5.3 ist Online

Googgi · 21. November 2015, 14:58

Meinst die Einstellungen der Bild-Optimierungen?

Was dir am besten gefällt im 5.3 wirst ausprobieren müssen.

Die Treiber sind ja nicht vergleichbar.

(mobil gesendet)

orka75 · 21. November 2015, 15:23

Ja dachte an die Einstellungen die in dieser vorhanden sind.Sollte nicht soviel spielen sonst gibt's es Ärger, kann ich nur machen wenn Regierung nicht da ist.Muss ich wohl mal hier alle Einstellungen Screenshots machen und dann Schritt für Schritt in die 5.3 einpflegen in der Hoffnung das vom Bild her dann dieser sehr nahe kommt

Gesendet von meinem C6903 mit Tapatalk

Yue23 · 22. November 2015, 21:59

Guten Nabend,
gibt es eine Möglichkeit das Update 5.3 zumachen ohne das man alles neu machen muss?
Ja Klar Einstellungen und Co sichern aber ich meine einfach auf ein USB Stick Kopieren Update fertig.

Danke euch schon mal.

Googgi · 22. November 2015, 22:24

Wenn du jetzt kein 5.3 drauf hast musst du neu flashen

(mobil gesendet)

dniestre · 25. November 2015, 12:52

When i try to open the OpenHDF-Downloader menu the box crashes.

regards

Googgi · 25. November 2015, 20:18

deactivate Animation-Setup on your VU+, this causes the crash.

dniestre · 25. November 2015, 23:06

Under system - animation setup - animations are disabled. And the problem still there.

regards

Koivo · 26. November 2015, 05:23

Remove the plugin. You can also delete the folder with a ftp client.
What do you want to do with this plugin? Your box is a litte vu solo.

Googgi · 26. November 2015, 07:29

Koivo schrieb:

Your box is a litte vu solo.

ähmm > solose

dniestre · 26. November 2015, 09:17

I just want to disable the animations and for that i need to install the plugin, right?

Googgi · 26. November 2015, 11:36

Yes, this is VU+ like

(mobil gesendet)

dniestre · 26. November 2015, 13:57

So what is the solution?

Koivo · 26. November 2015, 14:52

Remove the Plugin to use Downloader. You can installiert it again after this.
Please try it.

dniestre · 26. November 2015, 19:11

I have deleted the animation plugin and the downloader worked fine. When i have installed the plugin again the downloader fails. In the previous version of the OpenHDF image everything was working fine. There is something wrong.

regards

Koivo · 26. November 2015, 19:21

There is not any change in the downloader plugin. It must be a problem with fucking animation plugin.

nean · 27. November 2015, 11:27

hi,

gibts aktuell nachvollziehbare dependency issues im repo?
irgendwas hat mir da inkonsistenzen in gstreamer eingebracht,...

Quellcode

root@et10000:~# /media/usb/bin/update.sh
####################################################################################################
CHECK UPDATES,...
####################################################################################################
Downloading http://feeds.hdfreaks.cc/V5.3/3rdparty/Packages.gz.
Inflating http://feeds.hdfreaks.cc/V5.3/3rdparty/Packages.gz.
Updated list of available packages in /var/lib/opkg/openhdf-3rdparty.
Downloading http://feeds.hdfreaks.cc/V5.3/all/Packages.gz.
Inflating http://feeds.hdfreaks.cc/V5.3/all/Packages.gz.
Updated list of available packages in /var/lib/opkg/openhdf-all.
Downloading http://feeds.hdfreaks.cc/V5.3/et10000/Packages.gz.
Inflating http://feeds.hdfreaks.cc/V5.3/et10000/Packages.gz.
Updated list of available packages in /var/lib/opkg/openhdf-et10000.
Downloading http://feeds.hdfreaks.cc/V5.3/et10000_3rdparty/Packages.gz.
Inflating http://feeds.hdfreaks.cc/V5.3/et10000_3rdparty/Packages.gz.
Updated list of available packages in /var/lib/opkg/openhdf-et10000_3rdparty.
Downloading http://feeds.hdfreaks.cc/V5.3/mips32el/Packages.gz.
Inflating http://feeds.hdfreaks.cc/V5.3/mips32el/Packages.gz.
Updated list of available packages in /var/lib/opkg/openhdf-mips32el.
####################################################################################################
LIST UPDATES,...
####################################################################################################
Not selecting libgstapp-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstmpegts-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstaudio-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstrtp-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstpbutils-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstvideo-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstriff-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstcodecparsers-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstadaptivedemux-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting gstreamer1.0 1.6.0 as installing it would break existing dependencies.
Not selecting libgsttag-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstsdp-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgsturidownloader-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstrtsp-1.0-0 1.6.0 as installing it would break existing dependencies.
####################################################################################################
opkg upgrade
Do you wish to upgrade? (y/n)

Alles anzeigen

eigenartig weil die packages scheinen am neuesten stand zu seinN
zb:

Quellcode

root@et10000:~# opkg status gstreamer1.0
Package: gstreamer1.0
Version: 1.6.1-r0
Depends: libglib-2.0-0 (>= 2.44.1), libffi6 (>= 3.2.1), libz1 (>= 1.2.8), libc6 (>= 2.21)
Status: install ok installed
Architecture: mips32el
Installed-Time: 1448621019

Quellcode

root@et10000:~# cat /etc/image-version
box_type=et10000
build_type=0
version=82-20151125
build=82
date=20151125091838
comment=HDFreaks
target=9
creator=OpenHDF
url=http://www.hdfreaks.cc
catalog=http://www.hdfreaks.cc

Alles anzeigen

pfuh, da is was faul,...

