DOSCAM funktioniert nicht mehr

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Hier auch noch meine doscam.log:
      Spoiler anzeigen
      ​-------------------------------------------------------------------------------
      >> DOSCam << started at Fri Jul 17 13:30:23 2015
      -------------------------------------------------------------------------------
      2015/07/17 13:30:23 0 s >> DOSCam << started, V0.25 (mipsel-unknown-linux-gnu-libusb)
      2015/07/17 13:30:23 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 539
      2015/07/17 13:30:23 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
      2015/07/17 13:30:23 0 s signal handling initialized
      2015/07/17 13:30:23 0 s monitor: initialized (fd=5, port=988)
      2015/07/17 13:30:23 0 s cccam (used for zeroconf): initialized (fd=6, port=21526)
      2015/07/17 13:30:23 0 s Slot1 [internal] creating thread for device /dev/sci0
      2015/07/17 13:30:23 0 s Slot2 [internal] creating thread for device /dev/sci1
      2015/07/17 13:30:23 0 s keyfile [constcw] creating thread for device /usr/keys/SoftCam.Key
      2015/07/17 13:30:23 0 s loadbalancer: can't read from file /tmp/.doscam/stat
      2015/07/17 13:30:23 0 s waiting for local card init
      2015/07/17 13:30:23 53CFA0 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/17 13:30:23 53CFA0 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/17 13:30:23 532520 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
      2015/07/17 13:30:23 53EB28 p EMU init failed - Keyfile not found!
      2015/07/17 13:30:23 76900468 h webif: decompressed 50154 bytes back into 144440 bytes
      2015/07/17 13:30:23 76900468 h HTTP Server running. ip=0.0.0.0 port=8080
      2015/07/17 13:31:23 53CFA0 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/17 13:31:23 53CFA0 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/17 13:31:30 532520 r Slot1 [internal] card detected
      2015/07/17 13:31:31 532520 r Slot1 [internal] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00
      2015/07/17 13:31:31 532520 r Slot1 [internal] Init card protocol T0, FI=1, F=372, D=8, N=3
      2015/07/17 13:31:31 532520 r Slot1 [internal] Calculated work ETU is 9.30 us
      2015/07/17 13:31:31 532520 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
      2015/07/17 13:31:32 532520 r Slot1 [internal] Card type: KWPE
      2015/07/17 13:31:32 532520 r Slot1 [internal] Rom version: 10T1
      2015/07/17 13:31:32 532520 r Slot1 [internal] No TA1 change for this card is possible by ins7E11
      2015/07/17 13:31:32 532520 r Slot1 [internal] parental lock setting: FF FF FF FF
      2015/07/17 13:31:32 532520 r Slot1 [internal] parental lock disabled
      2015/07/17 13:31:32 532520 r Slot1 [internal] parental lock setting after disabling: FF FF FF FF
      2015/07/17 13:31:32 532520 r Slot1 [internal] type: VideoGuard Kabel BW (098E), caid: 098E
      2015/07/17 13:31:32 532520 r Slot1 [internal] serial: ########, BoxID: ########, baseyear: 2004
      2015/07/17 13:31:32 532520 r Slot1 [internal] ready for requests
      2015/07/17 13:31:32 532520 r Slot1 [internal] found card system videoguard2
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] card detected
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] type: VideoGuard Kabel BW (098E)
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 007b, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 007d, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 0081, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 008e, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00ac, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00ad, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00ae, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00af, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00c0, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00c1, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00f3, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:31:32 532520 r Slot1 [videoguard2] tier: 00ff, expiry date: 2015/07/04-01:00:00
      2015/07/17 13:32:23 53CFA0 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/17 13:37:23 0 s init for all local cards done
      2015/07/17 13:37:23 0 s anti cascading disabled
      2015/07/17 13:37:23 542078 c plain dvbapi-client granted (DVBApi, au=on (5 reader))
      2015/07/17 13:37:23 542078 c Detected /dev/dvb/adapter0/demux0 Api: 0
      2015/07/17 13:37:23 542078 c [ADD PID 0] CAID: 1850 ECM_PID: 195C PROVID: 000000
      2015/07/17 13:37:23 542078 c [ADD PID 1] CAID: 1838 ECM_PID: 1C5C PROVID: 000000
      2015/07/17 13:37:23 542078 c [ADD PID 2] CAID: 098E ECM_PID: 1E5C PROVID: 000000
      2015/07/17 13:37:23 542078 c Found 3 ECMpids and 3 STREAMpids in PMT
      2015/07/17 13:37:23 542078 c New program number: 006C (1850:006C unknown) [pmt_list_management 3]
      2015/07/17 13:37:24 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:37:24 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:B0C9): not found (170 ms) by Slot1
      2015/07/17 13:37:33 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:37:33 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:F6AA): not found (132 ms) by Slot1
      2015/07/17 13:37:33 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:F6AA): not found (0 ms) by Slot1
      2015/07/17 13:37:43 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:37:43 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:B4F1): not found (117 ms) by Slot1
      2015/07/17 13:37:43 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:B4F1): not found (1 ms) by Slot1
      2015/07/17 13:37:48 542078 c Slot1 [videoguard2] Successfully added EMM to /var/tuxbox/config/Slot1_emm.log
      2015/07/17 13:37:48 542078 c Slot1 [videoguard2] Successfully added binary EMM to /var/tuxbox/config/Slot1_emm.bin
      2015/07/17 13:37:48 542078 c Slot1 [videoguard2] DVBApi emmtype=unique, len=45, idx=0, cnt=1: blocked (0 ms)
      2015/07/17 13:37:53 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:37:53 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:C7C0): not found (115 ms) by Slot1
      2015/07/17 13:37:53 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:C7C0): not found (0 ms) by Slot1
      2015/07/17 13:38:03 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:38:03 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:1655): not found (115 ms) by Slot1
      2015/07/17 13:38:03 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:1655): not found (0 ms) by Slot1
      2015/07/17 13:38:13 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:38:13 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:CA63): not found (116 ms) by Slot1
      2015/07/17 13:38:13 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:CA63): not found (0 ms) by Slot1
      2015/07/17 13:38:23 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:38:23 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:72EE): not found (115 ms) by Slot1
      2015/07/17 13:38:23 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:72EE): not found (0 ms) by Slot1
      2015/07/17 13:38:33 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:38:33 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:EF74): not found (115 ms) by Slot1
      2015/07/17 13:38:33 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:EF74): not found (0 ms) by Slot1
      2015/07/17 13:38:43 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:38:43 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:8FD3): not found (117 ms) by Slot1
      2015/07/17 13:38:43 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:8FD3): not found (0 ms) by Slot1
      2015/07/17 13:38:53 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:38:53 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:8A8E): not found (115 ms) by Slot1
      2015/07/17 13:38:53 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:8A8E): not found (0 ms) by Slot1
      2015/07/17 13:39:03 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      2015/07/17 13:39:03 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:2245): not found (115 ms) by Slot1
      2015/07/17 13:39:03 542078 c DVBApi (098E&000000/1E5C/0000/006C/9D:2245): not found (0 ms) by Slot1
      2015/07/17 13:39:05 542078 c Slot1 [videoguard2] Successfully added EMM to /var/tuxbox/config/Slot1_emm.log
      2015/07/17 13:39:05 542078 c Slot1 [videoguard2] Successfully added binary EMM to /var/tuxbox/config/Slot1_emm.bin
      2015/07/17 13:39:05 542078 c Slot1 [videoguard2] DVBApi emmtype=unique, len=91, idx=0, cnt=2: blocked (0 ms)
      2015/07/17 13:39:13 532520 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
      by Slot1
    • 2015/07/17 13:37:48 542078 c Slot1 [videoguard2] Successfully added EMM to /var/tuxbox/config/Slot1_emm.log
      2015/07/17 13:37:48 542078 c Slot1 [videoguard2] Successfully added binary EMM to /var/tuxbox/config/Slot1_emm.bin

