Hello I wonder if anybody could submit drivers for this tuner and the procedure to install them. Thanks

Thanks Yes, any searching option. Will try new realease and revert. Bye

Hello A software problem popup comes in when selecting any option of service searching. Logs attached. Thanks for any advice.

Yes, I did so. However the issue comes strange, and does not occur in other boxes, 4k or not...

Hello All italian HD channels appear with multiple squares and audio is irregular, no matter which CI setting is made . Grateful for help.

And nobody else has DM 900 to test?

Skin default. 1080i Yes yes

Even changing miniscreen settings in EMC, box must be set to standby and restarted to go back to full screen. Nobody faces this issue?

I solved by 1. flash an old image (tried different ones) 2. flash the latest one. Don't know why. Thanks to all of you.

[quote = 'Koivo', 'https: //www.hdfreaks.cc/index.php/Thread/29057-Spinner-running-endless/?postID=226875 # post226875'] I can see a few differences at first glance , He has an EMU installed and you have not and therefore probably old settings / backups recorded. He does not talk about symlinks. He does not use WiFi at his box. Does the access to the other box in the LAN work normally? I have some drives from the NAS on the HD51 mounted and no problems with access via LAN. [/ Quote] I do use wif…

The seekbar issue regards DM900 only. Will try another flash. For Mutant51 the issue is the endless running of the spinner, which persists in spite of fresh flashes.

No the seekbar was working (don't remember when exactly), and is very useful to go to a far point in long recordings. I know well how to activate it (long left/right buttons, sorry my mistake), but it doen't even appear on the screen. Because of this issue and other I reported about Mutant 51, I am using different images which work perfect.

No the seekbar was working, and it is very useful to go to a far point in long recordings. I know very well how to activate seekbar, by long right/left, but it is not appearing on screen anymore.

Hello Seekbar does not appear using <> buttons. Does anybody else face this issue? Help appreciated

I'm frustrated. I will flash another image (openESI is working great).

I swear I flashed latest HDF fresh by usb. I don't know why cccam should give problems: it is installed on DM900, Gblue quad 4k and Octagon SF4008 without problem Will try with an earlier image and send feedback. Thanks

Attached last log. Hope it is of help. Thanks

HDF image 6.4 /17.01.2019, but same issue under 6.2, 6.3, Open ATV 6.3, 6.2, skins always original

Hi The issue occurs under various functions, such as accessing the record list, and if negative, opening a recordedfile and so on. Rebooting, fresh flashing or changing hdd does not help. Help appreciated

Fortunately, I have few recordings, and I can move them to another hdd. However, first I will try to load the latest image by usb and see if the issue reproduces. Thanks