VDR Nightly Build: 0.1.0 version Enigma 2 für alle CubeRevo

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • VDR Nightly Build: 0.1.0 version Enigma 2 für alle CubeRevo

      VDR Nightly Build: 0.1.0 version Enigma 2


      VDR for all Cuberevo-digital (old DGStation named) products:
      - cuberevo-100hd
      - cuberevo-mini-fta (cuberevo-200hd)
      - cuberevo-250hd (ipbox-91hd)
      - cuberevo-mini (ipbox-900hd)
      - cuberevo-mini2 (ipbox-910hd, cuberevo-3000hd, madtek-3000hd)
      - cuberevo-2000hd
      - cuberevo-9500hd (cuberevo-7000hd)
      - cuberevo (ipbox-9000hd rel1 and rel2)

      Coder: Tideglo

      First boot take a little bit much more than a normal boot, so wait until you can see the bandeau bar (the one with infos on current channel) on the tv screen.

      ---------
      HISTORY:
      ---------

      release 0.1.0(beta)
      *********************
      This is the first public release, it's released as a beta version, probably it has many and many bugs, but to fix and to discover them I need all your help, so I decided to make it public smile
      Bootargs are the same as the ones used on Enigma2, so good luck!
      Currently a lot of things must be done, but it is just made public for fun.
      - based on VDR 1.7.15 (last development version)
      - LOT OF BUGS! Have fun and...

      Enjoy it! Tideglo

      -------------------------------------------------------------
      ABOUT VDR for cuberevo family receivers:
      -------------------------------------------------------------

      This is an adaption of VDR for the DGStation's High Definition boxes.

      I want to thank these people:
      Team DuckTales: for helping me on finding really many bugs and to helping me on make VDR like it is now.
      SIFTeam: this is my place, with all my friends that i like really to chat with!!!! (I LOVE YOU GUYS)

      Regards, Tideglo

      ----------------
      HOW TO INSTALL:
      ----------------

      To test this VDR image you need a running nfs server and a serial & network
      connection to the receiver.

      You need uboot 1.3.1 or higher to run e2 (never tested with lower versions)

      Do this only if you want to use nfs-server otherwise go to point 3:
      1. extract the tgz file on the server and set the directory in /etc/exports
      for example:
      /root/Desktop/root 192.168.1.0/255.255.255.0(rw,no_root_squash,sync,no_subtree_check)

      where 192.168.1.0 is your net base-address and 255.255.255.0 is your netmask

      2. restart nfs server

      3. connect via serial console with an hyperterminal connection to the receiver (I suggest you to use putty, it's freeware, and configure it to use a 115200 serial connection)

      4. turn on the receiver and hit ctr+z in serial console
      you should see the following prompt:

      cuberevo>

      5. customize the following settings to your network environment and type them into the
      serial console:

      setenv menu_1 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/nfs nfsroot=/root/Desktop/root rw rootpath=/root/Desktop/root ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit";setenv bootcmd "nfs a5ff0000 192.168.1.6:/root/Desktop/root/boot/uImage;bootm a5ff0000";saveenv;boot'

      setenv menu_2 'setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootusb";saveenv;boot'

      setenv menu_3 'setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";setenv bootcmd "run bootusb";saveenv;boot'

      setenv menu_4 'setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 quiet";setenv bootcmd "bootm a0060000";saveenv;boot'

      saveenv

      remember to customize where /root/Desktop/root is the directory you added to /etc/exports and ipaddr is the ip of your decoder, serverip is the ip of your nfs-server, gateway is your gateway ip, netmask is the mask of your home-net

      6. now you can restart your decoder and press the relative remote controller's button for 5 seconds to start the image you want:

      Press Button 1: start your image using nfs-server
      Press Button 2: start your image using usb pendrive if you don't have a SATA hdd
      Press Button 3: start your image using usb pendrive if you have a SATA hdd
      Press Button 4: start your original flash image in the decoder (DGStation's original firmwares and images based on them)

      That operation is necessary only the first time you want to change your boot commands. You don't need to press all the time you reboot the decoder a button to select wich image to start, simply do that only if you want to change to e2 nfs from usb, or from original images.

      That's all, Tideglo

      Zu finden im PartnerBoard CubeRevo-Digital

    Unsere Partnerboards

    ^
    Flag Counter