Angepinnt ET 4000 Bootloader für 751 Mhz CPU-Speed - unofficial!

Googgi · 22. September 2014, 07:46

try it again.

it was not successfull, or you used the wrong bootloader.

you can control success with telnet as you did before.

okidokiss · 26. September 2014, 19:12

No success. Followed the guide.
At boot I can see the right sequence of front LED's indicating that is flashing, automatic reboot after that. Seems that everything is OK.
But, when typing cat /proc/cpuinfo always get cpu MHz : 501.023
The file is: ET4000_751MHz-unofficial_Bootloader.zip

Googgi schrieb:

try it again.

it was not successfull, or you used the wrong bootloader.

you can control success with telnet as you did before.

Googgi · 26. September 2014, 20:20

try pressing CH+ instead CH-

okidokiss · 27. September 2014, 14:01

Googgi schrieb:

try pressing CH+ instead CH-

Well, don't know how ... I just killed my box.
No front light now, nothing. Just network lights when power on

Is there any guide to recover?

Googgi · 27. September 2014, 18:34

How do you bricked your box?

(mobil gesendet)

okidokiss · 27. September 2014, 18:55

Googgi schrieb:

How do you bricked your box?

(mobil gesendet)

Well, there's no way to flash new bootloader, so I've tried to power up while pressing ch-.
after that, all light off.

Is there any jtag how to?

Googgi · 27. September 2014, 19:41

i cant believe, that you bricked your box with this action.

power off, wait 10 Minutes, then it should start again.

okidokiss · 27. September 2014, 19:51

Googgi schrieb:

i cant believe, that you bricked your box with this action.

power off, wait 10 Minutes, then it should start again.

It has been powered off 'till now, about 1 hour. Powered on and still no lights on

Googgi · 27. September 2014, 21:01

oh....

happens

i have no clue about jtag

okidokiss · 27. September 2014, 21:07

Googgi schrieb:

oh.... happens

i have no clue about jtag

Yah! It's a piece of shit now

jarap · 31. März 2018, 08:42

die CPU ist auch in anderen Boxen verbaut...z.B. UE Plus
wie kann ich die Taktfrequenz auslesen/händisch einstellen?

zeini · 31. März 2018, 09:04

Unter Information wird zumindest in neueren Images die Taktfrequenz angezeigt.
Einstellen geht nur mit Bootloader.

Teilen