DOSCAM funktioniert nicht mehr

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • DOSCAM funktioniert nicht mehr

      Hallo liebe Mitglieder,
      ich habe leider das Problem, dass mein doscam nicht mehr funktioniert bzw. meine Karte gelesen der Bildschirm dunkel bleibt. Bis Mitte Mai hat alles funktioniert, dann habe ich alles abgeschaltet und bin in Urlaub gegangen und jetzt eingeschaltet und funktioniert nicht mehr. Alles war während der Urlaubszeit stromlos. Kann es damit zusammenhängen, dass die Aktivierung der Karte bis Juni lief und sie neu aktiviert werden muss? Habe keine Ahnung wie ich weiter machen soll. Überlege jetzt oscam zu installieren. Habt Ihr Vorschläge? Im voraus schon besten Dank. :danke:
    • wenn die Karte lief dann lass es so wie es ist

      dann 0180 619 0000 bei sky anrufen - drück 0 -- dann deine Kartennummer eintippern und sekunden später ist Aktivierung und Verlängerung da - also in deinem log

      Östereicher nummer: 0149 168 830

      dann im log richtiges EMM raussuchen, draufschreiben und schon gehts wieder

      edit: wenn du ein skysender an machst - könnte der EMM sogar schon ins EMM Log geschrieben haben, schau einfach mal ins log rein
      1x Triplex alter Sattuner + dvb-C/T --- 2x Triplex neuer Sattuner + Dvb-C/T2 --- LX 2 1 Sat+ Dvb-C/T2 --- 4x Dbox1 --- 2x Pace --- 1x GM990 reloaded 1x Pingulux (alte)
    • Hier meine Log-Datei. Sorry, wollte sie immer als Datei hochladen.

      -------------------------------------------------------------------------------
      >> DOSCam << started at Thu Jul 16 13:17:13 2015
      -------------------------------------------------------------------------------
      2015/07/16 13:17:13 0 s >> DOSCam << started, V0.25 (mipsel-unknown-linux-gnu-libusb)
      2015/07/16 13:17:13 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 540
      2015/07/16 13:17:13 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
      2015/07/16 13:17:13 0 s signal handling initialized
      2015/07/16 13:17:13 0 s monitor: initialized (fd=5, port=988)
      2015/07/16 13:17:13 0 s cccam (used for zeroconf): initialized (fd=6, port=21526)
      2015/07/16 13:17:13 0 s Slot1 [internal] creating thread for device /dev/sci0
      2015/07/16 13:17:13 0 s Slot2 [internal] creating thread for device /dev/sci1
      2015/07/16 13:17:13 0 s keyfile [constcw] creating thread for device /usr/keys/SoftCam.Key
      2015/07/16 13:17:13 0 s loadbalancer: can't read from file /tmp/.doscam/stat
      2015/07/16 13:17:13 0 s waiting for local card init
      2015/07/16 13:17:13 53CFA0 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:17:13 53CFA0 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:17:13 532520 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
      2015/07/16 13:17:13 53EB28 p EMU init failed - Keyfile not found!
      2015/07/16 13:17:13 77700468 h webif: decompressed 50154 bytes back into 144440 bytes
      2015/07/16 13:17:13 77700468 h HTTP Server running. ip=0.0.0.0 port=8080
      2015/07/16 13:17:56 0 s init for all local cards done
      2015/07/16 13:17:56 0 s anti cascading disabled
      2015/07/16 13:17:56 5412A0 c plain dvbapi-client granted (DVBApi, au=on (5 reader))
      2015/07/16 13:17:56 5412A0 c Detected /dev/dvb/adapter0/demux0 Api: 0
      2015/07/16 13:17:56 77700468 h HTTP Server stopped
      2015/07/16 13:17:56 0 s loadbalancer: statistic saved 0 records to /tmp/.doscam/stat in 0ms
      2015/07/16 13:17:56 0 s killing client DVBApi
      2015/07/16 13:17:56 0 s Slot1 [internal] Killing reader
      2015/07/16 13:17:56 0 s Slot2 [internal] Killing reader
      2015/07/16 13:17:56 0 s keyfile [constcw] Killing reader
      2015/07/16 13:17:56 0 s userdb 2 accounts freed
      2015/07/16 13:17:56 0 s readerdb 5 readers freed
      2015/07/16 13:17:56 0 s DOSCam down

