Bootloader HD2400 (V36) 20150522

changelog:

• Bootloader V36
  
• support images upto 500MB
  
• support multiboot by kexec
  
• support systemd images
  
• support images startup from USB, SSD, HDD and SDcard.

Before you install the new bootloader, please been certain there is no map called /hd2400 on your USB stick.
It can happen that the bootloader will not install when a splash or force file is in the /hd2400 map.

Follow the next steps to successful update the bootloader.

1. Remove the map /hd2400 when it's already on your USB stick.
   
2. Unzip the file to an USB stick. (You will see a map called /hd2400 with 2 files imageversion and hd2400-cfe.bin)
   
3. Place the USB stick in an USB socket of the HD2400.
   
4. Start the box with the powerswitch at the back of the box.
   
5. The display will show a message, to load the new bootloader you will need to press the second button which has a down arrowhead (V) symbol.
   
6. The display will show flashing for about 10 secondes and after this the HD2400 will reboot automatically.