Quellcode

root@et10000:~# opkg --force-depends install libgstapp-1.0-0 libgstmpegts-1.0-0 libgstaudio-1.0-0 libgstrtp-1.0-0 libgstpbutils-1.0-0 libgstvideo-1.0-0 li
bgstriff-1.0-0 libgstcodecparsers-1.0-0 libgstadaptivedemux-1.0-0 gstreamer1.0 libgsttag-1.0-0 libgstsdp-1.0-0 libgsturidownloader-1.0-0 libgstrtsp-1.0-0
Package libgstapp-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstmpegts-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstaudio-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstrtp-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstpbutils-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstvideo-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstriff-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstcodecparsers-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstadaptivedemux-1.0-0 (1.6.1-r0) installed in root is up to date.
Package gstreamer1.0 (1.6.1-r0) installed in root is up to date.
Package libgsttag-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstsdp-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgsturidownloader-1.0-0 (1.6.1-r0) installed in root is up to date.
Package libgstrtsp-1.0-0 (1.6.1-r0) installed in root is up to date.
root@et10000:~#
root@et10000:~# opkg upgrade
Not selecting libgstapp-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstmpegts-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstaudio-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstrtp-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstpbutils-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstvideo-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstriff-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstcodecparsers-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstadaptivedemux-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting gstreamer1.0 1.6.0 as installing it would break existing dependencies.
Not selecting libgsttag-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstsdp-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgsturidownloader-1.0-0 1.6.0 as installing it would break existing dependencies.
Not selecting libgstrtsp-1.0-0 1.6.0 as installing it would break existing dependencies.

Alles anzeigen

nean · 27. November 2015, 12:51

SOLVED:

1.)
force reinstall um aktuellen stand vom repo auf der box zu haben:

Quellcode

opkg --force-depends --force-reinstall install libgstapp-1.0-0 libgstmpegts-1.0-0 libgstaudio-1.0-0 libgstrtp-1.0-0 libgstpbutils-1.0-0 libgstvideo-1.0-0 libgstriff-1.0-0 libgstcodecparsers-1.0-0 libgstadaptivedemux-1.0-0 gstreamer1.0 libgsttag-1.0-0 libgstsdp-1.0-0 libgsturidownloader-1.0-0 libgstrtsp-1.0-0

2.)
gesund flaggen:

Quellcode

opkg flag ok libgstapp-1.0-0 libgstmpegts-1.0-0 libgstaudio-1.0-0 libgstrtp-1.0-0 libgstpbutils-1.0-0 libgstvideo-1.0-0 libgstriff-1.0-0 libgstcodecparsers-1.0-0 libgstadaptivedemux-1.0-0 gstreamer1.0 libgsttag-1.0-0 libgstsdp-1.0-0 libgsturidownloader-1.0-0 libgstrtsp-1.0-0

3.)
lokale db säubern -> ACHTUNG: man sollte unbedingt wissen was man da tut, sonst wars das mit den pakage manager, im ernstfall kann man keine pakete mehr installieren, dh. ein backup dieses files ist angebracht, und zwar bevor man loslegt.

im opkg status file sieht man duplikate einträge, da man zuvor schon alle neuesten pakete im force modus drüber-installiert hat, kann man aus dem status file den alten ramsch rauslöschen:

vi /var/lib/opkg/status

zb: libgstadaptivedemux-1.0-0

ALTE VERSION 1.6.0-r0 -> kompletten Block löschen, da eine neuer Block entweder darüber oder darunter existiert, gutes auge ist gefragt!

Quellcode

Package: libgstadaptivedemux-1.0-0
Version: 1.6.0-r0
Depends: libgsturidownloader-1.0-0 (>= 1.6.0), libffi6 (>= 3.2.1), libgstapp-1.0-0 (>= 1.6.0), libc6 (>= 2.21), libglib-2.0-0 (>= 2.44.1), gstreamer1.0 (>= 1.6.0)
Provides: libgstadaptivedemux-1.0
Status: install ok not-installed
Architecture: mips32el
Installed-Time: 1445975717
Auto-Installed: yes

NEUE/AKTUELLE VERSION 1.6.1-r0 -> DO NOT TOUCH, finger weg,

Quellcode

Package: libgstadaptivedemux-1.0-0
Version: 1.6.1-r0
Depends: libgsturidownloader-1.0-0 (>= 1.6.1), libffi6 (>= 3.2.1), libgstapp-1.0-0 (>= 1.6.1), libc6 (>= 2.21), libglib-2.0-0 (>= 2.44.1), gstreamer1.0 (>= 1.6.1)
Provides: libgstadaptivedemux-1.0
Status: install user installed
Architecture: mips32el
Installed-Time: 1448621021
Auto-Installed: yes

sorry, for the spam

Koivo · 27. November 2015, 21:58

Oder den opkg fix in der Toolbox ausführen.

nean · 27. November 2015, 22:54

stimmt gerade gesehen,...

Quellcode

find /var/lib/opkg/status -type f -exec sed -i 's/Version: 1.6.0-r0/Version: 1.6.1-r0/' {} \;

..., dachte es gibt was das weniger brutal ist,...

Koivo · 28. November 2015, 05:00

Ja neu flashen mit Wiederherstellung der Einstellungen.

5.3 ist Online

Koivo schrieb:

Quellcode

Quellcode

Quellcode

Quellcode

Quellcode

Quellcode

Quellcode

Quellcode

Quellcode

Teilen

Ähnliche Themen

Unsere Partnerboards