log?

HDplus is active, this is the wrong reader.

Set only Tivusat-Reader active

Go into webinterface from Oscam. You get webinterface if you put in the IP-address of your box in your PC browser and set the port to 8080.
For example your box have IP 192.168.1.10, than write
192.168.1.10:8080
in browser and webinterface of box will be opened. Here you can change reader. After change reader you must start Oscam again.

Have you read carefully my post before?

You can also download cccam 232 in downloader of HDF Toolbox.

What is the IP-adress from your box?

http://192.168.1.135:8080
With this link you reach the Oscam-Webinterface
Under "Readers" you see all predefined Readers, enable Tivusat-Reader with 1-click far left, then it should work.

I think you dont have started Oscam in Softcammanager

Oscam is working, all is fine.

You dont need the old cccam.
It is already available, test it.