Bluetooth-Tastatur - Treiber

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Bluetooth-Tastatur - Treiber

    Hallo zusammen,

    ich wollte meine Bluetooth-Tastatur "GeneralKeys 3in1-Bluetooth-Tastatur mit Maus-Touchpad & Laserpointer" nutzen.
    Der Dongle hängt hinten am USB, wird aber nicht erkannt.
    Welche Treiber müsste ich installieren?

    dmesg bringt:

    10.138462] Bluetooth: Core ver 2.22
    [ 10.142175] NET: Registered protocol family 31
    [ 10.146658] Bluetooth: HCI device and connection manager initialized
    [ 10.153068] Bluetooth: HCI socket layer initialized
    [ 10.157985] Bluetooth: L2CAP socket layer initialized
    [ 10.163085] Bluetooth: SCO socket layer initialized
    [ 10.177374] usbcore: registered new interface driver btusb
    [ 10.214357] usbcore: registered new interface driver cdc_acm
    [ 10.220141] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [ 10.351272] EXT4-fs (mmcblk0p5): re-mounted. Opts: data=ordered
    [ 11.313997] random: crng init done
    [ 12.256928] Bluetooth: hci0 command 0x1001 tx timeout
    [ 14.304595] Bluetooth: hci0 command 0x1009 tx timeout
    [ 18.734615] NET: Registered protocol family 10
    [ 18.739872] Segment Routing with IPv6
    [ 18.915580] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [ 18.924921] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
    1. AX HD51 (HDF 6.5, HDF 6.4)
    2. Atemio Nemesis (HDF 6.5)
    3. Golden Instar Xpeed LX2 (HDF 6.3)
  • Ja habe ich, es werden aber keine Geräte gefunden.


    [ 21.528922] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 23.358249] Bluetooth: Core ver 2.22
    [ 23.361993] NET: Registered protocol family 31
    [ 23.366495] Bluetooth: HCI device and connection manager initialized
    [ 23.372914] Bluetooth: HCI socket layer initialized
    [ 23.377848] Bluetooth: L2CAP socket layer initialized
    [ 23.382974] Bluetooth: SCO socket layer initialized
    [ 24.240624] usb 1-1.3: device not accepting address 5, error -110
    [ 24.327648] usb 1-1.3: new full-speed USB device number 6 using ehci-brcm
    [ 25.522556] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 25.538768] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 25.553320] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 25.583980] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 29.623089] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 29.641662] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 29.655006] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 29.673300] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 29.744640] usb 1-1.3: device descriptor read/64, error -110
    [ 42.787300] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 42.804665] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 42.822879] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 42.841168] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 45.615614] usb 1-1.3: device descriptor read/64, error -110
    [ 45.804608] usb 1-1.3: new full-speed USB device number 7 using ehci-brcm
    [ 51.247608] usb 1-1.3: device descriptor read/64, error -110
    [ 67.119603] usb 1-1.3: device descriptor read/64, error -110
    [ 67.232722] usb 1-1-port3: unable to enumerate USB device
    [ 914.189177] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    1. AX HD51 (HDF 6.5, HDF 6.4)
    2. Atemio Nemesis (HDF 6.5)
    3. Golden Instar Xpeed LX2 (HDF 6.3)
  • Hänge mich hier ran. Meine Logitech K400+ scheint auch nicht auf. Wobei wenn ich auf Suchen geht steht nach einer viertel Sekunde sofort nichts gefunden. Oben steht wie in einer dauerschleife Scanning for devices. Mein Handy wird auch nicht erkannt.
  • Telnet sagt mir nichts. Mit dmesg findet er zwar meine Logitech bzw sehe ich denn Logitech Eintrag paar mal nur wenn ich was mache zB beim Mousepad so kommt kein Zeiger, wenn ich wo Tippe geschieht nichts. Nur im BT Devicemanager ist nichts als wenn der nicht funktionieren würde.

    Edit: habe das mal mit Telnet gemacht und installiert. Teste dann etwas später.

    Ok dürfte funktionieren nur das Mousepad will nicht. Pfeiltasten gehen aber. Im Geräte Manager aber weiter nur HDD zu sehen und bei Tastatur scheint auch nichts auf.

    Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Hater ()

  • Danke damdam,
    mit "opkg install packagegroup-base-bluetooth" hat es funktioniert.
    Aber erst als ich nicht den ersten USB-Port genommen habe, sondern den zweiten am dem bei mir ein USB-Hub (mit Stromversorgung) hängt.
    Dort ist jetzt Dongle drin - und natürlich war ein neustart notwendig.

    demesg (2-3x gekoppelt)

    [ 10.097991] Bluetooth: Core ver 2.22
    [ 10.101639] NET: Registered protocol family 31
    [ 10.106101] Bluetooth: HCI device and connection manager initialized
    [ 10.112484] Bluetooth: HCI socket layer initialized
    [ 10.117426] Bluetooth: L2CAP socket layer initialized
    [ 10.122558] Bluetooth: SCO socket layer initialized
    [ 10.137915] usbcore: registered new interface driver btusb
    [ 10.260564] EXT4-fs (mmcblk0p5): re-mounted. Opts: data=ordered
    [ 11.212541] random: crng init done
    [ 18.668620] NET: Registered protocol family 10
    [ 18.673796] Segment Routing with IPv6
    [ 18.846943] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [ 18.856321] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
    [ 18.863562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 21.717014] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
    [ 21.725250] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 25.849624] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 25.855027] Bluetooth: BNEP filters: protocol multicast
    [ 25.860296] Bluetooth: BNEP socket layer initialized
    [ 27.935090] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 27.958066] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 27.975080] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 27.994449] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 28.391649] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 28.409101] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 28.421829] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 28.436412] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 31.908684] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 31.926601] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 31.942592] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 31.962113] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 32.014726] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 32.043530] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 32.058166] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 32.077963] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 45.070823] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 45.089113] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 45.105659] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 45.129491] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
    [ 63.858839] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [ 63.864841] Bluetooth: HIDP socket layer initialized
    [ 83.928513] hid-generic 0005:0A5C:8502.0001: unknown main item tag 0x0
    [ 83.935602] input: Broadcom Bluetooth Wireless Keyboard as /devices/platform/f0470500.ehci/usb2/2-1/2-1.4/2-1.4:1.0/bluetooth/hci0/hci0:0/0005:0A5C:8502.0001/input/input4
    [ 83.967233] hid-generic 0005:0A5C:8502.0001: input,hidraw0: BLUETOOTH HID v1.1b Keyboard [Broadcom Bluetooth Wireless Keyboard ] on 00:1f:81:00:08:30
    [ 462.827276] hid-generic 0005:0A5C:8502.0002: unknown main item tag 0x0
    [ 462.834380] input: Broadcom Bluetooth Wireless Keyboard as /devices/platform/f0470500.ehci/usb2/2-1/2-1.4/2-1.4:1.0/bluetooth/hci0/hci0:0/0005:0A5C:8502.0002/input/input5
    [ 462.861865] hid-generic 0005:0A5C:8502.0002: input,hidraw0: BLUETOOTH HID v1.1b Keyboard [Broadcom Bluetooth Wireless Keyboard ] on 00:1f:81:00:08:30
    root@ax51:~#
    1. AX HD51 (HDF 6.5, HDF 6.4)
    2. Atemio Nemesis (HDF 6.5)
    3. Golden Instar Xpeed LX2 (HDF 6.3)
  • xobd schrieb:

    Danke damdam,
    mit "opkg install packagegroup-base-bluetooth" hat es funktioniert.
    Aber erst als ich nicht den ersten USB-Port genommen habe, sondern den zweiten am dem bei mir ein USB-Hub (mit Stromversorgung) hängt.
    Dort ist jetzt Dongle drin - und natürlich war ein neustart notwendig.


    Hi, meinst du mit 2tem Port den USB 3.0 er Port?...Das wäre schlecht, hier würde ich gern meine externe USB 3.0 Platte anstecken u. den Receiver als Mini NAS nutzen.
  • Habe nun sowohl das paket packagegroup-base-bluetooth als auch das plugin btdevicemanager installiert.
    Box neugestartet, alle USB Ports durchprobiert, leider scheinen im Bluetooth Manager keine Geräte auf.

    Nun hab ich einfach nochmal das bt paket per telnet installiert, nicht über die paketverwaltung und bekomme:
    packagegroup-base-bluetooth: unsatisfied recommendation for kernel-module-l2cap
    packagegroup-base-bluetooth: unsatisfied recommendation for kernel-module-sco

    Kann mir wer weiterhelfen, wie ich diese kernel module draufbekomm? Einfach opkg install kernel-module-l2cap oder kernel-module-sco funktioniert nicht.
    BT Stick steckt am hinteren USB 2.0 Port, hier der Output von dmseg:
    pastebin.com/FC9YccPW

Unsere Partnerboards

^
Flag Counter