Engineer Khan's Backup of OpenAR-P Enigma2 for Spark 7111 - 05-08-2014

    • Engineer Khan's Backup of OpenAR-P Enigma2 for Spark 7111 - 05-08-2014

      Mates:

      Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon TaapatAR-P_OE2.0_alien_epl3-git-05-06-14_9b05a09. All credit goes to Taapat for his hard work.

      Cams:
      1. CCcam
      2. Mgcamd
      3. Oscam (Oscam ymod v18t48 )
      4. Camd3

      Plugins:
      1. MediaPortal 5.3.3
      2. CoolTV Guide 6.4.0
      3. EPG Translator
      4. Subtitle Player by DD
      5. TMDB Info
      6. HDD Manager
      7. Dream Explorer
      8. Openwebif
      9. Wikipedia
      10. Google News

      Extra Skins Installed:
      1. dTV-Reloaded HD (mod engineerkhan15)
      2. dreamTV-HD (mod engineerkhan15)
      3. DreamMM-HD (mod engineerkhan15)
      4. MyMetrix (with weather plugin)
      5. PLI-HD

      How to install:
      1. Only use Spark plugin "e2_upgrade" to install this backup successfully.
      2. Extract it and copy "back_of_e2" folder on a USB Flash Disk.
      3. Connect USB Flash Disk to your Spark receiver while the receiver is running in Spark.
      4. Go to Menu>Plugin and start e2_upgrade" plugin.
      5. Press OK button on remote, scroll down to "back_of_e2" folder and press RED button to select it.
      6. Press RED button again to start installing this backup. After some time installation will be completed.

      How to Boot into Enigma2:
      1. To boot into your new Enigma2 image, power off your receiver from back side power switch.
      2. Now, while keeping pressed the front panel OK button on your receiver, power on again your receiver using back side power switch, after few seconds, you will see "Forc" on your receiver display.
      3. Leave OK button now and press channel down button on your receiver's front panel, you will see "En16" on your receiver display.
      4. Now press OK button and receiver will boot into Enigma2 image.

      FTP and Telnet Login Details:
      User: root
      Password: root

      Screenshots:

      dreamTV-HD Skin:



      dTV Reloaded-HD Skin:



      DreamMM-HD Skin:



      MyMetrix-HD Skin:



      PLI-HD Skin:



      Plugins-1:



      Plugins-2:



      Plugins-3:



      Softcams:



      File Password: engineerkhan15

      If you like this post, press thanks button.
      Dateien

    • @etmmast:
      I think, there was some problem during installation. Can you boot back to Spark OS? If yes, then boot to Spark and reinstall the backup with Spark plugin "e2_upgrade". Make sure that there should be two files "e2jffs2.img" and "uImage" in the folder "back_of_e2" on your USB flash disk while installing.
      Try again and let me know.


      Regards,
      engineerkhan15

    • Hello Everyone

      I tried the forum hledam my problem but nothing I nenasel.Prosim assistance relating to audio programs in HD .In some HD programs, the sound is very weak and does not increase the volume to .When beet into SPARK and there everything is fine.

      Thanks so much for the information what to do about it.

    Flag Counter