Thanks, but this is for another box

Actually no such problem with Open ATV...

Hi Both LAN cable and WiFi adapter were connected. Although WiFi settings were good, I found that changing the wifi adapter the issues have vanished. Also, the old adapter caused interference with another box, so it clearly went faulty these last days. It was an annoying but useful experience about wifi dongles! Thanks to you all!

Sorry, the box stops booting at some 50% loading, so i cannot make a screenshot for now. I will do after flashing another image.

All settings are OK, as confirmed by the network provider; line is fiber FTTH. Software update still takes over 25 minutes, only DM900 and pc being connected. Restarting router doesn't help. No such problem with other boxes running same last HDF 6.5 version (hitube, Gblue quad 4k, SF4008). I also tried a fresh flash, but issues remain, especially endless restart. Will try earlier 6.5 version, otherwise old 6.4. Will send feedback. Thanks

Not really often, but some of my favourite IPTV channels are visible by exte3 player only. Thanks

No definite solution foreseen?

Hello I installed and reinstalled service app, but actually it disappears after 1st setting, while keeps appearing in list of system plugins. New install and going back to initial setting causes sw problem and box rebooting>no service app in menu again. Log attached

In the meantime I tried "fix OpenHDF Version info", the restart issue is solved, don't know this is casual. Package list update still takes long instead. However , how can I check if DNS settings are OK?

Hi Both functions take minutes to complete. Help appreciated. thanks

Flashed the bolt, but after rebooting spinner keeps running: no access to menu. Repeated flashing recovery image w/out success, even with USB stick connected to rear hub. Will try with another image

Hello I tried flashing recovery image 6.5 with 2 different USB sticks both formatted FAT32, but I keep having 2 problems: 1. Although Astra 19.2E is selected besides Hotbird, scanning Astra always fails, 0 channels found, no matter automatic or manual scan is selected; 2. The spinner runs endlessly when selecting software management 3. I cannot go back to 6.4 version by USB flashing . Help appreciated Thanks

Hello crash on starting > loading data... Logs attached of Mutant 51 and SF4008

Hi I found that no PIP is available, under both version 6.5 and 6.4. It is automatically found instead on other receivers like DM900, Gblue and others. Any hints?

Hello No audio in video file from striscialanotizia.mediaset.it/…7-maggio-2021_72521.shtml and next episodes. This applies to all my boxes running OpenHDF (Gblue UHD quad 4k, Mutant HD51, Dreambox DM900, Xtrend ET10000), while not if running OpenATV. The same file was loaded to different USB sticks, but with the same problem. Any ideas? Thanks

Is there good news about image 6.5?

How can I change command set?

Zitat von cricriat: „Use different remote controls for boxes with overlapping commands. “ Of course I do ....

Zitat von hjl1234: „Use dreamdroid or webif. “ Dreamdroid seems to be usable with android devices: I don't like android at all. How to use webif to solve the problem?

Hello I found that the box turns on when another box (Vu + 4kse) is activated. Also, switching among functions occurs due to RC commands of other boxes. Placing the boxes far from each other doesn't always help, due to limited (but large) space of the room. Is there a way to remedy? Thanks for anybody's help.