Zitat von Googgi: „oh.... happens i have no clue about jtag“ Yah! It's a piece of shit now

Zitat von Googgi: „i cant believe, that you bricked your box with this action. power off, wait 10 Minutes, then it should start again.“ It has been powered off 'till now, about 1 hour. Powered on and still no lights on

Zitat von Googgi: „How do you bricked your box? (mobil gesendet)“ Well, there's no way to flash new bootloader, so I've tried to power up while pressing ch-. after that, all light off. Is there any jtag how to?

Zitat von Googgi: „try pressing CH+ instead CH-“ Well, don't know how ... I just killed my box. No front light now, nothing. Just network lights when power on Is there any guide to recover?

No success. Followed the guide. At boot I can see the right sequence of front LED's indicating that is flashing, automatic reboot after that. Seems that everything is OK. But, when typing cat /proc/cpuinfo always get cpu MHz : 501.023 The file is: ET4000_751MHz-unofficial_Bootloader.zip Zitat von Googgi: „try it again. it was not successfull, or you used the wrong bootloader. you can control success with telnet as you did before.“

Zitat von Koivo: „Do you have turned off and on the box?“ Yes, followed the instructions! Is there any way to know if was successfull, beside this one?

Zitat von zeini: „Write in telnet: cat proc/cpuinfo“ I did. But if this is correct, isn't running at 751Mhz: I'm sure I've flashed the right bootloader. Zitat: „root@et4x00:~# cat /proc/cpuinfo system type : BCM7358A1 STB platform processor : 0 cpu model : Broadcom BMIPS3300 V3.2 BogoMIPS : 497.66 cpu MHz : 501.008 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : no ASEs implemented : mips16 shadow register sets : 1 kscratch regi…

Hi All, I've flashed this bootloader. How can I check if my cpu is running at 751MHz? Thank you!