      jetzt schreibt er aber was /var/tuxbox/config/Slot1_emm.log

      Soweit mir bekannt ist, wird bei KabelBW noch nicht gepairt, also kannst du auch beim Slot1 Reader den block löschen bzw abschalten

      [reader]
      label = Slot1
      protocol = internal
      device = /dev/sci0
      group = 1
      emmcache = 1,1,10
      #blockemm-u = 1
      saveemm-u = 1


      Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
      Konfuzius
    • wie ich oben schon geschrieben habe ist z.Z. nichts bekannst das bei KabelBW Karten gepairt werden, deshalb gibts dafür keine Liste wie bei der V13/14.
      Mach den Blocker aus wie in diesen Posting beschrieben und warte bis hell wird
      Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
      Konfuzius
    • Nobsy schrieb:

      Hi lemi, i have cable. The problem is, that the card has expired and must be re-activated. Before that, I also had no problems with doscam.
      Hi Nobsy.
      My oscam server file

      Quellcode

      1. [reader]
      2. label = kabelbw
      3. enable = 1
      4. protocol = internal
      5. device = /dev/sci0
      6. caid = 098E
      7. boxid = 12345678
      8. detect = cd
      9. mhz = 500
      10. cardmhz = 357
      11. group = 1
      12. emmcache = 1,1,2
      Alles anzeigen

      You need to call your provider and ask for "freischaltung"!

      Quellcode

      1. Die Freischaltfunktion kann Ihnen in folgenden Fällen helfen:
      2. Sie haben längere Zeit kein Digital TV geschaut, z. B. weil Sie im
      3. Urlaub waren, und benötigen deshalb eine neue Freischaltung. Unser Tipp:
      4. Den Digital-Receiver einmal in der Woche nachts im Standby-Betrieb
      5. lassen (nicht stromlos machen).
      6. Programmpakete, die Sie abonniert haben, sind plötzlich nicht mehr
      7. freigeschaltet. Dies wird Ihnen durch eine der oben genannten
      8. Fehlermeldungen am Bildschirm angezeigt.
      9. Geben Sie bitte Ihre vollständige SmartCard-Nummer ein, stecken Sie
      10. diese wieder korrekt in den Kartenschlitz Ihres Digital-Receivers und
      11. klicken Sie auf Weiter. Sie erhalten dann eine Rückmeldung, ob das
      12. Freischaltungssignal erfolgreich gesendet werden konnte. Diese Funktion
      13. kann aus technischen Gründen nur einmal innerhalb von 7 Tagen
      14. durchgeführt werden.
      15. Wenn Sie weiterhin Probleme mit der Freischaltung haben, kontaktieren Sie bitte unsere Hotline (Mo-Fr 0-24 Uhr):
      16. 0800 / 700 11 77 (Kostenlos aus dem Unitymedia-Netz) oder für Nordrhein-Westfalen & Hessen:0221 / 466 191 00
      17. für Baden-Württemberg:
      18. 0711 / 548 881 50
      Alles anzeigen

      Edit: I'm glad it works now :thumbsup:
      Mut@nt HD51(HDF) Xpeed LX2(HDF) Atemio 6200(HDF) Atemio 6100(HDF)

    Unsere Partnerboards

    ^
    Flag Counter