the link/help, Thomas! That's appreciated. HND2 is way better than MP, for sure, as it is not restricted in that silly manner, from tuner onwards! MOUNTING VIA HOME NETWORK: This morning I played with fstab mounting. It didn't work with nfs, at first. Then, I added /volume1 (before the shared folder itself) and rebooted. WORKS LIKE A CHARM!!! That's much better than via Neutrino's folder mounting, I assure you - which needs looking into... AUDIO-VISUAL PART: Passthrough gives great res…

I do beg your pardon! My mistake. Well, not mistake but power outage. It resets the Home Theatre connections to something other than Sat TV/Cable and then, because it is all connected with HDMI cables, one doesn't get an image... Reflashing now, having chosen the correct input, sorry again...