      -------------------------------------------------------------------------------
      >> DOSCam << started at Thu Jan 1 01:00:25 1970
      -------------------------------------------------------------------------------
      1970/01/01 01:00:25 0 s >> DOSCam << started, V0.25 (mipsel-unknown-linux-gnu-libusb)
      1970/01/01 01:00:25 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 298
      1970/01/01 01:00:25 0 s The current system time is smaller than the build date (May 7 2015). Waiting up to 20 seconds for time to correct
      2015/07/16 13:18:54 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
      2015/07/16 13:18:54 0 s signal handling initialized
      2015/07/16 13:18:54 0 s monitor: initialized (fd=4, port=988)
      2015/07/16 13:18:54 0 s cccam (used for zeroconf): initialized (fd=5, port=21526)
      2015/07/16 13:18:54 0 s Slot1 [internal] creating thread for device /dev/sci0
      2015/07/16 13:18:54 0 s Slot2 [internal] creating thread for device /dev/sci1
      2015/07/16 13:18:54 0 s keyfile [constcw] creating thread for device /usr/keys/SoftCam.Key
      2015/07/16 13:18:54 0 s loadbalancer: can't read from file /tmp/.doscam/stat
      2015/07/16 13:18:54 0 s waiting for local card init
      2015/07/16 13:18:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:18:54 532460 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
      2015/07/16 13:18:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:18:54 53EAF8 p EMU init failed - Keyfile not found!
      2015/07/16 13:18:54 77800468 h webif: decompressed 50154 bytes back into 144440 bytes
      2015/07/16 13:18:54 77800468 h HTTP Server running. ip=0.0.0.0 port=8080
      2015/07/16 13:19:53 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:19:53 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:20:03 532460 r Slot1 [internal] card detected
      2015/07/16 13:20:04 532460 r Slot1 [internal] ATR: 3F FF 14 25 03 10 80 54 B0 01 69 FF 4A 50 70 00 00 4B 57 01 00 00
      2015/07/16 13:20:04 532460 r Slot1 [internal] Init card protocol T0, FI=1, F=372, D=8, N=3
      2015/07/16 13:20:04 532460 r Slot1 [internal] Calculated work ETU is 9.30 us
      2015/07/16 13:20:04 532460 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
      2015/07/16 13:20:05 532460 r Slot1 [internal] Card type: KWPE
      2015/07/16 13:20:05 532460 r Slot1 [internal] Rom version: 10T1
      2015/07/16 13:20:05 532460 r Slot1 [internal] No TA1 change for this card is possible by ins7E11
      2015/07/16 13:20:05 532460 r Slot1 [internal] parental lock setting: FF FF FF FF
      2015/07/16 13:20:05 532460 r Slot1 [internal] parental lock disabled
      2015/07/16 13:20:05 532460 r Slot1 [internal] parental lock setting after disabling: FF FF FF FF
      2015/07/16 13:20:05 532460 r Slot1 [internal] type: VideoGuard Kabel BW (098E), caid: 098E
      2015/07/16 13:20:05 532460 r Slot1 [internal] serial: ########, BoxID: ########, baseyear: 2004
      2015/07/16 13:20:05 532460 r Slot1 [internal] ready for requests
      2015/07/16 13:20:05 532460 r Slot1 [internal] found card system videoguard2
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] card detected
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] type: VideoGuard Kabel BW (098E)
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 007b, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 007d, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 0081, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 008e, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00ac, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00ad, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00ae, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00af, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00c0, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00c1, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00f3, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:05 532460 r Slot1 [videoguard2] tier: 00ff, expiry date: 2015/07/04-01:00:00
      2015/07/16 13:20:53 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:20:53 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:21:53 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:21:53 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:22:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:22:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:23:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:23:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:23:59 532460 r Slot1 [videoguard2] card ejected
      2015/07/16 13:24:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:24:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:25:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:25:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:26:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:26:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:27:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:27:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:28:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:28:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
      2015/07/16 13:29:54 53CF70 r Slot2 [internal] ERROR: Opening device /dev/sci1 (errno=2 No such file or directory)
      2015/07/16 13:29:54 53CF70 r Slot2 [internal] Cannot open device: /dev/sci1
    • siehe OBEN mein Beitrag - du must anrufen und brauchst neue Aktivierung bzw im log emm.log steht eventuell schon richtige emm drinne

