Oscam FastMode unter Axas e3hd

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

      Oscam FastMode unter Axas e3hd

      Hallo Leute,

      hab eine Axas e3hd, dieser fungiert als Server. Da die Zugriffzeiten etwas über 500ms waren, habe ich Fastmode aktiviert. Sofern ich mehrmals Oscam neustarte, bekomme ich Werte unter 100ms angezeigt und es wird hell. Nach einigen Stunden jedoch Freezer und Zeiten über 5000ms.

      Sofern beim Starten Fastmode nicht funktioniert, bekomme ich folgenden Log:

      Quellcode

      1. (reader) G02 [videoguard2] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
      2. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      3. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1D0D PMTPID 0060 (NO MATCHING READER)
      4. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      5. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1D0D PMTPID 0060 (NO MATCHING READER)
      6. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      7. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1D0D PMTPID 0060 (NO MATCHING READER)
      8. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      9. (dvbapi) Demuxer 0 impossible to descramb



      Als Oscam habe ich die Version "oscam-1.20-unstable_svn-r11209" und die Karte ist eine G02 (nds).

      Unterstützt die Axas e3hd generell Fastmode?
      schade, anscheinend ist der Fastmode tatsächlich nicht kompatibel, habe auch ältere Oscam-Versionen verwendet, Ergebnis bleibt identisch.

      Eine letzte Frage:
      Habe nun Fastmode deaktiviert, nun läuft alles prima, jedoch im Log wird folgendes ausgegeben:

      Quellcode

      1. (reader) G02 [videoguard2] cardreader_do_ecm: after csystem->do_ecm rc=1
      2. (reader) G02 [videoguard2] cardreader_do_ecm: ret rc=1
      3. (reader) G02 [videoguard2] cardreader_process_ecm: cardreader_do_ecm returned rc=1 (ERROR=0)
      4. (reader) G02 [videoguard2] ecm hash: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX real time: 511 ms
      5. (ecm) local (09C7@000000/068E/0081/96:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:0F06000000:): found (495 ms) by G02
      6. (reader) G02 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
      7. (reader) G02 [videoguard2] write to cardreader


      Was hat der Error zu bedeuten?
      hi pixbox und googgi,

      danke für die Tipps. @pixbox: 50% der Oscam-Neustarts geht schief, bzw. Oscam meldet folgenden Log und wird nicht hell (unter WebIF-Status ist "NEEDINIT (no entitlements)" zu entnehmen:

      Quellcode

      1. (reader) G02 [internal] found card system videoguard2
      2. (reader) G02 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
      3. (reader) G02 [videoguard2] card detected
      4. (reader) G02 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
      5. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      6. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      7. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      8. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      9. (reader) G02 [videoguard2] Deactivating card
      10. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      11. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      12. (reader) G02 [videoguard2] creating thread for device /dev/sci0
      13. (reader) G02 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
      14. (reader) G02 [videoguard2] Reader sci internal, detected box type: e3h3
      15. (reader) G02 [videoguard2] card detected
      16. (reader) G02 [videoguard2] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
      17. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      18. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      19. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      20. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      21. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      22. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      23. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      24. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      25. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      26. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      27. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      28. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      29. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      30. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      31. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      32. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      33. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      34. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      35. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      36. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      37. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      38. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      39. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      40. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      41. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      42. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      43. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      44. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      45. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      46. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      47. (reader) G02 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
      48. (reader) G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
      49. (reader) G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
      50. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      51. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      52. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      53. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      54. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      55. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      56. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      57. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      58. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      59. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      60. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      61. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      62. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      63. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      64. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      65. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      66. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      67. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      68. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      69. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      70. (reader) G02 [internal] Buffers readed 0 bytes total time_us 4999475
      71. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      72. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      73. (reader) G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possiblehz specified reader->mhz)
      74. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      75. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 062 (NO MATCHING READER)
      76. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      77. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA MTPID 0062 (NO MATCHING READER)
      78. (reader) G02 [internal] passed history check
      79. (reader) G02 [internal] type: VideoGuard Kabel Deutschland G02/G09 (09C7), baseyear: 2004
      80. (reader) G02 [internal] write to cardreader
      81. (reader) D0 74 01 80 01
      82. (reader) G02 [internal] Answer from cardreader:
      83. (reader) B4 90 00
      84. (reader) G02 [internal] write to cardreader
      85. (reader) D0 74 01 00 B4
      86. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      87. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      88. (reader) G02 [internal] Answer from cardreader:

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von „bang2013“ ()

      poste mal den reader in deiner oscam.server

      Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
      das macht mich stutzig
      Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
      Konfuzius
      [reader]:

      Quellcode

      1. label = G02
      2. protocol = internal
      3. device = /dev/sci0
      4. caid = 09C7
      5. boxid = 12345678
      6. detect = cd
      7. ins7e11 = 13
      8. mhz = 100
      9. cardmhz = 2700
      10. group = 1
      11. emmcache = 1,1,2,0
      12. blockemm-g = 1


