Zitat von Thomas66: „sorry ich versteh nicht was du möchtest das bild hat auch nichts mit aufnahmen etc zu tun mit timern auch nicht ebenso versteh ich nicht was das mit satelites.xml zu tun hat die kann jeder verwenden wie er lust hat“ Das bild präsentieret die lätzte aufnehmen (recordings) jeden mit 0-8 MB ist ei aufnahme das ist abbrucht (timer ist genutz fur alle aunehmen). Etwas machts das - älteren image von december ist gut - sowie ich es nicht update (keine abbruchte aufnehmen). Satellit…

Sorry to say but there are still big problems with timer and recordings. In the beginnig everything seemed ok but now when i have been recording more it seem that i get quit a lot of intreptued recordings because of something so i have to back to the good 23.12 version of the image and use it without any of the updates that are available. In that i can get recordings to function and aswell the LCD thing i mentioned about here before works the way i like. I put here a picture how the recordings l…

1 thing that i dont find anymore in the image which were good. 1) LCD options (receivers front panel). In this last image the options to change colors (green/red showing different things in the receivers front panel) has disappered (i do not anyway find them anymore), I think this is a major disadvantage.

The recording using the timer has functioned (just one boken recording so far from quite a lot made) as it should with this version, thank you, good work!!

neutrino3-MP-martii-FFTeam-23-12-2014 - yes i use this and the problems occured when there was a major update in the updates to this image (through the update function in the image) approx the 1.4.2015. Is the 1.4.2015 image the image you refer to the one efter the big update that was installed through the internetupdate in the image - where for example the layout/colors where changed? After i made this large update my recording problems started and that is wy I went back to this un updated 23.1…

About the recording problems i mentioned earlier. I do use a 1TB 2,5 inch usb harddrive. I had all the updates installed the image thet where requested to be installed through its internet update function (last updates was made a couple a days ago - i do think then there was only the neutrino part to be updated). No I went back to the orginal image (23.12.2014) that all theese updates are made on - Now the recordings using timer do function without any problem - no interupted recordings. I´m goi…

OK changes in the last update - but one change big backwards (recording). After the last update there has been quite a lot of problems with recordings. The recording stops in the middle or imediatly after start when using timer. Earlier there where minor problems though just now and then nothing that made it frustrating. Now at least 1 out of 3 recordings are interupted/stoped in the middle.

Zitat von Thomas66: „installiere einfach image neu ODER lösche in var/tuxbox/config neutrino.conf reboot fertig“ Thank you. Another way to get the old recordings visible is to go to MAIN MENU=>SETTINGS=>MEDIA=>MOVIEBROWSER=>PATHS and add a ADDITIONAL PATH (/media/sda1/movies) and change USE DIRECTORY to YES. Now you can find this path in MAIN MENU=>MEDIA=>MOVIEBROWSER by pressing the GREEN button (filter:/media/sda1/aufnahme) change this filter path to filter:/media/sda1/movies/ and when you go …

Zitat von chaoscreator: „I did do the Neutrino mp update as recomended but it did not have any effect on this Moviebrowser problem. Still i only can see the recordings i have made with this neutrino image not the old recordings i made with the earlier and that still are on the harddrive (did check it by connecting the harddrive to Etrayz NAS. I´m using a 2,5" USB harddrive that is connected to the usb on the backpanel of the receiver. “ The problem why the old recordings are not shown with this …

I did do the Neutrino mp update as recomended but it did not have any effect on this Moviebrowser problem. Still i only can see the recordings i have made with this neutrino image not the old recordings i made with the earlier and that still are on the harddrive (did check it by connecting the harddrive to Etrayz NAS. I´m using a 2,5" USB harddrive that is connected to the usb on the backpanel of the receiver.

Thanks for a updated image. Seems like the moviebrowser don´t find the recorded files on the connected USB harddisk thats been used on the previous neutrino image. If I record something it will be like the first recording on the harddisk which it ain´t?? Strange!

Zitat von DrStoned: „Try to increase Menu -> Service -> Setup tuner -> Tune retries“ Yes i have done that increased the Tune timeout to 6000ms and put the Tune retries to 5 but haven´t helped (have a diseqc 1.1 configuration with 13 lnb behind EMP Centauri 16/1)

No problems with the recordings and the subtitles any more (thanks for that and all the other upgrades). But quit a lot of "´channel nicht verfugbar" situations where you have to restart Neutrino to get it working again.

The update did not fix this problem (so went again back to december 13th version wich is ok with this thing): "The subtitles of recordings are displayed too early (C more Nordic channels). When I went back to december version (i think 13.12.2013) on the neutrino image the subtiltes of same recording are shown as they should."

Have some problems with this version in recordings. The subtitles of recordings are displayed too early (C more Nordic channels). When I went back to december version (i think 13.12.2013) on the neutrino image the subtiltes of same recording are shown as they should. Have also had problems with the tuner gone missing on a Diseqc 1.1 (GM Reloaded box and EMP Centauri 16/1 switch) setup once and then when going from one satellite to one other. Have to restart the tuner or reeboot to get the pictur…

Zitat von martii: „Zitat von chaoscreator: „When starting a recording from MEDIA=>TS MOVIEBROWSER and when pushing GREEN button and choosing the subtitles you want to use the box always starts reebooting (somekind of bug). “ Thanks, fixed that (at least in GIT).“ Thank you! Did the the red button update and a reboot of the box. Now i can choose subtitle and the movie continues as it should - with the subtitle

Good image but problem with subtitles with recordings from Telenor C More channels with subtitles. When starting a recording from MEDIA=>TS MOVIEBROWSER and when pushing GREEN button and choosing the subtitles you want to use the box always starts reebooting (somekind of bug). The same problem i had with the earlier image (some one from the summer) orginally it was ok but after some of the red button updates it started aswell to reboot after choosing the wanted subtitle. As long as it like this …

Neutrino is the best image for the box no lag with the remote control as in orginal image and aswell in E2 images. Everything I nedd functions well diseq 1.1 setup with 16 lnb, cmore card fuctions with "the expermental" emu without any kind of configuration, recordings including all subtitles and audios works fine when you make the setups needed, etc... The only thing that is better in orginal image is the channel scan features (= blind scan).

Is it possible to make neutrino image do blindscan on Fulan sti 7111 and 7162 boxes as orginal image can do? Or is there something that makes it complicated?

The image as older Neutrino images makes a short, short break (the picture stops) on HD channels for a very short time (millesconds??) but anyway so long time that you can notice it. It makes it once a second.