      deine Karte ist abgelaufen
      1x Triplex alter Sattuner + dvb-C/T --- 2x Triplex neuer Sattuner + Dvb-C/T2 --- LX 2 1 Sat+ Dvb-C/T2 --- 4x Dbox1 --- 2x Pace --- 1x GM990 reloaded 1x Pingulux (alte)
    • wenn du im webif von doscam bist - drück auf files dann doscam.cfg

      da muss sowas dastehn und dein pfad den du angegeben haben müsstest

      [global]
      disablelog = 1
      logfile = /usr/local/etc/doscam.log
      clientmaxidle = 20
      bindwait = 30
      netprio = 1
      unlockparental = 0
      emmlogdir = /usr/local/etc/

      letzte zeile also emmlogdir = hier wo dein log liegt
      1x Triplex alter Sattuner + dvb-C/T --- 2x Triplex neuer Sattuner + Dvb-C/T2 --- LX 2 1 Sat+ Dvb-C/T2 --- 4x Dbox1 --- 2x Pace --- 1x GM990 reloaded 1x Pingulux (alte)
    • Sorry, beim letzten mal hatte ich Doscam installiert und Karte reingesteckt und es lief. OK, hatte nicht nach EMMs geschaut weil es lief. Daher bin ich etwas durcheinander gekommen weil ich jetzt mit doscam keine EMMs finde. Trotzdem vielen Dank für die Hilfen. Werde jetzt Oscam probieren.
    • Habe jetzt Oscam installiert. Leider komme ich nicht weiter, da ich den V23-Reader nicht finden kann. Oder stimmt soweit alles und ich muss erneut auf Karte freischalten gehen? Hier die oscam.log.