      ... und unter Web-IF > Readerconfig > G02 ist das Häckchen "Autospeed: Sets mhz according to atr for smargo readers and dreambox internal readers. Default is checked" gesetzt, also aktiviert.
      label = G02
      protocol = internal
      device = /dev/sci0
      caid = 09C7
      boxid = 12345678
      detect = cd
      ins7e11 = 13
      mhz = 100
      #cardmhz = 2700
      group = 1
      emmcache = 1,1,2,0
      blockemm-g = 1

      probiere mal so
      Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
      Konfuzius
      keine Verbesserung, es geht mal und öfters nicht, nach Neustarts:

      Quellcode

      1. (reader) G02 [internal] Answer from cardreader:
      2. (reader) 2B 05 11 12 13 14 15 90 00
      3. (reader) G02 [internal] write to cardreader
      4. (reader) D0 7E 11 00 01 13
      5. (reader) G02 [internal] Answer from cardreader:
      6. (reader) 90 00
      7. (reader) G02 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 13
      8. (reader) G02 [internal] found card system videoguard2
      9. (reader) G02 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
      10. (reader) G02 [videoguard2] card detected
      11. (reader) G02 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
      12. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      13. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      14. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      15. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      16. (reader) G02 [videoguard2] Deactivating card
      17. (reader) G02 [videoguard2] creating thread for device /dev/sci0
      18. (reader) G02 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
      19. (reader) G02 [videoguard2] Reader sci internal, detected box type: e3h3
      20. (reader) G02 [videoguard2] card detected
      21. (reader) G02 [videoguard2] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
      22. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      23. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      24. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
      25. (reader) G02 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
      26. (reader) G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
      27. (reader) G02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
      28. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
      29. (dvbapi) Demuxer 0 impossible to descramble PID 1 CAID 09C7 PROVID 000000 ECMPID 1DBA PMTPID 0062 (NO MATCHING READER)
      sieht so aus als ob der Axas Reader kein FastMode kann

      hier nochmals eine oscam.server Einstellung aus der VU Smartcard Wiki

      [reader]
      label = KDG0x
      protocol = internal
      device = /dev/sci0
      group = 1
      emmcache = 1,1,2
      autospeed = 1
      Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
      Konfuzius
      Hi pixbox,

      seit gestern, ca. 20 Stunden läuft die Box mit der u.g. Oscam-Konfig ohne Freezer.

      Quellcode

      1. [reader]
      2. label = G02
      3. protocol = internal
      4. device = /dev/sci0
      5. caid = 09C7
      6. boxid = 12345678
      7. detect = cd
      8. ins7e11 = 13
      9. mhz = 100
      10. #cardmhz = 2700
      11. group = 1
      12. emmcache = 1,1,2,0
      13. blockemm-g = 1


      Eine letzte Frage, mein Server (oscam.conf: user = local; oscam.user: user=local) soll die Karte mit EMMs füttern, damit die Karte nicht deaktiviert wird. Welche Konfigeinstellungen muss ich tätigen und wo stelle ich fest, dass es klappt. Die Clients würde ich außen vor lassen.
      Aktuell steht bei ECM (unter WebIF>readers>G02): OK: 6887 (99,99%).
      Bei EMM steht: written-UQ: 1 und skipped-UQ: 15.
      mit neueren oscam geht es so

      Quellcode

      1. [reader]
      2. label = G02
      3. protocol = internal
      4. device = /dev/sci0
      5. caid = 09C7
      6. boxid = 12345678
      7. detect = cd
      8. ins7e11 = 15
      9. group = 1
      10. emmcache = 1,1,2,0
      1x Triplex alter Sattuner + dvb-C/T --- 2x Triplex neuer Sattuner + Dvb-C/T2 --- LX 2 1 Sat+ Dvb-C/T2 --- 4x Dbox1 --- 2x Pace --- 1x GM990 reloaded 1x Pingulux (alte)
      Servus,

      @thomas66: habe die Konfig geändert, leider klappt es nicht "NEEDINIT (no entitlements)", LOG wie folgt:

      Quellcode

      1. reader) G02fast [videoguard2] creating thread for device /dev/sci0
      2. (reader) G02fast [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
      3. (reader) G02fast [videoguard2] Reader sci internal, detected box type: e3h3
      4. (reader) G02fast [videoguard2] card detected
      5. (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 3 disabled ecmpids!
      6. 2016/02/25 10:10:48 12F604E8 c (dvbapi) Demuxer 0 impossible to descramble PID 2 CAID 09C7 PROVID 000000 ECMPID 1C72 PMTPID 0063 (NO MATCHING READER)


      Sofern ins7e11 = 13, dann antowrtet mal der Cardreader, aber erst nach mehrmaligem Neustarten. Wenn es auch mal läuft, dann bricht es nach einigen Stunden ab. Hier der LOG, wenn er nachdem Starten mit Fastmode=11 nicht funktioniert:

