Dateiname: Evo M7 PBnigma Remote Control /FB Quick Guide Dateiübermittler: delfi Datei übermittelt: 17 Sep 2013 Dateikategorie: OptiBox Quick guide for PBnigma VX II - Evo M7 remote control. Image versions from 13 September 2013 Links gelöscht by googgi Bitte Boardregeln beachten! The full remote is now sorted - the first in this Universe...

Dateiname: Optibox Evo M7 PBNIGMA 2013-10-10 Dateiübermittler: delfi Datei übermittelt: 11 Okt 2013 Dateikategorie: OptiBox r6 Maintenace build Sorry, you may have to register to get it, as the rules of the forum may have changed in the meantime...

I installed the new DUAL version but I have no internet (only the 3G stick), so only the foundations can be tested by me today... The first one to boot (MP) I configured as best I could... I put in my list of channels, but it was not exactly seen correctly, 2 out of 4 satellites are missing, even though I correctly configured the tuners... I went to scan the missing 2 satellites and MP did see a couple of TPs I knew were strong enough, so I scanned with NIT from there and it worked - so why didn…

Echhh... My old PC (with serial ports) is in the basement, under a lot of stuff... I do not have the serial to USB adapter and I can't go out, as a plumber is supposed to have been here at 10 - but this is Italy, you know... Grrrrr....

OK, as you can figure it out, I do have PuTTy... And I will try it later on, ASAIC... Just give us the link, please, where to get the other piece of SW, please...

No, once it got stuck it would not move from the 00:00 on VFD and I didn't try the telnet commands... I am now testing Neutrino, if nothing else then to discard the channels list etc. But I need a "bit" more info how to set up null modem and telnet, please...

Please, describe how in detail and I will find my null modem cable... Alternatively, would Quellcode (3 Zeilen) in Telnet suffice?

Aha! Muchas gracias!

spark7162_dual_g5905_hale_r455_nmpe_r5564_nhd2e_r1561_flash.zip - no go, sadly... Any directions, please?

Cool! I must find it first... P.S. Explain a bit more the last bits - I can't make heads or tails of that, please...

I see Mikam, that may be it, somehow - after I send the channels list and configure the tuner, I must reboot and - I always get stuck there, one or two reboots after that...... Trying Neutrino now, to test if there is anything else the matter...

One 11147 and 3 11151 installations down the line I get the same error - it can not boot. It starts and it ends on the clock (00:00) and it can not move on from that point.... I even went to Spark > MENU > Plugins > WLTool > erased E2 > then I did everything from scratch and again, after 2-3 restarts - stuck... I didn't even manage to get to OSCam etc. Just basics: interface, network, channels list in, tuner configuration and - BOOM! Today I have no internet via modem, just a 3G stick, so couldn…

11147 and the latest do not boot in my A2, after configuring it and restarting E2... Any similar experiences, guy?

Yo, m8s! Anything new and cool to test for you, please? Cheerio!

Thanks to both. As I said, I am a lay person but I can see a lot of problems and confusion in all this... A proper device manager ought to be the way, I think... For most users - as most users are not IT geeks... please, remember that... For most users long technical texts about Linux are neither here, nor there, they make us even more confused, so clear guidance is highly appreciated... when people are decisive and non-hedge-betting, that is...

Yeah, thanx, as you could have seen it on this forum, I know that... In different boxes and in different images, I try putting it on USB stick (with the AZbug HD exception - 1GB DOM)... In Alien2, with HDMU, AR-P, RSP etc. If at all possible. I do not do it if I have to put it on my USB HDD. For that, one needs a really good device/SWAP manager, giving you - the user - options... And this is a problem in most images - no flexibility, no options given to the user. I think that is bad and it puts …

Hmmm, after a while this one also gets clogged up and slows down significantly, plus auto-reboots every so often... More memory leaks or something deeper than E2 compiling?

This (e2_211SPARK7162_RSP_FirstStableMP Eplayer3 (ffm) Media Framework) is a very promising image! I am very pleasantly surprised!!! I have had some GSOD, I had to struggle a bit to get OSCam to work with keys (emulator) but I managed, eventually, with some patience... I even managed to play DVD folders from NAS (with MP2)! A screwed up restart wouldn't show my shared folders but I got it to work!!! Some restarts have wrongly stacked up things, so stuff wouldn't work but reboot once or twice and…

Indeed! Btw, I did not remove CrossEPG etc. Too many bugs to mention, on the face of it... It would be good if we had a simple to install original PKT image , mind...

Changed an OSCam version and oscam.keys and GSOD, sadly... Went back and tried stopping the T39 Ymod > GSOD... I wanted to restart it, to test the oscam.keys. I took the keys file from CCcam, where it's working... But in Hyperion it does not... Even after restarts... Crashlogs attached...