      Spoiler anzeigen
      -------------------------------------------------------------------------------
      >> OSCam << cardserver log switched at Fri Jul 17 12:48:16 2015
      -------------------------------------------------------------------------------
      2015/07/17 12:48:16 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10869 (mipsel-unknown-linux-gnu-ssl-libusb)
      2015/07/17 12:48:16 00000000 s (main) System name = Linux
      2015/07/17 12:48:16 00000000 s (main) Host name = optimussos3plus
      2015/07/17 12:48:16 00000000 s (main) Release = 3.9.7
      2015/07/17 12:48:16 00000000 s (main) Version = #1 SMP Thu May 7 22:20:14 CEST 2015
      2015/07/17 12:48:16 00000000 s (main) Machine = mips
      2015/07/17 12:48:16 00000000 s (main) Stb model = dm8000
      2015/07/17 12:48:16 00000000 s (main) Stb vumodel = vusolo2
      2015/07/17 12:48:16 00000000 s (main) Stb boxtype = dm8000
      2015/07/17 12:48:16 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 563
      2015/07/17 12:48:16 00000000 s (config) services reloaded: 0 services freed, 42 services loaded, rejected 0
      2015/07/17 12:48:16 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
      2015/07/17 12:48:16 00000000 s (main) signal handling initialized
      2015/07/17 12:48:16 00000000 s (config) 912 provid's loaded
      2015/07/17 12:48:16 00000000 s (config) 278 service-id's loaded in 4 ms
      2015/07/17 12:48:16 00000000 s (config) 42 tier-id's loaded
      2015/07/17 12:48:16 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
      2015/07/17 12:48:16 00000000 s (main) waiting for local card init
      2015/07/17 12:48:16 5FC555F5 h (webif) webif: decompressed 155036 bytes back into 373288 bytes
      2015/07/17 12:48:16 5FC555F5 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
      2015/07/17 12:48:19 00000000 s (main) init for all local cards done
      2015/07/17 12:48:19 00000000 s (anticasc) anti cascading disabled
      2015/07/17 12:48:19 474025FF c (client) plain dvbapi-client granted (dvbapiau, au=auto (22 reader))
      2015/07/17 12:48:19 474025FF c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
      2015/07/17 12:48:21 474025FF c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1850 ECM_PID: 195C PROVID: 000000
      2015/07/17 12:48:21 474025FF c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1838 ECM_PID: 1C5C PROVID: 000000
      2015/07/17 12:48:21 474025FF c (dvbapi) Demuxer 0 ecmpid 2 CAID: 098E ECM_PID: 1E5C PROVID: 000000
      2015/07/17 12:48:21 474025FF c (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in PMT
      2015/07/17 12:48:21 474025FF c (dvbapi) Demuxer 0 serving srvid 006C (1850@000000:006C unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0063
      2015/07/17 12:48:21 474025FF c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
      2015/07/17 12:48:23 474025FF c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
      2015/07/17 12:49:32 474025FF c (-) -- Skipped 22 duplicated log lines --
      2015/07/17 12:50:32 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 12:51:32 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 12:52:32 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 12:52:38 5FC555F5 h (-) -- Skipped 2 duplicated log lines --
      2015/07/17 12:52:38 5FC555F5 h (webif) Refresh Readers requested by WebIF from 192.168.0.10
      2015/07/17 12:52:38 474025FF c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
      2015/07/17 12:53:11 5FC555F5 h (-) -- Skipped 10 duplicated log lines --
      2015/07/17 12:53:11 5FC555F5 h (config) readerdb 22 readers freed
      2015/07/17 12:53:11 5FC555F5 h (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
      2015/07/17 12:53:12 474025FF c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
      2015/07/17 12:54:12 474025FF c (-) -- Skipped 19 duplicated log lines --
      2015/07/17 12:55:12 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 12:56:12 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 12:57:12 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 12:58:12 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 12:59:12 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:00:12 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:01:12 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:02:13 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:03:13 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:04:13 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:05:13 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:06:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:07:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:08:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:09:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:10:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:11:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:12:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:13:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:14:14 474025FF c (-) -- Skipped 20 duplicated log lines --
      2015/07/17 13:15:14 474025FF c (-) -- Skipped 20 duplicated log lines --​

      Danke.
    • Hier meine doscam.cfg:

      Spoiler anzeigen
      [global]
      logfile = /home/root/logs/doscam.log
      waitforcards_extra_delay = 3000
      dropdups = 1
      lb_retrylimit = 1600

      [monitor]
      hideclient_to = 15

      [webif]
      httpport = 8080
      httphelplang = de
      httprefresh = 30
      httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.0-10.255.255.255
      hideclient_to = 15

      [reader]
      label = Slot1
      protocol = internal
      device = /dev/sci0
      group = 1
      emmcache = 1,1,10
      blockemm-u = 1
      saveemm-u = 1

      [reader]
      label = Slot2
      protocol = internal
      device = /dev/sci1
      group = 1
      emmcache = 1,1,10
      blockemm-u = 1
      saveemm-u = 1

      [reader]
      label = cccam_server
      enable = 0
      protocol = cccam
      device = 192.168.1.1,12000
      user = user
      password = pass
      inactivitytimeout = 30
      ccckeepalive = 1
      group = 2

      [reader]
      label = camd3_server
      enable = 0
      protocol = camd35
      device = 192.168.1.1,22222
      user = user
      password = pass
      group = 3

      [reader]
      label = keyfile
      protocol = constcw
      device = /usr/keys/SoftCam.Key
      group = 4

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Nobsy ()

    • [reader]
      label = Slot2
      enable = 0
      protocol = internal
      device = /dev/sci1
      group = 1
      emmcache = 1,1,10
      blockemm-u = 1
      saveemm-u = 1

      disable mal den 2ten reader wie oben das rot markierte
      Wähle einen Job, den du liebst, und du wirst nie wieder arbeiten müssen.
      Konfuzius

    Flag Counter