      Quellcode

      1. (main) System name = Linux
      2. (main) Host name = axase3
      3. (main) Release = 3.18.24
      4. (main) Version = #2 Fri Jan 1 23:23:20 CET 2016
      5. (main) Machine = mips
      6. (main) Stb model = dm800se
      7. (main) Stb boxtype = e3h3
      8. (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5898
      9. (config) userdb reloaded: 9 accounts loaded, 0 expired, 0 disabled
      10. (main) signal handling initialized
      11. (config) 912 provid's loaded
      12. (config) 240 service-id's loaded in 8 ms
      13. (config) 61 tier-id's loaded
      14. (net) newcamd: initialized (fd=5, port=12005)
      15. (net) -> CAID: 09C7 PROVID: 000000
      16. (net) cccam: initialized (fd=6, port=12000)
      17. (reader) G02fast [internal] creating thread for device /dev/sci0
      18. (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
      19. (main) waiting for local card init
      20. (reader) G02fast [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
      21. (reader) G02fast [internal] Reader sci internal, detected box type: e3h3
      22. (webif) webif: decompressed 157913 bytes back into 380664 bytes
      23. (webif) HTTP Server running. ip=0.0.0.0 port=12002
      24. (reader) G02fast [internal] card detected
      25. (reader) G02fast [internal] ATR: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
      26. (reader) G02fast [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
      27. (reader) G02fast [internal] Calculated work ETU is 74.40 us reader mhz = 500
      28. (reader) G02fast [internal] Buffers readed 0 bytes total time_us 4999508
      29. (reader) G02fast [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
      30. (reader) G02fast [internal] Card type: KLTV
      31. (reader) G02fast [internal] Rom version: 10LM
      32. (reader) G02fast [internal] Credit available on card: 0 euro
      33. (reader) G02fast [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 13
      34. (reader) G02fast [internal] found card system videoguard2
      35. (reader) G02fast [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
      36. (reader) G02fast [videoguard2] card detected
      37. (reader) G02fast [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
      38. (reader) G02fast [videoguard2] Deactivating card
      39. (reader) G02fast [videoguard2] creating thread for device /dev/sci0
      40. (reader) G02fast [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
      41. (reader) G02fast [videoguard2] Reader sci internal, detected box type: e3h3
      42. (reader) G02fast [videoguard2] card detected
      43. (main) init for all local cards done
      44. (emmcache) loaded 1 emmcache records from /tmp/.oscam/oscam.emmcache in 2 ms
      45. (emmcache) loaded 1 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
      46. (anticasc) anti cascading disabled
      47. (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
      48. (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
      49. (dvbapi) Demuxer 0 ecmpid 0 CAID: 1722 ECM_PID: 1672 PROVID: 000000
      50. (dvbapi) Demuxer 0 ecmpid 1 CAID: 1834 ECM_PID: 1D72 PROVID: 000000
      51. (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C7 ECM_PID: 1C72 PROVID: 000000
      52. (dvbapi) Demuxer 0 ecmpid 3 CAID: 1861 ECM_PID: 1972 PROVID: 000000
      53. (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 0)
      54. (dvbapi) Demuxer 0 stream Videostream (MPEG-2)(type: 02 pid: 03ff length: 0)
      55. 2016/02/25 10:20:21 12F604E8 c (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 0400 length: 0)
      56. (dvbapi) Demuxer 0 stream Audiostream (MPEG-1)(type: 03 pid: 0401 length: 0)
      57. (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in caPMT
      58. (dvbapi) Demuxer 0 serving srvid 0024 (1722@000000:0024 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0063
      59. (dvbapi) Demuxer 0 impossible to descramble PID 2 CAID 09C7 PROVID 000000 ECMPID 1C72 PMTPID 0063 (NO MATCHING READER)
      60. (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!



      Hast du mit Fastmode mit deiner Axas e3hd definitiv am laufen? Falls ja, kannst du mir evtl. die Version deines Oscam mitteilen? Auf meiner Box habe ich "oscam-1.20-unstable_svn-r11209".

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von „bang2013“ ()

      x211 aktuelle Version

      mit fastmode 15 muss das gehn -der findet die in dem er maximal 2 versuche macht und fertig
      man darf dann nicht sinnlos reader an aus machen
      lass den mal nach erkennung so laufen

      du kannst den auch - sollte Treiber wacklin sein so machen

      beide mhz auf 357 dann save dann restart
      oder beide 368
      1x Triplex alter Sattuner + dvb-C/T --- 2x Triplex neuer Sattuner + Dvb-C/T2 --- LX 2 1 Sat+ Dvb-C/T2 --- 4x Dbox1 --- 2x Pace --- 1x GM990 reloaded 1x Pingulux (alte)

    Unsere Partnerboards

    MOSC
    Flag Counter