I do seem to have network transfer speed issue with LX3. What kind of speeds others are getting with it?
LX3 over gbit network with NFS:
Alles anzeigen
To the same server but with other machine, so server not limiting write throughput
Alles anzeigen
LX3 over gbit network with NFS:
Quellcode
- Results for write throughput:
- 97.612 Mbit/s with udp,async,wsize=8192
- 97.612 Mbit/s with tcp,async,wsize=8192
- 97.612 Mbit/s with tcp,async,wsize=32768
- 97.612 Mbit/s with tcp,async,wsize=16384
- 89.478 Mbit/s with udp,async,wsize=4096
- 89.478 Mbit/s with udp,async,wsize=16384
- 89.478 Mbit/s with tcp,async,wsize=4096
- 42.949 Mbit/s with udp,async,wsize=32768
- Results for read throughput:
- 1073.741 Mbit/s with udp,async,rsize=8192
- 1073.741 Mbit/s with udp,async,rsize=32768
- 1073.741 Mbit/s with udp,async,rsize=16384
- 1073.741 Mbit/s with tcp,async,rsize=8192
- 1073.741 Mbit/s with tcp,async,rsize=4096
- 1073.741 Mbit/s with tcp,async,rsize=32768
- 1073.741 Mbit/s with tcp,async,rsize=16384
To the same server but with other machine, so server not limiting write throughput
Quellcode
- root@xpeedlx3:~# ethtool eth0
- Settings for eth0:
- Supported ports: [ TP MII ]
- Supported link modes: 10baseT/Half 10baseT/Full
- 100baseT/Half 100baseT/Full
- 1000baseT/Half 1000baseT/Full
- Supported pause frame use: No
- Supports auto-negotiation: Yes
- Advertised link modes: 10baseT/Half 10baseT/Full
- 100baseT/Half 100baseT/Full
- 1000baseT/Full
- Advertised pause frame use: Symmetric
- Advertised auto-negotiation: Yes
- Link partner advertised link modes: 10baseT/Half 10baseT/Full
- 100baseT/Half 100baseT/Full
- 1000baseT/Half 1000baseT/Full
- Link partner advertised pause frame use: Symmetric Receive-only
- Link partner advertised auto-negotiation: Yes
- Speed: 1000Mb/s
- Duplex: Full
- Port: MII
- PHYAD: 4
- Transceiver: internal
- Auto-negotiation: on
- Supports Wake-on: ags
- Wake-on: d
- SecureOn password: 00:00:00:00:00:00
- Link detected: yes